On Fri, Nov 14, 2014 at 5:32 PM, Liviu Ionescu <i...@livius.net> wrote: > > On 14 Nov 2014, at 03:01, Alistair Francis <alistai...@gmail.com> wrote: > >> I haven't looked into CMSIS or using SysTick, so I can't confirm that >> they work. I don't have any experience with using either, so I can't >> really be of much help with those. > > when you'll have some time, perhaps it would be useful to install GNU ARM > Eclipse and generate a project for your board, run it on the physical > hardware, then test it on QEMU.
Sorry about the long delay. I probably won't be able to do that for some time, I have other other aspects for the project that are higher priority. If I get a chance I will though > >> I have implementations for the more important system peripherals in >> the STM32F2xx/4xx SoC families, including GPIO. > > did you implement the clock related registers? PLL & others? these are used > during CMSIS SystemInit() and are mandatory, otherwise emulation will either > fail or not be realistic. Not specifically. I did implement a timer peripheral, but I assume that isn't the same. I didn't have any issues with timing and unrealistic emulation, but I'm not looking for exact time accurate emulations Thanks, Alistair > >> You are welcome to use >> those if you want > > thank you! > >> above my use case is more aimed at higher level machine/peripherals >> support > > yes, that's great, but without a proper base, like system registers and > debug, usability may be not be as good as expected. > > > regards, > > Liviu > >
