[Qemu-devel] [PATCH v1 RFC 9/9] qemu-iotests: s390x: fix test 051

[Mao Chuan Li]

The tests for device type "ide_cd" are skipped for the s390 platform.
The default device id of hard disk on the s390 platform differs to that
of the x86 platform. A new variable device_id is defined and "virtio0"
set for the s390 platform. A s390 platform specific output file is also
needed.

Reviewed-by:   Michael Mueller <m...@linux.vnet.ibm.com>
Signed-off-by: Mao Chuan Li <maoch...@linux.vnet.ibm.com>
---
 tests/qemu-iotests/051                 |  91 +++++---
 tests/qemu-iotests/051.s390-virtio.out | 377 +++++++++++++++++++++++++++++++++
 2 files changed, 439 insertions(+), 29 deletions(-)
 create mode 100644 tests/qemu-iotests/051.s390-virtio.out

diff --git a/tests/qemu-iotests/051 b/tests/qemu-iotests/051
index 11c858f..2b600df 100755
--- a/tests/qemu-iotests/051
+++ b/tests/qemu-iotests/051
@@ -137,13 +137,19 @@ run_qemu -drive if=ide
 run_qemu -drive if=virtio
 run_qemu -drive if=scsi
 
-run_qemu -drive if=none,id=disk -device ide-cd,drive=disk
-run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk
-
-run_qemu -drive if=none,id=disk -device ide-drive,drive=disk
-run_qemu -drive if=none,id=disk -device ide-hd,drive=disk
-run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk
-run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk
+case "$QEMU_DEFAULT_MACHINE" in
+    s390-virtio)
+        ;;
+    *)
+        run_qemu -drive if=none,id=disk -device ide-cd,drive=disk
+        run_qemu -drive if=none,id=disk -device lsi53c895a -device 
scsi-cd,drive=disk
+
+        run_qemu -drive if=none,id=disk -device ide-drive,drive=disk
+        run_qemu -drive if=none,id=disk -device ide-hd,drive=disk
+        run_qemu -drive if=none,id=disk -device lsi53c895a -device 
scsi-disk,drive=disk
+        run_qemu -drive if=none,id=disk -device lsi53c895a -device 
scsi-hd,drive=disk
+        ;;
+esac
 
 echo
 echo === Read-only ===
@@ -157,13 +163,19 @@ run_qemu -drive file="$TEST_IMG",if=ide,readonly=on
 run_qemu -drive file="$TEST_IMG",if=virtio,readonly=on
 run_qemu -drive file="$TEST_IMG",if=scsi,readonly=on
 
-run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device 
ide-cd,drive=disk
-run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device 
lsi53c895a -device scsi-cd,drive=disk
+case "$QEMU_DEFAULT_MACHINE" in
+    s390-virtio)
+        ;;
+    *)
+        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device 
ide-cd,drive=disk
+        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device 
lsi53c895a -device scsi-cd,drive=disk
 
-run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device 
ide-drive,drive=disk
-run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device 
ide-hd,drive=disk
-run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device 
lsi53c895a -device scsi-disk,drive=disk
-run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device 
lsi53c895a -device scsi-hd,drive=disk
+        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device 
ide-drive,drive=disk
+        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device 
ide-hd,drive=disk
+        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device 
lsi53c895a -device scsi-disk,drive=disk
+        run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device 
lsi53c895a -device scsi-hd,drive=disk
+        ;;
+esac
 
 echo
 echo === Cache modes ===
@@ -172,12 +184,24 @@ echo
 # Cannot use the test image because cache=none might not work on the host FS
 # Use cdrom so that we won't get errors about missing media
 
-run_qemu -drive media=cdrom,cache=none
-run_qemu -drive media=cdrom,cache=directsync
-run_qemu -drive media=cdrom,cache=writeback
-run_qemu -drive media=cdrom,cache=writethrough
-run_qemu -drive media=cdrom,cache=unsafe
-run_qemu -drive media=cdrom,cache=invalid_value
+case "$QEMU_DEFAULT_MACHINE" in
+    s390-virtio)
+        run_qemu -drive if=scsi,media=cdrom,cache=none
+        run_qemu -drive if=scsi,media=cdrom,cache=directsync
+        run_qemu -drive if=scsi,media=cdrom,cache=writeback
+        run_qemu -drive if=scsi,media=cdrom,cache=writethrough
+        run_qemu -drive if=scsi,media=cdrom,cache=unsafe
+        run_qemu -drive if=scsi,media=cdrom,cache=invalid_value
+        ;;
+    *)
+        run_qemu -drive media=cdrom,cache=none
+        run_qemu -drive media=cdrom,cache=directsync
+        run_qemu -drive media=cdrom,cache=writeback
+        run_qemu -drive media=cdrom,cache=writethrough
+        run_qemu -drive media=cdrom,cache=unsafe
+        run_qemu -drive media=cdrom,cache=invalid_value
+        ;;
+esac
 
 echo
 echo === Specifying the protocol layer ===
@@ -241,28 +265,37 @@ echo
 echo === Snapshot mode ===
 echo
 
+case "$QEMU_DEFAULT_MACHINE" in
+    s390-virtio)
+        device_id="virtio0"
+        ;;
+    *)
+        device_id="ide0-hd0"
+        ;;
+esac
+
 $QEMU_IO -c "write -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io
 
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive 
file="$TEST_IMG" -snapshot | _filter_qemu_io
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive 
file="$TEST_IMG",snapshot=on | _filter_qemu_io
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive 
file.filename="$TEST_IMG",driver=qcow2,snapshot=on | _filter_qemu_io
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive 
file.filename="$TEST_IMG",driver=qcow2 -snapshot | _filter_qemu_io
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive 
file="file:$TEST_IMG" -snapshot | _filter_qemu_io
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive 
file="file:$TEST_IMG",snapshot=on | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive 
file="$TEST_IMG" -snapshot | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive 
file="$TEST_IMG",snapshot=on | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive 
file.filename="$TEST_IMG",driver=qcow2,snapshot=on | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive 
file.filename="$TEST_IMG",driver=qcow2 -snapshot | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive 
file="file:$TEST_IMG" -snapshot | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive 
file="file:$TEST_IMG",snapshot=on | _filter_qemu_io
 
 # Opening a read-only file r/w with snapshot=on
 chmod u-w "$TEST_IMG"
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive 
file="$TEST_IMG" -snapshot | _filter_qemu_io
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive 
file="$TEST_IMG",snapshot=on | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive 
file="$TEST_IMG" -snapshot | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive 
file="$TEST_IMG",snapshot=on | _filter_qemu_io
 chmod u+w "$TEST_IMG"
 
 $QEMU_IO -c "read -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io
 
-echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive 
file="$TEST_IMG",snapshot=off | _filter_qemu_io
+echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive 
file="$TEST_IMG",snapshot=off | _filter_qemu_io
 
 $QEMU_IO -c "read -P 0x22 0 4k" "$TEST_IMG" | _filter_qemu_io
 
-echo -e 'qemu-io ide0-hd0 "write -P 0x33 0 4k"\ncommit ide0-hd0' | run_qemu 
-drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
+echo -e "qemu-io $device_id \"write -P 0x33 0 4k\"\ncommit $device_id" | 
run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
 
 $QEMU_IO -c "read -P 0x33 0 4k" "$TEST_IMG" | _filter_qemu_io
 
diff --git a/tests/qemu-iotests/051.s390-virtio.out 
b/tests/qemu-iotests/051.s390-virtio.out
new file mode 100644
index 0000000..751670f
--- /dev/null
+++ b/tests/qemu-iotests/051.s390-virtio.out
@@ -0,0 +1,377 @@
+QA output created by 051
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 
backing_file='TEST_DIR/t.IMGFMT.base'
+
+=== Unknown option ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=: could not 
open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'virtio0' 
doesn't support the option 'unknown_opt'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on: could not 
open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 'virtio0' 
doesn't support the option 'unknown_opt'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234: could 
not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 
'virtio0' doesn't support the option 'unknown_opt'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo: could 
not open disk image TEST_DIR/t.qcow2: Block format 'qcow2' used by device 
'virtio0' doesn't support the option 'unknown_opt'
+
+
+=== Unknown protocol option ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=: could 
not open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't support the 
option 'unknown_opt'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on: 
could not open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't 
support the option 'unknown_opt'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234: 
could not open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't 
support the option 'unknown_opt'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo: 
could not open disk image TEST_DIR/t.qcow2: Block protocol 'file' doesn't 
support the option 'unknown_opt'
+
+
+=== Invalid format ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=foo
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=foo: 'foo' invalid format
+
+Testing: -drive file=TEST_DIR/t.qcow2,driver=foo
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: could not open disk image 
TEST_DIR/t.qcow2: Unknown driver 'foo'
+
+Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: could not 
open disk image TEST_DIR/t.qcow2: Driver specified twice
+
+
+=== Overriding backing file ===
+
+Testing: -drive 
file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig 
-nodefaults
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) iininfinfoinfo 
info binfo 
blinfo bloinfo 
blocinfo block
+virtio0: TEST_DIR/t.qcow2 (qcow2)
+    Backing file:     TEST_DIR/t.qcow2.orig (chain depth: 1)
+(qemu) qququiquit
+
+Testing: -drive 
file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig
+QEMU_PROG: -drive 
file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig: 
could not open disk image TEST_DIR/t.qcow2: Driver doesn't support backing files
+
+Testing: -drive 
file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig
+QEMU_PROG: -drive 
file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig:
 could not open disk image TEST_DIR/t.qcow2: Driver doesn't support backing 
files
+
+Testing: -drive 
file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig
+QEMU_PROG: -drive 
file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig:
 could not open disk image TEST_DIR/t.qcow2: Driver doesn't support backing 
files
+
+
+=== Enable and disable lazy refcounting on the command line, plus some invalid 
values ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: could 
not open disk image TEST_DIR/t.qcow2: Parameter 'lazy-refcounts' expects 'on' 
or 'off'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42: could 
not open disk image TEST_DIR/t.qcow2: Parameter 'lazy-refcounts' expects 'on' 
or 'off'
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo: could 
not open disk image TEST_DIR/t.qcow2: Parameter 'lazy-refcounts' expects 'on' 
or 'off'
+
+
+=== With version 2 images enabling lazy refcounts must fail ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: could 
not open disk image TEST_DIR/t.qcow2: Lazy refcounts require a qcow2 image with 
at least qemu 1.1 compatibility level
+
+Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+
+=== No medium ===
+
+Testing: -drive if=floppy
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=floppy0,file=,if=floppy,bus=0,unit=0
+qququiquit
+
+Testing: -drive if=ide,media=cdrom
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=ide0-cd0,file=,if=ide,bus=0,unit=0
+qququiquit
+
+Testing: -drive if=scsi,media=cdrom
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=scsi0-cd0,file=,if=scsi,bus=0,unit=0
+qququiquit
+
+Testing: -drive if=ide
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=ide0-hd0,file=,if=ide,bus=0,unit=0
+qququiquit
+
+Testing: -drive if=virtio
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
+QEMU_PROG: -drive if=virtio: Device initialization failed.
+QEMU_PROG: -drive if=virtio: Device 'virtio-blk-s390' could not be initialized
+
+Testing: -drive if=scsi
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=scsi0-hd0,file=,if=scsi,bus=0,unit=0
+qququiquit
+
+
+=== Read-only ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=floppy,readonly=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=floppy0,file=TEST_DIR/t.qcow2,if=floppy,bus=0,unit=0
+qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=ide,media=cdrom,readonly=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=ide0-cd0,file=TEST_DIR/t.qcow2,if=ide,bus=0,unit=0
+qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,media=cdrom,readonly=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=scsi0-cd0,file=TEST_DIR/t.qcow2,if=scsi,bus=0,unit=0
+qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=ide0-hd0,file=TEST_DIR/t.qcow2,if=ide,bus=0,unit=0
+qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,readonly=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=scsi0-hd0,file=TEST_DIR/t.qcow2,if=scsi,bus=0,unit=0
+qququiquit
+
+
+=== Cache modes ===
+
+Testing: -drive if=scsi,media=cdrom,cache=none
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=scsi0-cd0,file=,if=scsi,bus=0,unit=0
+qququiquit
+
+Testing: -drive if=scsi,media=cdrom,cache=directsync
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=scsi0-cd0,file=,if=scsi,bus=0,unit=0
+qququiquit
+
+Testing: -drive if=scsi,media=cdrom,cache=writeback
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=scsi0-cd0,file=,if=scsi,bus=0,unit=0
+qququiquit
+
+Testing: -drive if=scsi,media=cdrom,cache=writethrough
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=scsi0-cd0,file=,if=scsi,bus=0,unit=0
+qququiquit
+
+Testing: -drive if=scsi,media=cdrom,cache=unsafe
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) Warning: Orphaned drive without device: 
id=scsi0-cd0,file=,if=scsi,bus=0,unit=0
+qququiquit
+
+Testing: -drive if=scsi,media=cdrom,cache=invalid_value
+QEMU_PROG: -drive if=scsi,media=cdrom,cache=invalid_value: invalid cache option
+
+
+=== Specifying the protocol layer ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2: could not open disk 
image TEST_DIR/t.qcow2: Block format 'qcow2' used by device '' doesn't support 
the option 'filename'
+
+
+=== Leaving out required options ===
+
+Testing: -drive driver=file
+QEMU_PROG: -drive driver=file: could not open disk image virtio0: The 'file' 
block driver requires a file name
+
+Testing: -drive driver=nbd
+QEMU_PROG: -drive driver=nbd: could not open disk image virtio0: one of path 
and host must be specified.
+
+Testing: -drive driver=raw
+QEMU_PROG: -drive driver=raw: could not open disk image virtio0: Can't use 
'raw' as a block driver for the protocol level
+
+Testing: -drive file.driver=file
+QEMU_PROG: -drive file.driver=file: could not open disk image virtio0: The 
'file' block driver requires a file name
+
+Testing: -drive file.driver=nbd
+QEMU_PROG: -drive file.driver=nbd: could not open disk image virtio0: one of 
path and host must be specified.
+
+Testing: -drive file.driver=raw
+QEMU_PROG: -drive file.driver=raw: could not open disk image virtio0: Can't 
use 'raw' as a block driver for the protocol level
+
+Testing: -drive foo=bar
+QEMU_PROG: -drive foo=bar: could not open disk image virtio0: Must specify 
either driver or file
+
+
+=== Specifying both an option and its legacy alias ===
+
+Testing: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678: 
'throttling.iops-total' and its alias 'iops' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678
+QEMU_PROG: -drive 
file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678: 
'throttling.iops-read' and its alias 'iops_rd' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678
+QEMU_PROG: -drive 
file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678: 
'throttling.iops-write' and its alias 'iops_wr' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678: 
'throttling.bps-total' and its alias 'bps' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678: 
'throttling.bps-read' and its alias 'bps_rd' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678: 
'throttling.bps-write' and its alias 'bps_wr' can't be used at the same time
+
+Testing: -drive 
file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678
+QEMU_PROG: -drive 
file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678: 
'throttling.iops-total-max' and its alias 'iops_max' can't be used at the same 
time
+
+Testing: -drive 
file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678
+QEMU_PROG: -drive 
file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678: 
'throttling.iops-read-max' and its alias 'iops_rd_max' can't be used at the 
same time
+
+Testing: -drive 
file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678
+QEMU_PROG: -drive 
file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678: 
'throttling.iops-write-max' and its alias 'iops_wr_max' can't be used at the 
same time
+
+Testing: -drive 
file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678
+QEMU_PROG: -drive 
file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678: 
'throttling.bps-total-max' and its alias 'bps_max' can't be used at the same 
time
+
+Testing: -drive 
file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678
+QEMU_PROG: -drive 
file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678: 
'throttling.bps-read-max' and its alias 'bps_rd_max' can't be used at the same 
time
+
+Testing: -drive 
file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678
+QEMU_PROG: -drive 
file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678: 
'throttling.bps-write-max' and its alias 'bps_wr_max' can't be used at the same 
time
+
+Testing: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678
+QEMU_PROG: -drive 
file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678: 
'throttling.iops-size' and its alias 'iops_size' can't be used at the same time
+
+Testing: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off
+QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only' 
and its alias 'readonly' can't be used at the same time
+
+
+=== Parsing protocol from file name ===
+
+Testing: -hda foo:bar
+QEMU_PROG: -hda foo:bar: could not open disk image foo:bar: Unknown protocol
+
+Testing: -drive file=foo:bar
+QEMU_PROG: -drive file=foo:bar: could not open disk image foo:bar: Unknown 
protocol
+
+Testing: -drive file.filename=foo:bar
+QEMU_PROG: -drive file.filename=foo:bar: could not open disk image virtio0: 
Could not open 'foo:bar': No such file or directory
+
+Testing: -hda file:TEST_DIR/t.qcow2
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=file:TEST_DIR/t.qcow2
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file.filename=file:TEST_DIR/t.qcow2
+QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: could not open disk 
image virtio0: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
+
+
+=== Snapshot mode ===
+
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Testing: -drive file=TEST_DIR/t.qcow2 -snapshot
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) 
qqeqemqemuqemu-qemu-iqemu-ioqemu-io
 qemu-io vqemu-io 
viqemu-io 
virqemu-io 
virtqemu-io 
virtiqemu-io 
virtioqemu-io 
virtio0qemu-io virtio0 
qemu-io virtio0 
"qemu-io virtio0 
"wqemu-io virtio0 
"wrqemu-io virtio0 
"wriqemu-io 
virtio0 "writ!
 qemu-io virtio0 
"writeqemu-io
 virtio0 "write 
qemu-io 
virtio0 "write 
-qemu-io
 virtio0 "write 
-Pqemu-io
 virtio0 "write -P 
qemu-io
 virtio0 "write -P 
0qemu-io
 virtio0 "write -P 
0xqemu-io
 virtio0 "write -P 
0x2qemu-io
 virtio0 "write -P 
0x22qemu-io
 virtio0 "wr!
 ite -P 0x22 
qemu-io
 virtio0 "write -P 0x22 
0qemu-io
 virtio0 "write -P 0x22 0 
qemu-io
 virtio0 "write -P 0x22 0 
4qemu-io
 virtio0 "write -P 0x22 0 
4kqemu-io
 virtio0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) 
qqeqemqemuqemu-qemu-iqemu-ioqemu-io
 qemu-io vqemu-io 
viqemu-io 
virqemu-io 
virtqemu-io 
virtiqemu-io 
virtioqemu-io 
virtio0qemu-io virtio0 
qemu-io virtio0 
"qemu-io virtio0 
"wqemu-io virtio0 
"wrqemu-io virtio0 
"wriqemu-io 
virtio0 "writ!
 qemu-io virtio0 
"writeqemu-io
 virtio0 "write 
qemu-io 
virtio0 "write 
-qemu-io
 virtio0 "write 
-Pqemu-io
 virtio0 "write -P 
qemu-io
 virtio0 "write -P 
0qemu-io
 virtio0 "write -P 
0xqemu-io
 virtio0 "write -P 
0x2qemu-io
 virtio0 "write -P 
0x22qemu-io
 virtio0 "wr!
 ite -P 0x22 
qemu-io
 virtio0 "write -P 0x22 
0qemu-io
 virtio0 "write -P 0x22 0 
qemu-io
 virtio0 "write -P 0x22 0 
4qemu-io
 virtio0 "write -P 0x22 0 
4kqemu-io
 virtio0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,snapshot=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) 
qqeqemqemuqemu-qemu-iqemu-ioqemu-io
 qemu-io vqemu-io 
viqemu-io 
virqemu-io 
virtqemu-io 
virtiqemu-io 
virtioqemu-io 
virtio0qemu-io virtio0 
qemu-io virtio0 
"qemu-io virtio0 
"wqemu-io virtio0 
"wrqemu-io virtio0 
"wriqemu-io 
virtio0 "writ!
 qemu-io virtio0 
"writeqemu-io
 virtio0 "write 
qemu-io 
virtio0 "write 
-qemu-io
 virtio0 "write 
-Pqemu-io
 virtio0 "write -P 
qemu-io
 virtio0 "write -P 
0qemu-io
 virtio0 "write -P 
0xqemu-io
 virtio0 "write -P 
0x2qemu-io
 virtio0 "write -P 
0x22qemu-io
 virtio0 "wr!
 ite -P 0x22 
qemu-io
 virtio0 "write -P 0x22 
0qemu-io
 virtio0 "write -P 0x22 0 
qemu-io
 virtio0 "write -P 0x22 0 
4qemu-io
 virtio0 "write -P 0x22 0 
4kqemu-io
 virtio0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2 -snapshot
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) 
qqeqemqemuqemu-qemu-iqemu-ioqemu-io
 qemu-io vqemu-io 
viqemu-io 
virqemu-io 
virtqemu-io 
virtiqemu-io 
virtioqemu-io 
virtio0qemu-io virtio0 
qemu-io virtio0 
"qemu-io virtio0 
"wqemu-io virtio0 
"wrqemu-io virtio0 
"wriqemu-io 
virtio0 "writ!
 qemu-io virtio0 
"writeqemu-io
 virtio0 "write 
qemu-io 
virtio0 "write 
-qemu-io
 virtio0 "write 
-Pqemu-io
 virtio0 "write -P 
qemu-io
 virtio0 "write -P 
0qemu-io
 virtio0 "write -P 
0xqemu-io
 virtio0 "write -P 
0x2qemu-io
 virtio0 "write -P 
0x22qemu-io
 virtio0 "wr!
 ite -P 0x22 
qemu-io
 virtio0 "write -P 0x22 
0qemu-io
 virtio0 "write -P 0x22 0 
qemu-io
 virtio0 "write -P 0x22 0 
4qemu-io
 virtio0 "write -P 0x22 0 
4kqemu-io
 virtio0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=file:TEST_DIR/t.qcow2 -snapshot
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) 
qqeqemqemuqemu-qemu-iqemu-ioqemu-io
 qemu-io vqemu-io 
viqemu-io 
virqemu-io 
virtqemu-io 
virtiqemu-io 
virtioqemu-io 
virtio0qemu-io virtio0 
qemu-io virtio0 
"qemu-io virtio0 
"wqemu-io virtio0 
"wrqemu-io virtio0 
"wriqemu-io 
virtio0 "writ!
 qemu-io virtio0 
"writeqemu-io
 virtio0 "write 
qemu-io 
virtio0 "write 
-qemu-io
 virtio0 "write 
-Pqemu-io
 virtio0 "write -P 
qemu-io
 virtio0 "write -P 
0qemu-io
 virtio0 "write -P 
0xqemu-io
 virtio0 "write -P 
0x2qemu-io
 virtio0 "write -P 
0x22qemu-io
 virtio0 "wr!
 ite -P 0x22 
qemu-io
 virtio0 "write -P 0x22 
0qemu-io
 virtio0 "write -P 0x22 0 
qemu-io
 virtio0 "write -P 0x22 0 
4qemu-io
 virtio0 "write -P 0x22 0 
4kqemu-io
 virtio0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) 
qqeqemqemuqemu-qemu-iqemu-ioqemu-io
 qemu-io vqemu-io 
viqemu-io 
virqemu-io 
virtqemu-io 
virtiqemu-io 
virtioqemu-io 
virtio0qemu-io virtio0 
qemu-io virtio0 
"qemu-io virtio0 
"wqemu-io virtio0 
"wrqemu-io virtio0 
"wriqemu-io 
virtio0 "writ!
 qemu-io virtio0 
"writeqemu-io
 virtio0 "write 
qemu-io 
virtio0 "write 
-qemu-io
 virtio0 "write 
-Pqemu-io
 virtio0 "write -P 
qemu-io
 virtio0 "write -P 
0qemu-io
 virtio0 "write -P 
0xqemu-io
 virtio0 "write -P 
0x2qemu-io
 virtio0 "write -P 
0x22qemu-io
 virtio0 "wr!
 ite -P 0x22 
qemu-io
 virtio0 "write -P 0x22 
0qemu-io
 virtio0 "write -P 0x22 0 
qemu-io
 virtio0 "write -P 0x22 0 
4qemu-io
 virtio0 "write -P 0x22 0 
4kqemu-io
 virtio0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2 -snapshot
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) 
qqeqemqemuqemu-qemu-iqemu-ioqemu-io
 qemu-io vqemu-io 
viqemu-io 
virqemu-io 
virtqemu-io 
virtiqemu-io 
virtioqemu-io 
virtio0qemu-io virtio0 
qemu-io virtio0 
"qemu-io virtio0 
"wqemu-io virtio0 
"wrqemu-io virtio0 
"wriqemu-io 
virtio0 "writ!
 qemu-io virtio0 
"writeqemu-io
 virtio0 "write 
qemu-io 
virtio0 "write 
-qemu-io
 virtio0 "write 
-Pqemu-io
 virtio0 "write -P 
qemu-io
 virtio0 "write -P 
0qemu-io
 virtio0 "write -P 
0xqemu-io
 virtio0 "write -P 
0x2qemu-io
 virtio0 "write -P 
0x22qemu-io
 virtio0 "wr!
 ite -P 0x22 
qemu-io
 virtio0 "write -P 0x22 
0qemu-io
 virtio0 "write -P 0x22 0 
qemu-io
 virtio0 "write -P 0x22 0 
4qemu-io
 virtio0 "write -P 0x22 0 
4kqemu-io
 virtio0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) 
qqeqemqemuqemu-qemu-iqemu-ioqemu-io
 qemu-io vqemu-io 
viqemu-io 
virqemu-io 
virtqemu-io 
virtiqemu-io 
virtioqemu-io 
virtio0qemu-io virtio0 
qemu-io virtio0 
"qemu-io virtio0 
"wqemu-io virtio0 
"wrqemu-io virtio0 
"wriqemu-io 
virtio0 "writ!
 qemu-io virtio0 
"writeqemu-io
 virtio0 "write 
qemu-io 
virtio0 "write 
-qemu-io
 virtio0 "write 
-Pqemu-io
 virtio0 "write -P 
qemu-io
 virtio0 "write -P 
0qemu-io
 virtio0 "write -P 
0xqemu-io
 virtio0 "write -P 
0x2qemu-io
 virtio0 "write -P 
0x22qemu-io
 virtio0 "wr!
 ite -P 0x22 
qemu-io
 virtio0 "write -P 0x22 
0qemu-io
 virtio0 "write -P 0x22 0 
qemu-io
 virtio0 "write -P 0x22 0 
4qemu-io
 virtio0 "write -P 0x22 0 
4kqemu-io
 virtio0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+read 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) 
qqeqemqemuqemu-qemu-iqemu-ioqemu-io
 qemu-io vqemu-io 
viqemu-io 
virqemu-io 
virtqemu-io 
virtiqemu-io 
virtioqemu-io 
virtio0qemu-io virtio0 
qemu-io virtio0 
"qemu-io virtio0 
"wqemu-io virtio0 
"wrqemu-io virtio0 
"wriqemu-io 
virtio0 "writ!
 qemu-io virtio0 
"writeqemu-io
 virtio0 "write 
qemu-io 
virtio0 "write 
-qemu-io
 virtio0 "write 
-Pqemu-io
 virtio0 "write -P 
qemu-io
 virtio0 "write -P 
0qemu-io
 virtio0 "write -P 
0xqemu-io
 virtio0 "write -P 
0x2qemu-io
 virtio0 "write -P 
0x22qemu-io
 virtio0 "wr!
 ite -P 0x22 
qemu-io
 virtio0 "write -P 0x22 
0qemu-io
 virtio0 "write -P 0x22 0 
qemu-io
 virtio0 "write -P 0x22 0 
4qemu-io
 virtio0 "write -P 0x22 0 
4kqemu-io
 virtio0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+read 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) 
qqeqemqemuqemu-qemu-iqemu-ioqemu-io
 qemu-io vqemu-io 
viqemu-io 
virqemu-io 
virtqemu-io 
virtiqemu-io 
virtioqemu-io 
virtio0qemu-io virtio0 
qemu-io virtio0 
"qemu-io virtio0 
"wqemu-io virtio0 
"wrqemu-io virtio0 
"wriqemu-io 
virtio0 "writ!
 qemu-io virtio0 
"writeqemu-io
 virtio0 "write 
qemu-io 
virtio0 "write 
-qemu-io
 virtio0 "write 
-Pqemu-io
 virtio0 "write -P 
qemu-io
 virtio0 "write -P 
0qemu-io
 virtio0 "write -P 
0xqemu-io
 virtio0 "write -P 
0x3qemu-io
 virtio0 "write -P 
0x33qemu-io
 virtio0 "wr!
 ite -P 0x33 
qemu-io
 virtio0 "write -P 0x33 
0qemu-io
 virtio0 "write -P 0x33 0 
qemu-io
 virtio0 "write -P 0x33 0 
4qemu-io
 virtio0 "write -P 0x33 0 
4kqemu-io
 virtio0 "write -P 0x33 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) 
ccocomcommcommicommitcommit
 commit vcommit 
vicommit 
vircommit 
virtcommit 
virticommit 
virtiocommit virtio0
+(qemu) qququiquit
+
+read 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+*** done
-- 
1.9.3