> -----Original Message-----
> From: qemu-devel-bounces+arei.gonglei=huawei....@nongnu.org
> [mailto:qemu-devel-bounces+arei.gonglei=huawei....@nongnu.org] On
> Behalf Of Sanidhya Kashyap
> Sent: Saturday, August 09, 2014 2:27 PM
> To: qemu list
> Cc: Sanidhya Kashyap; Joel Schopp; Stefan Berger; Dr. David Alan Gilbert; Juan
> Quintela
> Subject: [Qemu-devel] [RFC PATCH v3 1/6] QEMUSizedBuffer/QEMUFile
>
> From: "Dr. David Alan Gilbert" <dgilb...@redhat.com>
>
> Stefan Berger's to create a QEMUFile that goes to a memory buffer;
> from:
>
> http://lists.gnu.org/archive/html/qemu-devel/2013-03/msg05036.html
>
> Using the QEMUFile interface, this patch adds support functions for
> operating
> on in-memory sized buffers that can be written to or read from.
>
> Signed-off-by: Stefan Berger <stef...@linux.vnet.ibm.com>
> Signed-off-by: Joel Schopp <jsch...@linux.vnet.ibm.com>
> Signed-off-by: Sanidhya Kashyap <sanidhya.ii...@gmail.com>
> ---
> include/migration/qemu-file.h | 27 +++
> qemu-file.c | 411
> ++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 438 insertions(+)
>
> diff --git a/include/migration/qemu-file.h b/include/migration/qemu-file.h
> index c90f529..14e1f4d 100644
> --- a/include/migration/qemu-file.h
> +++ b/include/migration/qemu-file.h
> @@ -25,6 +25,8 @@
> #define QEMU_FILE_H 1
> #include "exec/cpu-common.h"
>
> +#include <stdint.h>
> +
> /* This function writes a chunk of data to a file at the given position.
> * The pos argument can be ignored if the file is only being used for
> * streaming. The handler should try to write all of the data it can.
> @@ -94,11 +96,31 @@ typedef struct QEMUFileOps {
> QEMURamSaveFunc *save_page;
> } QEMUFileOps;
>
> +struct QEMUSizedBuffer {
> + struct iovec *iov;
> + size_t n_iov;
> + size_t size; /* total allocated size in all iov's */
> + size_t used; /* number of used bytes */
> +};
> +
> +typedef struct QEMUSizedBuffer QEMUSizedBuffer;
> +QEMUSizedBuffer *qsb_create(const uint8_t *buffer, size_t len);
> +QEMUSizedBuffer *qsb_clone(const QEMUSizedBuffer *);
> +void qsb_free(QEMUSizedBuffer *);
> +size_t qsb_set_length(QEMUSizedBuffer *qsb, size_t length);
> +size_t qsb_get_length(const QEMUSizedBuffer *qsb);
> +ssize_t qsb_get_buffer(const QEMUSizedBuffer *, off_t start, size_t count,
> + uint8_t **buf);
> +ssize_t qsb_write_at(QEMUSizedBuffer *qsb, const uint8_t *buf,
> + off_t pos, size_t count);
> +
> +
> QEMUFile *qemu_fopen_ops(void *opaque, const QEMUFileOps *ops);
> QEMUFile *qemu_fopen(const char *filename, const char *mode);
> QEMUFile *qemu_fdopen(int fd, const char *mode);
> QEMUFile *qemu_fopen_socket(int fd, const char *mode);
> QEMUFile *qemu_popen_cmd(const char *command, const char *mode);
> +QEMUFile *qemu_bufopen(const char *mode, QEMUSizedBuffer *input);
> int qemu_get_fd(QEMUFile *f);
> int qemu_fclose(QEMUFile *f);
> int64_t qemu_ftell(QEMUFile *f);
> @@ -111,6 +133,11 @@ void qemu_put_byte(QEMUFile *f, int v);
> void qemu_put_buffer_async(QEMUFile *f, const uint8_t *buf, int size);
> bool qemu_file_mode_is_not_valid(const char *mode);
>
> +/*
> + * For use on files opened with qemu_bufopen
> + */
> +const QEMUSizedBuffer *qemu_buf_get(QEMUFile *f);
> +
> static inline void qemu_put_ubyte(QEMUFile *f, unsigned int v)
> {
> qemu_put_byte(f, (int)v);
> diff --git a/qemu-file.c b/qemu-file.c
> index a8e3912..9fd1675 100644
> --- a/qemu-file.c
> +++ b/qemu-file.c
> @@ -878,3 +878,414 @@ uint64_t qemu_get_be64(QEMUFile *f)
> v |= qemu_get_be32(f);
> return v;
> }
> +
> +
> +#define QSB_CHUNK_SIZE (1 << 10)
> +#define QSB_MAX_CHUNK_SIZE (10 * QSB_CHUNK_SIZE)
> +
> +/**
> + * Create a QEMUSizedBuffer
> + * This type of buffer uses scatter-gather lists internally and
> + * can grow to any size. Any data array in the scatter-gather list
> + * can hold different amount of bytes.
> + *
> + * @buffer: Optional buffer to copy into the QSB
> + * @len: size of initial buffer; if @buffer is given, buffer must
> + * hold at least len bytes
> + *
> + * Returns a pointer to a QEMUSizedBuffer
> + */
> +QEMUSizedBuffer *qsb_create(const uint8_t *buffer, size_t len)
> +{
> + QEMUSizedBuffer *qsb;
> + size_t alloc_len, num_chunks, i, to_copy;
> + size_t chunk_size = (len > QSB_MAX_CHUNK_SIZE)
> + ? QSB_MAX_CHUNK_SIZE
> + : QSB_CHUNK_SIZE;
> +
> + if (len == 0) {
> + /* we want to allocate at least one chunk */
> + len = QSB_CHUNK_SIZE;
> + }
> +
> + num_chunks = DIV_ROUND_UP(len, chunk_size);
> + alloc_len = num_chunks * chunk_size;
> +
> + qsb = g_new0(QEMUSizedBuffer, 1);
> + qsb->iov = g_new0(struct iovec, num_chunks);
> + qsb->n_iov = num_chunks;
> +
> + for (i = 0; i < num_chunks; i++) {
> + qsb->iov[i].iov_base = g_malloc0(chunk_size);
> + qsb->iov[i].iov_len = chunk_size;
> + if (buffer) {
> + to_copy = (len - qsb->used) > chunk_size
> + ? chunk_size : (len - qsb->used);
> + memcpy(qsb->iov[i].iov_base, &buffer[qsb->used], to_copy);
> + qsb->used += to_copy;
> + }
> + }
> +
> + qsb->size = alloc_len;
> +
> + return qsb;
> +}
> +
> +/**
> + * Free the QEMUSizedBuffer
> + *
> + * @qsb: The QEMUSizedBuffer to free
> + */
> +void qsb_free(QEMUSizedBuffer *qsb)
> +{
> + size_t i;
> +
> + if (!qsb) {
> + return;
> + }
> +
> + for (i = 0; i < qsb->n_iov; i++) {
> + g_free(qsb->iov[i].iov_base);
> + }
> + g_free(qsb->iov);
> + g_free(qsb);
> +}
> +
> +/**
> + * Get the number of of used bytes in the QEMUSizedBuffer
> + *
> + * @qsb: A QEMUSizedBuffer
> + *
> + * Returns the number of bytes currently used in this buffer
> + */
> +size_t qsb_get_length(const QEMUSizedBuffer *qsb)
> +{
> + return qsb->used;
> +}
> +
> +/**
> + * Set the length of the buffer; The primary usage of this
> + * function is to truncate the number of used bytes in the buffer.
> + * The size will not be extended beyond the current number of
> + * allocated bytes in the QEMUSizedBuffer.
> + *
> + * @qsb: A QEMUSizedBuffer
> + * @new_len : The new length of bytes in the buffer
> + *
> + * Returns the number of bytes the buffer was trucated or extended
> + * to.
> + */
> +size_t qsb_set_length(QEMUSizedBuffer *qsb, size_t new_len)
> +{
> + if (new_len <= qsb->size) {
> + qsb->used = new_len;
> + } else {
> + qsb->used = qsb->size;
> + }
> + return qsb->used;
> +}
> +
> +/**
> + * Get the iovec that holds the data for a given position @pos.
> + *
> + * @qsb: A QEMUSizedBuffer
> + * @pos: The index of a byte in the buffer
> + * @d_off: Pointer to an offset that this function will indicate
> + * at what position within the returned iovec the byte
> + * is to be found
> + *
> + * Returns the index of the iovec that holds the byte at the given
> + * index @pos in the byte stream; a negative number if the iovec
> + * for the given position @pos does not exist.
> + */
> +static ssize_t qsb_get_iovec(const QEMUSizedBuffer *qsb,
> + off_t pos, off_t *d_off)
> +{
> + ssize_t i;
> + off_t curr = 0;
> +
> + if (pos > qsb->used) {
> + return -1;
> + }
> +
> + for (i = 0; i < qsb->n_iov; i++) {
> + if (curr + qsb->iov[i].iov_len > pos) {
> + *d_off = pos - curr;
> + return i;
> + }
> + curr += qsb->iov[i].iov_len;
> + }
> + return -1;
> +}
> +
> +/*
> + * Convert the QEMUSizedBuffer into a flat buffer.
> + *
> + * Note: If at all possible, try to avoid this function since it
> + * may unnecessarily copy memory around.
> + *
> + * @qsb: pointer to QEMUSizedBuffer
> + * @start : offset to start at
> + * @count: number of bytes to copy
> + * @buf: a pointer to an optional buffer to write into; the pointer may
> + * point to NULL in which case the buffer will be allocated;
> + * if buffer is provided, it must be large enough to hold @count bytes
> + *
> + * Returns the number of bytes copied into the output buffer
> + */
> +ssize_t qsb_get_buffer(const QEMUSizedBuffer *qsb, off_t start,
> + size_t count, uint8_t **buf)
> +{
> + uint8_t *buffer;
> + const struct iovec *iov;
> + size_t to_copy, all_copy;
> + ssize_t index;
> + off_t s_off;
> + off_t d_off = 0;
> + char *s;
> +
> + if (start > qsb->used) {
> + return 0;
> + }
> +
> + all_copy = qsb->used - start;
> + if (all_copy > count) {
> + all_copy = count;
> + } else {
> + count = all_copy;
> + }
> +
> + if (*buf == NULL) {
> + *buf = g_malloc(all_copy);
> + }
> + buffer = *buf;
> +
> + index = qsb_get_iovec(qsb, start, &s_off);
> + if (index < 0) {
> + return 0;
> + }
> +
> + while (all_copy > 0) {
> + iov = &qsb->iov[index];
> +
> + s = iov->iov_base;
> +
> + to_copy = iov->iov_len - s_off;
> + if (to_copy > all_copy) {
> + to_copy = all_copy;
> + }
> + memcpy(&buffer[d_off], &s[s_off], to_copy);
> +
> + d_off += to_copy;
> + all_copy -= to_copy;
> +
> + s_off = 0;
> + index++;
> + }
> +
> + return count;
> +}
> +
> +/**
> + * Grow the QEMUSizedBuffer to the given size and allocated
> + * memory for it.
> + *
> + * @qsb: A QEMUSizedBuffer
> + * @new_size: The new size of the buffer
> + *
> + * Returns an error code in case of memory allocation failure
> + * or the new size of the buffer otherwise. The returned size
> + * may be greater or equal to @new_size.
> + */
> +static ssize_t qsb_grow(QEMUSizedBuffer *qsb, size_t new_size)
> +{
> + size_t needed_chunks, i;
> + size_t chunk_size = QSB_CHUNK_SIZE;
> +
> + if (qsb->size < new_size) {
> + needed_chunks = DIV_ROUND_UP(new_size - qsb->size,
> + chunk_size);
> +
> + qsb->iov = g_realloc_n(qsb->iov, qsb->n_iov + needed_chunks,
> + sizeof(struct iovec));
> + if (qsb->iov == NULL) {
> + return -ENOMEM;
> + }
OK...
> +
> + for (i = qsb->n_iov; i < qsb->n_iov + needed_chunks; i++) {
> + qsb->iov[i].iov_base = g_malloc0(chunk_size);
> + qsb->iov[i].iov_len = chunk_size;
> + }
> +
> + qsb->n_iov += needed_chunks;
> + qsb->size += (needed_chunks * chunk_size);
> + }
> +
> + return qsb->size;
> +}
> +
> +/**
> + * Write into the QEMUSizedBuffer at a given position and a given
> + * number of bytes. This function will automatically grow the
> + * QEMUSizedBuffer.
> + *
> + * @qsb: A QEMUSizedBuffer
> + * @source: A byte array to copy data from
> + * @pos: The position withing the @qsb to write data to
> + * @size: The number of bytes to copy into the @qsb
> + *
> + * Returns an error code in case of memory allocation failure,
> + * @size otherwise.
> + */
> +ssize_t qsb_write_at(QEMUSizedBuffer *qsb, const uint8_t *source,
> + off_t pos, size_t count)
> +{
> + ssize_t rc = qsb_grow(qsb, pos + count);
> + size_t to_copy;
> + size_t all_copy = count;
> + const struct iovec *iov;
> + ssize_t index;
> + char *dest;
> + off_t d_off, s_off = 0;
> +
> + if (rc < 0) {
> + return rc;
> + }
> +
OK...
> + if (pos + count > qsb->used) {
> + qsb->used = pos + count;
> + }
> +
> + index = qsb_get_iovec(qsb, pos, &d_off);
> + if (index < 0) {
> + return 0;
> + }
> +
> + while (all_copy > 0) {
> + iov = &qsb->iov[index];
> +
> + dest = iov->iov_base;
> +
> + to_copy = iov->iov_len - d_off;
> + if (to_copy > all_copy) {
> + to_copy = all_copy;
> + }
> +
> + memcpy(&dest[d_off], &source[s_off], to_copy);
> +
> + s_off += to_copy;
> + all_copy -= to_copy;
> +
> + d_off = 0;
> + index++;
> + }
> +
> + return count;
> +}
> +
> +/**
> + * Create an exact copy of the given QEMUSizedBuffer.
> + *
> + * @qsb : A QEMUSizedBuffer
> + *
> + * Returns a clone of @qsb
> + */
> +QEMUSizedBuffer *qsb_clone(const QEMUSizedBuffer *qsb)
> +{
> + QEMUSizedBuffer *out = qsb_create(NULL, qsb_get_length(qsb));
> + size_t i;
> + off_t pos = 0;
> +
> + for (i = 0; i < qsb->n_iov; i++) {
> + pos += qsb_write_at(out, qsb->iov[i].iov_base,
> + pos, qsb->iov[i].iov_len);
If qsb_write_at() return -ENOMEM, just simply add it to pos ?
Best regards,
-Gonglei
