On Wed, 23 Jul 2014 18:37:45 +0200
Paolo Bonzini <pbonz...@redhat.com> wrote:
> This replaces the _PRT constant with a method that computes it.
>
> The problem is that the DSDT+SSDT have grown from 2.0 to 2.1,
> enough to cross the 8k barrier (we align the ACPI tables to 4k
> before putting them in fw_cfg). This causes problems with
> migration and the pc-2.0 machine type.
>
> The solution to the problem is to hardcode 64k as the limit,
> but this doesn't solve the bug with pc-2.0. The fix will be
> for QEMU 2.1 to use exactly the same size as QEMU 2.0 for the
> ACPI tables. First, however, we must make the actual AML size
> equal or smaller; to do this, rewrite _PRT in a way that saves
> over 1k of bytecode.
>
> Tested on Windows XP. Q35 already uses a method for _PRT
> so most guests should be okay.
> Signed-off-by: Paolo Bonzini <pbonz...@redhat.com>
> ---
> hw/i386/acpi-dsdt.dsl | 90
> ++++++++++++++++++++++-----------------------------
After changing this file, it's precompiled counterpart also need to be updated
hw/i386/acpi-dsdt.hex.generated
> 1 file changed, 39 insertions(+), 51 deletions(-)
>
> diff --git a/hw/i386/acpi-dsdt.dsl b/hw/i386/acpi-dsdt.dsl
> index 3cc0ea0..6ba0170 100644
> --- a/hw/i386/acpi-dsdt.dsl
> +++ b/hw/i386/acpi-dsdt.dsl
> @@ -181,57 +181,45 @@ DefinitionBlock (
>
> Scope(\_SB) {
> Scope(PCI0) {
> - Name(_PRT, Package() {
> - /* PCI IRQ routing table, example from ACPI 2.0a
> specification,
> - section 6.2.8.1 */
> - /* Note: we provide the same info as the PCI routing
> - table of the Bochs BIOS */
> -
> -#define prt_slot(nr, lnk0, lnk1, lnk2, lnk3) \
> - Package() { nr##ffff, 0, lnk0, 0 }, \
> - Package() { nr##ffff, 1, lnk1, 0 }, \
> - Package() { nr##ffff, 2, lnk2, 0 }, \
> - Package() { nr##ffff, 3, lnk3, 0 }
> -
> -#define prt_slot0(nr) prt_slot(nr, LNKD, LNKA, LNKB, LNKC)
> -#define prt_slot1(nr) prt_slot(nr, LNKA, LNKB, LNKC, LNKD)
> -#define prt_slot2(nr) prt_slot(nr, LNKB, LNKC, LNKD, LNKA)
> -#define prt_slot3(nr) prt_slot(nr, LNKC, LNKD, LNKA, LNKB)
> -
> - prt_slot0(0x0000),
> - /* Device 1 is power mgmt device, and can only use irq 9 */
> - prt_slot(0x0001, LNKS, LNKB, LNKC, LNKD),
> - prt_slot2(0x0002),
> - prt_slot3(0x0003),
> - prt_slot0(0x0004),
> - prt_slot1(0x0005),
> - prt_slot2(0x0006),
> - prt_slot3(0x0007),
> - prt_slot0(0x0008),
> - prt_slot1(0x0009),
> - prt_slot2(0x000a),
> - prt_slot3(0x000b),
> - prt_slot0(0x000c),
> - prt_slot1(0x000d),
> - prt_slot2(0x000e),
> - prt_slot3(0x000f),
> - prt_slot0(0x0010),
> - prt_slot1(0x0011),
> - prt_slot2(0x0012),
> - prt_slot3(0x0013),
> - prt_slot0(0x0014),
> - prt_slot1(0x0015),
> - prt_slot2(0x0016),
> - prt_slot3(0x0017),
> - prt_slot0(0x0018),
> - prt_slot1(0x0019),
> - prt_slot2(0x001a),
> - prt_slot3(0x001b),
> - prt_slot0(0x001c),
> - prt_slot1(0x001d),
> - prt_slot2(0x001e),
> - prt_slot3(0x001f),
> - })
> + Method (_PRT, 0) {
> + Store(Package(128) {}, Local0)
> + Store(Zero, Local1)
> + While(LLess(Local1, 128)) {
> + // slot = pin >> 2
> + Store(ShiftRight(Local1, 2), Local2)
> +
> + // lnk = (slot + pin) & 3
> + Store(And(Add(Local1, Local2), 3), Local3)
> + If (LEqual(Local3, 0)) {
> + Store(Package(4) { Zero, Zero, LNKD, Zero }, Local4)
> + }
> + If (LEqual(Local3, 1)) {
> + // device 1 is the power-management device, needs SCI
> + If (LEqual(Local1, 4)) {
> + Store(Package(4) { Zero, Zero, LNKS, Zero },
> Local4)
> + } Else {
> + Store(Package(4) { Zero, Zero, LNKA, Zero },
> Local4)
> + }
> + }
> + If (LEqual(Local3, 2)) {
> + Store(Package(4) { Zero, Zero, LNKB, Zero }, Local4)
> + }
> + If (LEqual(Local3, 3)) {
> + Store(Package(4) { Zero, Zero, LNKC, Zero }, Local4)
> + }
> +
> + // Complete the interrupt routing entry:
> + // Package(4) { 0x[slot]FFFF, [pin], [link], 0) }
> +
> + Store(Or(ShiftLeft(Local2, 16), 0xFFFF), Index(Local4,
> 0))
> + Store(And(Local1, 3), Index(Local4,
> 1))
> + Store(Local4, Index(Local0,
> Local1))
> +
> + Increment(Local1)
> + }
> +
> + Return(Local0)
> + }
> }
>
> Field(PCI0.ISA.P40C, ByteAcc, NoLock, Preserve) {
