On Fri, 30 May 2014 00:06:23 +1000
Peter Crosthwaite <peter.crosthwa...@xilinx.com> wrote:
> On Tue, May 27, 2014 at 11:01 PM, Igor Mammedov <imamm...@redhat.com> wrote:
> > Add following parameters:
> > "slots" - total number of hotplug memory slots
> > "maxmem" - maximum possible memory
> >
> > "slots" and "maxmem" should go in pair and "maxmem" should be greater
> > than "mem" for memory hotplug to be enabled.
> >
> > Signed-off-by: Igor Mammedov <imamm...@redhat.com>
> > ---
> > v4:
> > - store maxmem & slots values in MachineState
> > v3:
> > - store maxmem & slots values in QEMUMachineInitArgs
> > v2:
> > - rebased on top of the latest "vl: convert -m to QemuOpts"
> > ---
> > include/hw/boards.h | 3 ++-
> > qemu-options.hx | 9 ++++++---
> > vl.c | 51
> > +++++++++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 59 insertions(+), 4 deletions(-)
> >
> > diff --git a/include/hw/boards.h b/include/hw/boards.h
> > index b62de4a..f6fbbe1 100644
> > --- a/include/hw/boards.h
> > +++ b/include/hw/boards.h
> > @@ -8,7 +8,6 @@
> > #include "hw/qdev.h"
> > #include "qom/object.h"
> >
> > -
>
> A nit, but this is out of scope.
I'll fix it since due to s/Dimm/DIMM/ I'll have to respin series anyway.
>
> Regards,
> Peter
>
> > typedef struct MachineState MachineState;
> >
> > typedef void QEMUMachineInitFunc(MachineState *ms);
> > @@ -113,6 +112,8 @@ struct MachineState {
> > char *firmware;
> >
> > ram_addr_t ram_size;
> > + ram_addr_t maxram_size;
> > + uint64_t ram_slots;
> > const char *boot_order;
> > const char *kernel_filename;
> > const char *kernel_cmdline;
> > diff --git a/qemu-options.hx b/qemu-options.hx
> > index c2c0823..dc3d8d5 100644
> > --- a/qemu-options.hx
> > +++ b/qemu-options.hx
> > @@ -210,17 +210,20 @@ use is discouraged as it may be removed from future
> > versions.
> > ETEXI
> >
> > DEF("m", HAS_ARG, QEMU_OPTION_m,
> > - "-m [size=]megs\n"
> > + "-m[emory] [size=]megs[,slots=n,maxmem=size]\n"
> > " configure guest RAM\n"
> > " size: initial amount of guest memory (default: "
> > - stringify(DEFAULT_RAM_SIZE) "MiB)\n",
> > + stringify(DEFAULT_RAM_SIZE) "MiB)\n"
> > + " slots: number of hotplug slots (default: none)\n"
> > + " maxmem: maximum amount of guest memory (default:
> > none)\n",
> > QEMU_ARCH_ALL)
> > STEXI
> > @item -m [size=]@var{megs}
> > @findex -m
> > Set virtual RAM size to @var{megs} megabytes. Default is 128 MiB.
> > Optionally,
> > a suffix of ``M'' or ``G'' can be used to signify a value in megabytes or
> > -gigabytes respectively.
> > +gigabytes respectively. Optional pair @var{slots}, @var{maxmem} could be
> > used
> > +to set amount of hotluggable memory slots and possible maximum amount of
> > memory.
> > ETEXI
> >
> > DEF("mem-path", HAS_ARG, QEMU_OPTION_mempath,
> > diff --git a/vl.c b/vl.c
> > index 8fd4ed9..9fb6fa4 100644
> > --- a/vl.c
> > +++ b/vl.c
> > @@ -520,6 +520,14 @@ static QemuOptsList qemu_mem_opts = {
> > .name = "size",
> > .type = QEMU_OPT_SIZE,
> > },
> > + {
> > + .name = "slots",
> > + .type = QEMU_OPT_NUMBER,
> > + },
> > + {
> > + .name = "maxmem",
> > + .type = QEMU_OPT_SIZE,
> > + },
> > { /* end of list */ }
> > },
> > };
> > @@ -2989,6 +2997,8 @@ int main(int argc, char **argv, char **envp)
> > const char *trace_file = NULL;
> > const ram_addr_t default_ram_size = (ram_addr_t)DEFAULT_RAM_SIZE *
> > 1024 * 1024;
> > + ram_addr_t maxram_size = default_ram_size;
> > + uint64_t ram_slots = 0;
> >
> > atexit(qemu_run_exit_notifiers);
> > error_set_progname(argv[0]);
> > @@ -3324,6 +3334,7 @@ int main(int argc, char **argv, char **envp)
> > case QEMU_OPTION_m: {
> > uint64_t sz;
> > const char *mem_str;
> > + const char *maxmem_str, *slots_str;
> >
> > opts = qemu_opts_parse(qemu_find_opts("memory"),
> > optarg, 1);
> > @@ -3365,6 +3376,44 @@ int main(int argc, char **argv, char **envp)
> > error_report("ram size too large");
> > exit(EXIT_FAILURE);
> > }
> > +
> > + maxmem_str = qemu_opt_get(opts, "maxmem");
> > + slots_str = qemu_opt_get(opts, "slots");
> > + if (maxmem_str && slots_str) {
> > + uint64_t slots;
> > +
> > + sz = qemu_opt_get_size(opts, "maxmem", 0);
> > + if (sz < ram_size) {
> > + fprintf(stderr, "qemu: invalid -m option value:
> > maxmem "
> > + "(%" PRIu64 ") <= initial memory (%"
> > + PRIu64 ")\n", sz, ram_size);
> > + exit(EXIT_FAILURE);
> > + }
> > +
> > + slots = qemu_opt_get_number(opts, "slots", 0);
> > + if ((sz > ram_size) && !slots) {
> > + fprintf(stderr, "qemu: invalid -m option value:
> > maxmem "
> > + "(%" PRIu64 ") more than initial memory (%"
> > + PRIu64 ") but no hotplug slots where "
> > + "specified\n", sz, ram_size);
> > + exit(EXIT_FAILURE);
> > + }
> > +
> > + if ((sz <= ram_size) && slots) {
> > + fprintf(stderr, "qemu: invalid -m option value: %"
> > + PRIu64 " hotplug slots where specified but
> > "
> > + "maxmem (%" PRIu64 ") <= initial memory (%"
> > + PRIu64 ")\n", slots, sz, ram_size);
> > + exit(EXIT_FAILURE);
> > + }
> > + maxram_size = sz;
> > + ram_slots = slots;
> > + } else if ((!maxmem_str && slots_str) ||
> > + (maxmem_str && !slots_str)) {
> > + fprintf(stderr, "qemu: invalid -m option value:
> > missing "
> > + "'%s' option\n", slots_str ? "maxmem" :
> > "slots");
> > + exit(EXIT_FAILURE);
> > + }
> > break;
> > }
> > #ifdef CONFIG_TPM
> > @@ -4422,6 +4471,8 @@ int main(int argc, char **argv, char **envp)
> > qdev_machine_init();
> >
> > current_machine->ram_size = ram_size;
> > + current_machine->maxram_size = maxram_size;
> > + current_machine->ram_slots = ram_slots;
> > current_machine->boot_order = boot_order;
> > current_machine->kernel_filename = kernel_filename;
> > current_machine->kernel_cmdline = kernel_cmdline;
> > --
> > 1.7.1
> >
> >
--
Regards,
Igor
