The Wednesday 19 Feb 2014 à 21:42:25 (+0800), Fam Zheng wrote :
> Dropping intermediate could be useful both for commit and stream, and
> BDS refcnt plus bdrv_swap could do most of the job nicely. It also needs
> to work with op blockers.
>
> Signed-off-by: Fam Zheng <f...@redhat.com>
> ---
> block.c | 146
> +++++++++++++++++++++++++--------------------------------
> block/commit.c | 1 +
> 2 files changed, 66 insertions(+), 81 deletions(-)
>
> diff --git a/block.c b/block.c
> index a2bf24c..cf41f3d 100644
> --- a/block.c
> +++ b/block.c
> @@ -2485,115 +2485,99 @@ BlockDriverState *bdrv_find_overlay(BlockDriverState
> *active,
> return overlay;
> }
>
> -typedef struct BlkIntermediateStates {
> - BlockDriverState *bs;
> - QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
> -} BlkIntermediateStates;
> -
> -
> /*
> - * Drops images above 'base' up to and including 'top', and sets the image
> - * above 'top' to have base as its backing file.
> + * Drops images above 'base' up to and including 'top', and sets new 'base'
> + * as backing_hd of top_overlay (the image orignally has 'top' as backing
> + * file). top_overlay may be NULL if 'top' is active, no such update needed.
> + * Requires that the top_overlay to 'top' is opened r/w.
> *
> - * Requires that the overlay to 'top' is opened r/w, so that the backing file
> - * information in 'bs' can be properly updated.
> + * 1) This will convert the following chain:
> *
> - * E.g., this will convert the following chain:
> - * bottom <- base <- intermediate <- top <- active
> + * ... <- base <- ... <- top <- overlay <-... <- active
> *
> * to
> *
> - * bottom <- base <- active
> + * ... <- base <- overlay <- active
> *
> - * It is allowed for bottom==base, in which case it converts:
> + * 2) It is allowed for bottom==base, in which case it converts:
> *
> - * base <- intermediate <- top <- active
> + * base <- ... <- top <- overlay <- ... <- active
> *
> * to
> *
> - * base <- active
> + * base <- overlay <- active
> + *
> + * 2) It also allows active==top, in which case it converts:
> + *
> + * ... <- base <- ... <- top (active)
> + *
> + * to
> + *
> + * ... <- base == active == top
> + *
> + * i.e. only base and lower remains: *top == *base when return.
> + *
> + * 3) If base==NULL, it will drop all the BDS below overlay and set its
> + * backing_hd to NULL. I.e.:
> + *
> + * base(NULL) <- ... <- overlay <- ... <- active
> + *
> + * to
> *
> - * Error conditions:
> - * if active == top, that is considered an error
> + * overlay <- ... <- active
> *
> */
> int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
> BlockDriverState *base)
> {
> - BlockDriverState *intermediate;
> - BlockDriverState *base_bs = NULL;
> - BlockDriverState *new_top_bs = NULL;
> - BlkIntermediateStates *intermediate_state, *next;
> - int ret = -EIO;
> -
> - QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
> - QSIMPLEQ_INIT(&states_to_delete);
> -
> - if (!top->drv || !base->drv) {
> - goto exit;
> - }
> -
> - new_top_bs = bdrv_find_overlay(active, top);
> + BlockDriverState *drop_start, *overlay;
> + int ret = -EINVAL;
>
> - if (new_top_bs == NULL) {
> - /* we could not find the image above 'top', this is an error */
> + if (!top->drv || (base && !base->drv)) {
> goto exit;
> }
> -
> - /* special case of new_top_bs->backing_hd already pointing to base -
> nothing
> - * to do, no intermediate images */
> - if (new_top_bs->backing_hd == base) {
> + if (top == base) {
> ret = 0;
> - goto exit;
> - }
> -
> - intermediate = top;
> -
> - /* now we will go down through the list, and add each BDS we find
> - * into our deletion queue, until we hit the 'base'
> - */
> - while (intermediate) {
> - intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
> - intermediate_state->bs = intermediate;
> - QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
> -
> - if (intermediate->backing_hd == base) {
> - base_bs = intermediate->backing_hd;
> - break;
> + } else if (top == active) {
> + assert(base);
> + drop_start = active->backing_hd;
> + bdrv_swap(active, base);
> + base->backing_hd = NULL;
> + bdrv_unref(drop_start);
> + ret = 0;
> + } else {
> + /* If there's an overlay, its backing_hd points to top's BDS now,
> + * the top image is dropped but this BDS structure is kept and
> swapped
> + * with base, this way we keep the pointers valid after dropping top
> */
> + overlay = bdrv_find_overlay(active, top);
> + if (!overlay) {
> + goto exit;
> + }
> + if (base) {
> + ret = bdrv_change_backing_file(overlay, base->filename,
> + base->drv->format_name);
> + } else {
> + ret = bdrv_change_backing_file(overlay, NULL, NULL);
> + }
> + if (ret) {
> + goto exit;
> + }
> + if (base) {
> + drop_start = top->backing_hd;
> + bdrv_swap(top, base);
> + /* Break the loop formed by bdrv_swap */
> + bdrv_set_backing_hd(base, NULL);
> + } else {
> + bdrv_set_backing_hd(overlay, NULL);
> + drop_start = top;
> }
> - intermediate = intermediate->backing_hd;
> - }
> - if (base_bs == NULL) {
> - /* something went wrong, we did not end at the base. safely
> - * unravel everything, and exit with error */
> - goto exit;
> - }
> -
> - /* success - we can delete the intermediate states, and link top->base */
> - ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
> - base_bs->drv ? base_bs->drv->format_name
> : "");
> - if (ret) {
> - goto exit;
> - }
> - new_top_bs->backing_hd = base_bs;
> -
> - bdrv_refresh_limits(new_top_bs);
>
> - QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry,
> next) {
> - /* so that bdrv_close() does not recursively close the chain */
> - intermediate_state->bs->backing_hd = NULL;
> - bdrv_unref(intermediate_state->bs);
> + bdrv_unref(drop_start);
> }
> - ret = 0;
> -
> exit:
> - QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry,
> next) {
> - g_free(intermediate_state);
> - }
> return ret;
> }
>
> -
> static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
> size_t size)
> {
> diff --git a/block/commit.c b/block/commit.c
> index acec4ac..b10eb79 100644
> --- a/block/commit.c
> +++ b/block/commit.c
> @@ -142,6 +142,7 @@ wait:
> if (!block_job_is_cancelled(&s->common) && sector_num == end) {
> /* success */
> ret = bdrv_drop_intermediate(active, top, base);
> + base = top;
> }
>
> exit_free_buf:
> --
> 1.8.5.4
>
>
This is where I hit peter principle in the reviewing of this series.
Will stop reviewing here and let someone stronger than me continue.
Best regards
Benoît
