On Thu, 2013-12-19 at 11:37 +0200, Marcel Apfelbaum wrote:
> On Wed, 2013-12-18 at 19:20 +0200, Michael S. Tsirkin wrote:
> > On Wed, Dec 18, 2013 at 06:49:24PM +0200, Marcel Apfelbaum wrote:
> > > On Wed, 2013-12-18 at 18:33 +0200, Michael S. Tsirkin wrote:
> > > > On Wed, Dec 18, 2013 at 06:27:12PM +0200, Marcel Apfelbaum wrote:
> > > > > On Wed, 2013-12-18 at 17:22 +0200, Michael S. Tsirkin wrote:
> > > > > > On Wed, Dec 18, 2013 at 03:22:59PM +0100, Paolo Bonzini wrote:
> > > > > > > Il 11/12/2013 10:21, Gal Hammer ha scritto:
> > > > > > > > Fix a bug that was introduced in commit c046e8c4. QEMU fails to
> > > > > > > > resume from suspend mode (S3).
> > > > > > > >
> > > > > > > > Signed-off-by: Gal Hammer <gham...@redhat.com>
> > > > > > > > ---
> > > > > > > > hw/acpi/piix4.c | 1 -
> > > > > > > > 1 file changed, 1 deletion(-)
> > > > > > > >
> > > > > > > > diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c
> > > > > > > > index 93849c8..5c736a4 100644
> > > > > > > > --- a/hw/acpi/piix4.c
> > > > > > > > +++ b/hw/acpi/piix4.c
> > > > > > > > @@ -376,7 +376,6 @@ static void piix4_reset(void *opaque)
> > > > > > > > pci_conf[0x5b] = 0;
> > > > > > > >
> > > > > > > > pci_conf[0x40] = 0x01; /* PM io base read only bit */
> > > > > > > > - pci_conf[0x80] = 0;
> > > > > > > >
> > > > > > > > if (s->kvm_enabled) {
> > > > > > > > /* Mark SMM as already inited (until KVM supports
> > > > > > > > SMM). */
> > > > > > >
> > > > > > > Note this is not the APIC base address, that one is 80h on the ISA
> > > > > > > bridge (function 0). You're changing the behavior for 80h on the
> > > > > > > power
> > > > > > > management function, which is function 3. The register is
> > > > > > > "PMBA—POWER
> > > > > > > MANAGEMENT BASE ADDRESS" and it is indeed initialized by SeaBIOS
> > > > > > > in
> > > > > > > piix4_pm_setup (src/fw/pciinit.c).
> > > > > > >
> > > > > > > Michael, perhaps a part of pci_setup (same file) should run on S3
> > > > > > > resume?
> > > > > > >
> > > > > > > Paolo
> > > > > >
> > > > > > Seems reasonable: either seabios or guest OS must do it, and
> > > > > > guest does not seem to.
> > > > > I was looking into this today, but it seems that we have a problem.
> > > > > We cannot run pci_setup() in init section:
> > > > > .data.varinit.seabios/src/hw/pci.h.66 is VARVERIFY32INIT but used
> > > > > from ['.text.runtime.seabios/src/resume.c.150', '.text.pci_setup']
> > > > >
> > > > > Any thoughts how to get around this?
> > > > > Thanks,
> > > > > Marcel
> > > >
> > > > We defintely don't want to do full pci enumeration.
> > > > Just pci_bios_init_platform or even less.
> > > The problem still remains, we have to use pci_bios_init_device that
> > > in turn uses the PCIDevices list.
> > >
> > > Thanks,
> > > Marcel
> >
> > It does but it does not have to. We can use a chunk out of
> > pci_probe_devices to initialize struct pci_device on stack.
> >
> > Basically something like the below (warning: completely untested,
> > sorry).
> I tested and it works fine for both windows and linux guests!
Actually it doesn't work :(
I was testing a "working hack", not the master branch.
I still think it is the right direction.
Thanks,
Marcel
> Also I agree this is the right thing to do after s3.
> Do you want to submit the patch? (or I can do it, no problem)
>
> Thanks,
> Marcel
>
> >
> > Seems much easier and more robust than building up
> > the list of devices in memory.
> >
> > Signed-off-by: Michael S. Tsirkin <m...@redhat.com>
> >
> >
> > diff --git a/src/hw/pci.h b/src/hw/pci.h
> > index 9c7351d..a64f7c5 100644
> > --- a/src/hw/pci.h
> > +++ b/src/hw/pci.h
> > @@ -66,6 +66,7 @@ extern u64 pcimem64_start, pcimem64_end;
> > extern struct hlist_head PCIDevices;
> > extern int MaxPCIBus;
> > int pci_probe_host(void);
> > +void pci_probe_device(int bdf, struct pci_device *dev);
> > void pci_probe_devices(void);
> > static inline u32 pci_classprog(struct pci_device *pci) {
> > return (pci->class << 8) | pci->prog_if;
> > diff --git a/src/util.h b/src/util.h
> > index e6a6cb5..a8c71a8 100644
> > --- a/src/util.h
> > +++ b/src/util.h
> > @@ -28,6 +28,7 @@ void boot_add_cbfs(void *data, const char *desc, int
> > prio);
> > void interactive_bootmenu(void);
> > void bcv_prepboot(void);
> > struct pci_device;
> > +void pci_bios_init_device(struct pci_device *pci);
> > int bootprio_find_pci_device(struct pci_device *pci);
> > int bootprio_find_scsi_device(struct pci_device *pci, int target, int lun);
> > int bootprio_find_ata_device(struct pci_device *pci, int chanid, int
> > slave);
> > diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c
> > index 34279a4..a35b58d 100644
> > --- a/src/fw/pciinit.c
> > +++ b/src/fw/pciinit.c
> > @@ -293,7 +293,7 @@ static const struct pci_device_id pci_device_tbl[] = {
> > PCI_DEVICE_END,
> > };
> >
> > -static void pci_bios_init_device(struct pci_device *pci)
> > +void pci_bios_init_device(struct pci_device *pci)
> > {
> > u16 bdf = pci->bdf;
> > dprintf(1, "PCI: init bdf=%02x:%02x.%x id=%04x:%04x\n"
> > diff --git a/src/hw/pci.c b/src/hw/pci.c
> > index 6c9aa81..d22804f 100644
> > --- a/src/hw/pci.c
> > +++ b/src/hw/pci.c
> > @@ -105,6 +105,24 @@ pci_probe_host(void)
> > return 0;
> > }
> >
> > +void
> > +pci_probe_device(int bdf, struct pci_device *dev)
> > +{
> > + dev->bdf = bdf;
> > + u32 vendev = pci_config_readl(bdf, PCI_VENDOR_ID);
> > + dev->vendor = vendev & 0xffff;
> > + dev->device = vendev >> 16;
> > + u32 classrev = pci_config_readl(bdf, PCI_CLASS_REVISION);
> > + dev->class = classrev >> 16;
> > + dev->prog_if = classrev >> 8;
> > + dev->revision = classrev & 0xff;
> > + dev->header_type = pci_config_readb(bdf, PCI_HEADER_TYPE);
> > + u8 v = dev->header_type & 0x7f;
> > + if (v == PCI_HEADER_TYPE_BRIDGE || v == PCI_HEADER_TYPE_CARDBUS) {
> > + u8 secbus = pci_config_readb(bdf, PCI_SECONDARY_BUS);
> > + dev->secondary_bus = secbus;
> > + }
> > +}
> > // Find all PCI devices and populate PCIDevices linked list.
> > void
> > pci_probe_devices(void)
> > @@ -145,21 +163,12 @@ pci_probe_devices(void)
> > }
> >
> > // Populate pci_device info.
> > - dev->bdf = bdf;
> > + pci_probe_device(bdf, dev);
> > dev->parent = parent;
> > dev->rootbus = rootbus;
> > - u32 vendev = pci_config_readl(bdf, PCI_VENDOR_ID);
> > - dev->vendor = vendev & 0xffff;
> > - dev->device = vendev >> 16;
> > - u32 classrev = pci_config_readl(bdf, PCI_CLASS_REVISION);
> > - dev->class = classrev >> 16;
> > - dev->prog_if = classrev >> 8;
> > - dev->revision = classrev & 0xff;
> > - dev->header_type = pci_config_readb(bdf, PCI_HEADER_TYPE);
> > u8 v = dev->header_type & 0x7f;
> > if (v == PCI_HEADER_TYPE_BRIDGE || v ==
> > PCI_HEADER_TYPE_CARDBUS) {
> > - u8 secbus = pci_config_readb(bdf, PCI_SECONDARY_BUS);
> > - dev->secondary_bus = secbus;
> > + u8 secbus = dev->secondary_bus;
> > if (secbus > bus && !busdevs[secbus])
> > busdevs[secbus] = dev;
> > if (secbus > MaxPCIBus)
> > diff --git a/src/resume.c b/src/resume.c
> > index fc2fee9..f6c8b3b 100644
> > --- a/src/resume.c
> > +++ b/src/resume.c
> > @@ -101,6 +101,14 @@ s3_resume(void)
> > pic_setup();
> > smm_setup();
> >
> > + int bdf;
> > + foreachbdf(bdf, 0) {
> > + struct pci_device pci;
> > +
> > + pci_probe_device(bdf, &pci);
> > + pci_bios_init_device(&pci);
> > + }
> > +
> > s3_resume_vga();
> >
> > make_bios_readonly();
>
>
>
>
