On Wed, Dec 4, 2013 at 6:09 PM, liguang <lig.f...@cn.fujitsu.com> wrote:
> Signed-off-by: liguang <lig.f...@cn.fujitsu.com>
> ---
> default-configs/arm-softmmu.mak | 2 +
> hw/timer/Makefile.objs | 2 +
> hw/timer/allwinner-a10-pit.c | 253
> ++++++++++++++++++++++++++++++++++
> include/hw/timer/allwinner-a10-pit.h | 57 ++++++++
> 4 files changed, 314 insertions(+), 0 deletions(-)
> create mode 100644 hw/timer/allwinner-a10-pit.c
> create mode 100644 include/hw/timer/allwinner-a10-pit.h
>
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index a555eef..0029596 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -81,3 +81,5 @@ CONFIG_VERSATILE_I2C=y
>
> CONFIG_SDHCI=y
> CONFIG_INTEGRATOR_DEBUG=y
> +
> +CONFIG_ALLWINNER_A10=y
> diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs
> index eca5905..3020388 100644
> --- a/hw/timer/Makefile.objs
> +++ b/hw/timer/Makefile.objs
> @@ -27,3 +27,5 @@ obj-$(CONFIG_SH4) += sh_timer.o
> obj-$(CONFIG_TUSB6010) += tusb6010.o
>
> obj-$(CONFIG_MC146818RTC) += mc146818rtc.o
> +
> +obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10-pit.o
> diff --git a/hw/timer/allwinner-a10-pit.c b/hw/timer/allwinner-a10-pit.c
> new file mode 100644
> index 0000000..2305813
> --- /dev/null
> +++ b/hw/timer/allwinner-a10-pit.c
> @@ -0,0 +1,253 @@
> +/*
> + * Allwinner A10 timer device emulation
> + *
> + * Copyright (C) 2013 Li Guang
> + * Written by Li Guang <lig.f...@cn.fujitsu.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> + * for more details.
> + */
> +
> +#include "hw/sysbus.h"
> +#include "sysemu/sysemu.h"
> +#include "hw/timer/allwinner-a10-pit.h"
> +
> +
Not sure of the motivation for extra blank lines.
> +static uint64_t a10_pit_read(void *opaque, hwaddr offset, unsigned size)
> +{
> + AwA10PITState *s = AW_A10_PIT(opaque);
> + uint8_t index;
> +
> + switch (offset) {
> + case AW_A10_PIT_TIMER_IRQ_EN:
> + return s->irq_enable;
> + case AW_A10_PIT_TIMER_IRQ_ST:
> + return s->irq_status;
> + case AW_A10_PIT_TIMER_BASE ... AW_A10_PIT_TIMER_BASE * 6 +
> AW_A10_PIT_TIMER_COUNT:
It's strange to me that AW_A10_PIT_TIMER_BASE is used as both an
offset and a stride. It's only co-incidence that 0x10 is both the
offset of the first timers' individual registers as well as the diff
between timer register offsets. I think you could just simplify by
putting it all in the header, something like:
#define AW_A10_PIT_TIMER_BASE_END (AW_A10_PIT_TIMER_BASE * 6 + 0x10).
> + index = offset & 0xf0;
> + index >>= 4;
> + index -= 1;
> + switch (offset & 0x0f) {
> + case AW_A10_PIT_TIMER_CONTROL:
> + return s->control[index];
> + case AW_A10_PIT_TIMER_INTERVAL:
> + return s->interval[index];
> + case AW_A10_PIT_TIMER_COUNT:
> + s->count[index] = ptimer_get_count(s->timer[index]);
> + return s->count[index];
> + default:
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Bad offset 0x%x\n", __func__, (int)offset);
> + break;
> + }
> + case AW_A10_PIT_WDOG_CONTROL:
> + break;
> + case AW_A10_PIT_WDOG_MODE:
> + break;
> + case AW_A10_PIT_COUNT_LO:
> + return s->count_lo;
> + case AW_A10_PIT_COUNT_HI:
> + return s->count_hi;
> + case AW_A10_PIT_COUNT_CTL:
> + return s->count_ctl;
> + default:
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Bad offset 0x%x\n", __func__, (int)offset);
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static void a10_pit_write(void *opaque, hwaddr offset, uint64_t value,
> + unsigned size)
> +{
> + AwA10PITState *s = AW_A10_PIT(opaque);
> + uint8_t index;
> +
> + switch (offset) {
> + case AW_A10_PIT_TIMER_IRQ_EN:
> + s->irq_enable = value;
> + break;
> + case AW_A10_PIT_TIMER_IRQ_ST:
> + s->irq_status &= ~value;
> + break;
> + case AW_A10_PIT_TIMER_BASE ... AW_A10_PIT_TIMER_BASE * 6 +
> AW_A10_PIT_TIMER_COUNT:
> + index = offset & 0xf0;
> + index >>= 4;
> + index -= 1;
> + switch (offset & 0x0f) {
> + case AW_A10_PIT_TIMER_CONTROL:
> + s->control[index] = value;
> + if (s->control[index] & AW_A10_PIT_TIMER_RELOAD) {
> + ptimer_set_count(s->timer[index], s->interval[index]);
> + }
> + if (s->control[index] & AW_A10_PIT_TIMER_EN) {
> + int oneshot = 0;
> + if (s->control[index] & AW_A10_PIT_TIMER_MODE) {
> + oneshot = 1;
> + }
> + ptimer_run(s->timer[index], oneshot);
> + } else {
> + ptimer_stop(s->timer[index]);
> + }
> + break;
> + case AW_A10_PIT_TIMER_INTERVAL:
> + s->interval[index] = value;
> + ptimer_set_limit(s->timer[index], s->interval[index], 1);
> + break;
> + case AW_A10_PIT_TIMER_COUNT:
> + s->count[index] = value;
> + break;
> + default:
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Bad offset 0x%x\n", __func__, (int)offset);
> + }
> + break;
> + case AW_A10_PIT_WDOG_CONTROL:
> + s->watch_dog_control = value;
> + break;
> + case AW_A10_PIT_WDOG_MODE:
> + s->watch_dog_mode = value;
> + break;
> + case AW_A10_PIT_COUNT_LO:
> + s->count_lo = value;
> + break;
> + case AW_A10_PIT_COUNT_HI:
> + s->count_hi = value;
> + break;
> + case AW_A10_PIT_COUNT_CTL:
> + s->count_ctl = value;
> + if (s->count_ctl & AW_A10_PIT_COUNT_RL_EN) {
> + s->count_lo = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
> + s->count_hi = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) >> 32;
Sorry for not spotting this one earlier (i'm going full line by line
now), but you should just do the one call to qemu_clock_get_ns
(capture to local variable).
Whats probably cleanest is to implement s->count as uint64_t and just
use deposit64/extract64 in MMIO read/write fns. Saves about 5 LOC and
is a little more self documenting.
You counter is also implicitly 1GHz right? that's probably worth a comment.
Regards,
Peter
PS. You are still re-spinning very fast. Can I suggest 24hr as a
minimum wait to give other reviewers a chance? That gives all the
global timezones a chance to participate. I did a high level review of
one of your new patches last night at home, but I haven't had a chance
to look at this properly till this morning (at work) yet you have
already respun on me. Persoanally, I'm going for 48h respins atm.
> + s->count_ctl &= ~AW_A10_PIT_COUNT_RL_EN;
> + }
> + if (s->count_ctl & AW_A10_PIT_COUNT_CLR_EN) {
> + s->count_lo = 0;
> + s->count_hi = 0;
> + s->count_ctl &= ~AW_A10_PIT_COUNT_CLR_EN;
> + }
> + break;
> + default:
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Bad offset 0x%x\n", __func__, (int)offset);
> + break;
> + }
> +}
> +
> +static const MemoryRegionOps a10_pit_ops = {
> + .read = a10_pit_read,
> + .write = a10_pit_write,
> + .endianness = DEVICE_NATIVE_ENDIAN,
> +};
> +
> +static const VMStateDescription vmstate_a10_pit = {
> + .name = "a10.pit",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .minimum_version_id_old = 1,
> + .fields = (VMStateField[]) {
> + VMSTATE_UINT32(irq_enable, AwA10PITState),
> + VMSTATE_UINT32(irq_status, AwA10PITState),
> + VMSTATE_UINT32_ARRAY(control, AwA10PITState, AW_A10_PIT_TIMER_NR),
> + VMSTATE_UINT32_ARRAY(interval, AwA10PITState, AW_A10_PIT_TIMER_NR),
> + VMSTATE_UINT32_ARRAY(count, AwA10PITState, AW_A10_PIT_TIMER_NR),
> + VMSTATE_UINT32(watch_dog_mode, AwA10PITState),
> + VMSTATE_UINT32(watch_dog_control, AwA10PITState),
> + VMSTATE_UINT32(count_lo, AwA10PITState),
> + VMSTATE_UINT32(count_hi, AwA10PITState),
> + VMSTATE_UINT32(count_ctl, AwA10PITState),
> + VMSTATE_PTIMER_ARRAY(timer, AwA10PITState, AW_A10_PIT_TIMER_NR),
> + VMSTATE_END_OF_LIST()
> + }
> +};
> +
> +static void a10_pit_reset(DeviceState *dev)
> +{
> + AwA10PITState *s = AW_A10_PIT(dev);
> + uint8_t i;
> +
> + s->irq_enable = 0;
> + s->irq_status = 0;
> + for (i = 0; i < 6; i++) {
> + s->control[i] = AW_A10_PIT_DEFAULT_CLOCK;
> + s->interval[i] = 0;
> + s->count[i] = 0;
> + ptimer_stop(s->timer[i]);
> + }
> + s->watch_dog_mode = 0;
> + s->watch_dog_control = 0;
> + s->count_lo = 0;
> + s->count_hi = 0;
> + s->count_ctl = 0;
> +}
> +
> +static void a10_pit_timer_cb(void *opaque)
> +{
> + AwA10PITState *s = AW_A10_PIT(opaque);
> + uint8_t i;
> +
> + for (i = 0; i < AW_A10_PIT_TIMER_NR; i++) {
> + if (s->control[i] & AW_A10_PIT_TIMER_EN) {
> + s->irq_status |= 1 << i;
> + if (s->control[i] & AW_A10_PIT_TIMER_MODE) {
> + ptimer_stop(s->timer[i]);
> + s->control[i] &= ~AW_A10_PIT_TIMER_EN;
> + }
> + qemu_irq_pulse(s->irq[i]);
> + }
> + }
> +}
> +
> +static void a10_pit_realize(DeviceState *dev, Error **errp)
> +{
> + AwA10PITState *s = AW_A10_PIT(dev);
> + SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
> + QEMUBH * bh[AW_A10_PIT_TIMER_NR];
> + uint8_t i;
> +
> + for (i = 0; i < AW_A10_PIT_TIMER_NR; i++) {
> + sysbus_init_irq(sbd, &s->irq[i]);
> + }
> + memory_region_init_io(&s->iomem, OBJECT(s), &a10_pit_ops, s,
> + TYPE_AW_A10_PIT, 0x400);
> + sysbus_init_mmio(sbd, &s->iomem);
> +
> + for (i = 0; i < AW_A10_PIT_TIMER_NR; i++) {
> + bh[i] = qemu_bh_new(a10_pit_timer_cb, s);
> + s->timer[i] = ptimer_init(bh[i]);
> + ptimer_set_freq(s->timer[i], 240000);
> + }
> +}
> +
> +static void a10_pit_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> +
> + dc->realize = a10_pit_realize;
> + dc->reset = a10_pit_reset;
> + dc->desc = "allwinner a10 timer";
> + dc->vmsd = &vmstate_a10_pit;
> +}
> +
> +static const TypeInfo a10_pit_info = {
> + .name = TYPE_AW_A10_PIT,
> + .parent = TYPE_SYS_BUS_DEVICE,
> + .instance_size = sizeof(AwA10PITState),
> + .class_init = a10_pit_class_init,
> +};
> +
> +static void a10_register_types(void)
> +{
> + type_register_static(&a10_pit_info);
> +}
> +
> +type_init(a10_register_types);
> diff --git a/include/hw/timer/allwinner-a10-pit.h
> b/include/hw/timer/allwinner-a10-pit.h
> new file mode 100644
> index 0000000..329c05c
> --- /dev/null
> +++ b/include/hw/timer/allwinner-a10-pit.h
> @@ -0,0 +1,57 @@
> +#ifndef AW_A10_PIT_H
> +#define AW_A10_PIT_H
> +
> +#include "hw/ptimer.h"
> +
> +#define TYPE_AW_A10_PIT "Allwinner-A10-timer"
> +#define AW_A10_PIT(obj) OBJECT_CHECK(AwA10PITState, (obj), TYPE_AW_A10_PIT)
> +
> +#define AW_A10_PIT_TIMER_NR 6
> +#define AW_A10_PIT_TIMER_IRQ 0x1
> +#define AW_A10_PIT_WDOG_IRQ 0x100
> +
> +#define AW_A10_PIT_TIMER_IRQ_EN 0
> +#define AW_A10_PIT_TIMER_IRQ_ST 0x4
> +
> +#define AW_A10_PIT_TIMER_CONTROL 0x0
> +#define AW_A10_PIT_TIMER_EN 0x1
> +#define AW_A10_PIT_TIMER_RELOAD 0x2
> +#define AW_A10_PIT_TIMER_MODE 0x80
> +
> +#define AW_A10_PIT_TIMER_INTERVAL 0x4
> +#define AW_A10_PIT_TIMER_COUNT 0x8
> +#define AW_A10_PIT_WDOG_CONTROL 0x90
> +#define AW_A10_PIT_WDOG_MODE 0x94
> +
> +#define AW_A10_PIT_COUNT_CTL 0xa0
> +#define AW_A10_PIT_COUNT_RL_EN 0x2
> +#define AW_A10_PIT_COUNT_CLR_EN 0x1
> +#define AW_A10_PIT_COUNT_LO 0xa4
> +#define AW_A10_PIT_COUNT_HI 0xa8
> +
> +#define AW_A10_PIT_TIMER_BASE 0x10
> +
> +#define AW_A10_PIT_DEFAULT_CLOCK 0x4
> +
> +typedef struct AwA10PITState {
> + /*< private >*/
> + SysBusDevice parent_obj;
> + /*< public >*/
> + qemu_irq irq[AW_A10_PIT_TIMER_NR];
> + ptimer_state *timer[AW_A10_PIT_TIMER_NR];
> + MemoryRegion iomem;
> +
> + uint32_t irq_enable;
> + uint32_t irq_status;
> + uint32_t control[AW_A10_PIT_TIMER_NR];
> + uint32_t interval[AW_A10_PIT_TIMER_NR];
> + uint32_t count[AW_A10_PIT_TIMER_NR];
> + uint32_t watch_dog_mode;
> + uint32_t watch_dog_control;
> + uint32_t count_lo;
> + uint32_t count_hi;
> + uint32_t count_ctl;
> +} AwA10PITState;
> +
> +#endif
> +
> --
> 1.7.2.5
>
>
