On Wed, 2013-10-02 at 15:41 +0300, Marcel Apfelbaum wrote:
> pci_set_irq and the other pci irq wrappers use
> PCI_INTERRUPT_PIN config register to compute device
> INTx pin to assert/deassert.
>
> Save INTx pin into the config register before calling
> pci_set_irq
>
> Signed-off-by: Marcel Apfelbaum <marce...@redhat.com>
> ---
> hw/misc/vfio.c | 11 ++++++-----
> 1 file changed, 6 insertions(+), 5 deletions(-)
Seems ok, but why not take advantage of the pci_irq_raise/lower()
wrappers? BTW, with PCI being active low, should those be
assert/deassert to avoid confusion confusion with the actual signal
level? Thanks,
Alex
>
> diff --git a/hw/misc/vfio.c b/hw/misc/vfio.c
> index a1c08fb..3d7297c 100644
> --- a/hw/misc/vfio.c
> +++ b/hw/misc/vfio.c
> @@ -297,7 +297,7 @@ static void vfio_intx_interrupt(void *opaque)
> 'A' + vdev->intx.pin);
>
> vdev->intx.pending = true;
> - qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 1);
> + pci_set_irq(&vdev->pdev, 1);
> vfio_mmap_set_enabled(vdev, false);
> if (vdev->intx.mmap_timeout) {
> timer_mod(vdev->intx.mmap_timer,
> @@ -315,7 +315,7 @@ static void vfio_eoi(VFIODevice *vdev)
> vdev->host.bus, vdev->host.slot, vdev->host.function);
>
> vdev->intx.pending = false;
> - qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 0);
> + pci_set_irq(&vdev->pdev, 0);
> vfio_unmask_intx(vdev);
> }
>
> @@ -341,7 +341,7 @@ static void vfio_enable_intx_kvm(VFIODevice *vdev)
> qemu_set_fd_handler(irqfd.fd, NULL, NULL, vdev);
> vfio_mask_intx(vdev);
> vdev->intx.pending = false;
> - qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 0);
> + pci_set_irq(&vdev->pdev, 0);
>
> /* Get an eventfd for resample/unmask */
> if (event_notifier_init(&vdev->intx.unmask, 0)) {
> @@ -417,7 +417,7 @@ static void vfio_disable_intx_kvm(VFIODevice *vdev)
> */
> vfio_mask_intx(vdev);
> vdev->intx.pending = false;
> - qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 0);
> + pci_set_irq(&vdev->pdev, 0);
>
> /* Tell KVM to stop listening for an INTx irqfd */
> if (kvm_vm_ioctl(kvm_state, KVM_IRQFD, &irqfd)) {
> @@ -488,6 +488,7 @@ static int vfio_enable_intx(VFIODevice *vdev)
> vfio_disable_interrupts(vdev);
>
> vdev->intx.pin = pin - 1; /* Pin A (1) -> irq[0] */
> + pci_config_set_interrupt_pin(vdev->pdev.config, pin);
>
> #ifdef CONFIG_KVM
> /*
> @@ -547,7 +548,7 @@ static void vfio_disable_intx(VFIODevice *vdev)
> vfio_disable_intx_kvm(vdev);
> vfio_disable_irqindex(vdev, VFIO_PCI_INTX_IRQ_INDEX);
> vdev->intx.pending = false;
> - qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 0);
> + pci_set_irq(&vdev->pdev, 0);
> vfio_mmap_set_enabled(vdev, true);
>
> fd = event_notifier_get_fd(&vdev->intx.interrupt);
