<snip> > > How do I make sure that qemu is using the virtual HBA or (vport)? > > From my limited knowledge of NPIV, after you create the vport on the host > you'll have a new "SCSI host" which scans LUNs. That means new SCSI > devices appear on the host. > > You can use "ls -al /sys/class/scsi_host" to see the SCSI hosts that are > active. >
Also, there will be a /sys/class/fc_host, associated with the scsi_host. It will have a port_type, that when read, should show "NPIV VPORT". //Rob
