On Tue, Nov 24, 2009 at 02:38:12PM +0000, Jamie Lokier wrote:
> Gleb Natapov wrote:
> > On Mon, Nov 23, 2009 at 10:30:56PM +0100, Sebastian Herbszt wrote:
> > > Gleb Natapov wrote:
> > > >On Mon, Nov 23, 2009 at 08:19:54PM +0100, Sebastian Herbszt wrote:
> > > >>Gleb Natapov wrote:
> > > >>>On Sun, Nov 22, 2009 at 09:01:45PM +0100, Sebastian Herbszt wrote:
> > > >>>>Gleb Natapov wrote:
> > > >>>>>On Sun, Nov 22, 2009 at 04:31:24PM +0100, Sebastian Herbszt wrote:
> > > >>>>>>
> > > >>>>>>Bad things could happen if someone modifies the BIOS because it's
> > > >>>>>>unprotected
> > > >>>>>>(e.g. VM crash).
> > > >>>>>>
> > > >>>>>BIOS is reloaded during VM reset.
> > > >>>>
> > > >>>>The BIOS is not reloaded - tested with "reboot" on Linux and
> > > >>>>system_reset in monitor.
> > > >>>>
> > > >>>Looks like a bug. Tested with latest QEMU version I assume?
> > > >>
> > > >>Tested with v0.11.0-rc0-1677-gf165b53. Where do you suspect a bug? In
> > > >>the behaviour
> > > >>on "reboot" or system_reset? I think it depends wheter it's a software
> > > >>or hardware reset.
> > > >>
> > > >The bug is that BIOS rom is not reloaded on hardware reset (what do you
> > > >call software reset?). Can you retest with latest git?
> > >
> > > Same with v0.11.0-rc0-1699-gb0293e5.
> > > Bochs has the notion of BX_RESET_SOFTWARE and BX_RESET_HARDWARE. Those
> > > two describe the source of the reset and the hardware, in most cases just
> > > the cpu, is reset
> > > differently depending on the source (e.g. hardware reset / power on vs.
> > > INIT#). I think this
> > > behaviour is also described in the 440fx spec (chapter "4.5.3 SYSTEM
> > > RESET").
> > >
> > > If the monitor command "system_reset" is supposed to be the equivalent of
> > > pushing the reset
> > > button of the box, then the bios should be reloaded (i think, not
> > > entirely sure what the pin is
> > > wired to). But the bios should not be reloaded if the OS just jumps to
> > > the bios reset code.
> > >
> > Correct, but modern OSes never jump to the bios reset code. They use
> > ACPI reset, kbd reset or triple fault to do reset. All of those generate
> > exactly the same kind of reset as "system_reset" monitor command.
>
> Modern OSes don't (though Linux still has the option reboot=bios which
> jumps to the BIOS reset code, because that's needed on some PCs!).
>
> But QEMU is used to run old OSes too.
>
That's OK. I don't expect BIOS to be reloaded if OS restart by jumping
to BIOS reset code.
--
Gleb.
