From: James Hogan <james.ho...@imgtec.com>
Commit a427338 (mips_malta: correct reading MIPS revision at 0x1fc00010)
altered the behaviour of the monitor flash mapping at the reset address
by making it read only. However this causes data bus error exceptions
when it is written to since it is effectively unassigned memory for
writes. This isn't how the real hardware behaves. That memory can be
written to (even with the MFWR jumper not fitted) and the new value read
back from, but it doesn't get written back to the monitor flash so is
volatile.
This is fixed by converting the bios copy from read only ram to a bios
device with a nop write callback.
Signed-off-by: James Hogan <james.ho...@imgtec.com>
Cc: Paul Burton <paul.bur...@imgtec.com>
Cc: Leon Alrae <leon.al...@imgtec.com>
Cc: Aurelien Jarno <aurel...@aurel32.net>
Signed-off-by: Leon Alrae <leon.al...@imgtec.com>
---
hw/mips/mips_malta.c | 14 ++++++++++++--
1 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/hw/mips/mips_malta.c b/hw/mips/mips_malta.c
index f8d064c..9e721d3 100644
--- a/hw/mips/mips_malta.c
+++ b/hw/mips/mips_malta.c
@@ -873,6 +873,16 @@ static void cpu_request_exit(void *opaque, int irq, int
level)
}
}
+static void monflash_copy_mem_write(void *opaque, hwaddr ram_addr,
+ uint64_t val, unsigned size)
+{
+}
+
+static const MemoryRegionOps monflash_copy_mem_ops = {
+ .write = monflash_copy_mem_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
static
void mips_malta_init(QEMUMachineInitArgs *args)
{
@@ -1043,13 +1053,13 @@ void mips_malta_init(QEMUMachineInitArgs *args)
* handled by an overlapping region as the resulting ROM code subpage
* regions are not executable.
*/
- memory_region_init_ram(bios_copy, NULL, "bios.1fc", BIOS_SIZE);
+ memory_region_init_rom_device(bios_copy, NULL, &monflash_copy_mem_ops,
NULL,
+ "bios.1fc", BIOS_SIZE);
if (!rom_copy(memory_region_get_ram_ptr(bios_copy),
FLASH_ADDRESS, BIOS_SIZE)) {
memcpy(memory_region_get_ram_ptr(bios_copy),
memory_region_get_ram_ptr(bios), BIOS_SIZE);
}
- memory_region_set_readonly(bios_copy, true);
memory_region_add_subregion(system_memory, RESET_ADDRESS, bios_copy);
/* Board ID = 0x420 (Malta Board with CoreLV) */
--
1.7.5.4
