Am 30.06.2013 03:26, schrieb Alexander Graf: > s/^I/ /g on the file with a few manual tweaks to align things. > > Signed-off-by: Alexander Graf <ag...@suse.de> > --- > hw/misc/macio/mac_dbdma.c | 102 > +++++++++++++++++++++++----------------------- > 1 file changed, 51 insertions(+), 51 deletions(-) > > diff --git a/hw/misc/macio/mac_dbdma.c b/hw/misc/macio/mac_dbdma.c > index 2fc7f87..ab174f5 100644 > --- a/hw/misc/macio/mac_dbdma.c > +++ b/hw/misc/macio/mac_dbdma.c > @@ -85,75 +85,75 @@ > > /* Bits in control and status registers */ > > -#define RUN 0x8000 > -#define PAUSE 0x4000 > -#define FLUSH 0x2000 > -#define WAKE 0x1000 > -#define DEAD 0x0800 > -#define ACTIVE 0x0400 > -#define BT 0x0100 > -#define DEVSTAT 0x00ff > +#define RUN 0x8000 > +#define PAUSE 0x4000 > +#define FLUSH 0x2000 > +#define WAKE 0x1000 > +#define DEAD 0x0800 > +#define ACTIVE 0x0400 > +#define BT 0x0100 > +#define DEVSTAT 0x00ff > > /* > * DBDMA command structure. These fields are all little-endian! > */ > > typedef struct dbdma_cmd { > - uint16_t req_count; /* requested byte transfer count */ > - uint16_t command; /* command word (has bit-fields) */ > - uint32_t phy_addr; /* physical data address */ > - uint32_t cmd_dep; /* command-dependent field */ > - uint16_t res_count; /* residual count after completion */ > - uint16_t xfer_status; /* transfer status */ > + uint16_t req_count; /* requested byte transfer count */ > + uint16_t command; /* command word (has bit-fields) */ > + uint32_t phy_addr; /* physical data address */ > + uint32_t cmd_dep; /* command-dependent field */ > + uint16_t res_count; /* residual count after completion */ > + uint16_t xfer_status; /* transfer status */ > } dbdma_cmd; > > /* DBDMA command values in command field */ > > #define COMMAND_MASK 0xf000 > -#define OUTPUT_MORE 0x0000 /* transfer memory data to stream */ > -#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */ > -#define INPUT_MORE 0x2000 /* transfer stream data to memory */ > -#define INPUT_LAST 0x3000 /* ditto, expect end marker */ > -#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */ > -#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */ > -#define DBDMA_NOP 0x6000 /* do nothing */ > -#define DBDMA_STOP 0x7000 /* suspend processing */ > +#define OUTPUT_MORE 0x0000 /* transfer memory data to stream */ > +#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */ > +#define INPUT_MORE 0x2000 /* transfer stream data to memory */ > +#define INPUT_LAST 0x3000 /* ditto, expect end marker */ > +#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg > */ > +#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg > */ > +#define DBDMA_NOP 0x6000 /* do nothing */ > +#define DBDMA_STOP 0x7000 /* suspend processing */ > > /* Key values in command field */ > > #define KEY_MASK 0x0700 > -#define KEY_STREAM0 0x0000 /* usual data stream */ > -#define KEY_STREAM1 0x0100 /* control/status stream */ > -#define KEY_STREAM2 0x0200 /* device-dependent stream */ > -#define KEY_STREAM3 0x0300 /* device-dependent stream */ > -#define KEY_STREAM4 0x0400 /* reserved */ > -#define KEY_REGS 0x0500 /* device register space */ > -#define KEY_SYSTEM 0x0600 /* system memory-mapped space */ > -#define KEY_DEVICE 0x0700 /* device memory-mapped space */ > +#define KEY_STREAM0 0x0000 /* usual data stream */ > +#define KEY_STREAM1 0x0100 /* control/status stream */ > +#define KEY_STREAM2 0x0200 /* device-dependent stream */ > +#define KEY_STREAM3 0x0300 /* device-dependent stream */ > +#define KEY_STREAM4 0x0400 /* reserved */ > +#define KEY_REGS 0x0500 /* device register space */ > +#define KEY_SYSTEM 0x0600 /* system memory-mapped space */ > +#define KEY_DEVICE 0x0700 /* device memory-mapped space */ > > /* Interrupt control values in command field */ > > #define INTR_MASK 0x0030 > -#define INTR_NEVER 0x0000 /* don't interrupt */ > -#define INTR_IFSET 0x0010 /* intr if condition bit is 1 */ > -#define INTR_IFCLR 0x0020 /* intr if condition bit is 0 */ > -#define INTR_ALWAYS 0x0030 /* always interrupt */ > +#define INTR_NEVER 0x0000 /* don't interrupt */ > +#define INTR_IFSET 0x0010 /* intr if condition bit is 1 */ > +#define INTR_IFCLR 0x0020 /* intr if condition bit is 0 */ > +#define INTR_ALWAYS 0x0030 /* always interrupt */ > > /* Branch control values in command field */ > > #define BR_MASK 0x000c > -#define BR_NEVER 0x0000 /* don't branch */ > -#define BR_IFSET 0x0004 /* branch if condition bit is 1 */ > -#define BR_IFCLR 0x0008 /* branch if condition bit is 0 */ > -#define BR_ALWAYS 0x000c /* always branch */ > +#define BR_NEVER 0x0000 /* don't branch */ > +#define BR_IFSET 0x0004 /* branch if condition bit is 1 */ > +#define BR_IFCLR 0x0008 /* branch if condition bit is 0 */ > +#define BR_ALWAYS 0x000c /* always branch */ > > /* Wait control values in command field */ > > #define WAIT_MASK 0x0003 > -#define WAIT_NEVER 0x0000 /* don't wait */ > -#define WAIT_IFSET 0x0001 /* wait if condition bit is 1 */ > -#define WAIT_IFCLR 0x0002 /* wait if condition bit is 0 */ > -#define WAIT_ALWAYS 0x0003 /* always wait */ > +#define WAIT_NEVER 0x0000 /* don't wait */ > +#define WAIT_IFSET 0x0001 /* wait if condition bit is 1 */ > +#define WAIT_IFCLR 0x0002 /* wait if condition bit is 0 */ > +#define WAIT_ALWAYS 0x0003 /* always wait */ > > typedef struct DBDMA_channel { > int channel; > @@ -558,11 +558,11 @@ static void channel_run(DBDMA_channel *ch) > switch (cmd) { > case DBDMA_NOP: > nop(ch); > - return; > + return; > > case DBDMA_STOP: > stop(ch); > - return; > + return; > } > > key = le16_to_cpu(current->command) & 0x0700; > @@ -578,19 +578,19 @@ static void channel_run(DBDMA_channel *ch) > switch (cmd) { > case OUTPUT_MORE: > start_output(ch, key, phy_addr, req_count, 0); > - return; > + return; > > case OUTPUT_LAST: > start_output(ch, key, phy_addr, req_count, 1); > - return; > + return; > > case INPUT_MORE: > start_input(ch, key, phy_addr, req_count, 0); > - return; > + return; > > case INPUT_LAST: > start_input(ch, key, phy_addr, req_count, 1); > - return; > + return; > } > > if (key < KEY_REGS) { > @@ -615,11 +615,11 @@ static void channel_run(DBDMA_channel *ch) > switch (cmd) { > case LOAD_WORD: > load_word(ch, key, phy_addr, req_count); > - return; > + return; > > case STORE_WORD: > store_word(ch, key, phy_addr, req_count); > - return; > + return; > } > } > > @@ -720,7 +720,7 @@ static void dbdma_write(void *opaque, hwaddr addr, > > if (reg == DBDMA_CMDPTR_LO && > (ch->regs[DBDMA_STATUS] & (RUN | ACTIVE))) > - return; > + return;
Add braces while at it? Otherwise fine. Andreas > > ch->regs[reg] = value; > > -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg