On Wed, May 08, 2013 at 01:29:12PM +0300, Michael S. Tsirkin wrote:
> On Wed, May 08, 2013 at 12:31:50PM +0300, Gleb Natapov wrote:
> > On Tue, May 07, 2013 at 07:01:13PM -0400, Kevin O'Connor wrote:
> > > On Tue, May 07, 2013 at 09:00:48PM +0300, Michael S. Tsirkin wrote:
> > > > On Thu, Apr 25, 2013 at 12:02:20PM +0300, Michael S. Tsirkin wrote:
> > > > > Untested yet, but I thought I'd share the
> > > > > BIOS bits so we can agree on direction.
> > > > >
> > > > > In particular check out ROM sizes:
> > > > > - Before patchset with DSDT enabled
> > > > > Total size: 127880 Fixed: 59060 Free: 3192 (used 97.6% of
> > > > > 128KiB rom)
> > > > > - Before patchset with DSDT disabled
> > > > > Total size: 122844 Fixed: 58884 Free: 8228 (used 93.7% of
> > > > > 128KiB rom)
> > > > > - After patchset:
> > > > > Total size: 128776 Fixed: 59100 Free: 2296 (used 98.2% of
> > > > > 128KiB rom)
> > > > > - Legacy disabled at build time:
> > > > > Total size: 119836 Fixed: 58996 Free: 11236 (used 91.4% of
> > > > > 128KiB rom)
> > > > >
> > > > > As can be seen from this, most size savings come
> > > > > from dropping DSDT, but we do save a bit by removing
> > > > > other tables. Of course the real reason to move tables to QEMU
> > > > > is so that ACPI can better match hardware.
> > > > >
> > > > > This patchset adds an option to move all code for formatting acpi
> > > > > tables
> > > > > out of BIOS. With this, QEMU has full control over the table layout.
> > > > > All tables are loaded from the new "/etc/acpi/" directory.
> > > > > Any entries in this directory cause BIOS to disable
> > > > > ACPI table generation completely.
> > > > > A generic linker script, controlled by QEMU, is
> > > > > loaded from "/etc/linker-script". It is used to
> > > > > patch in table pointers and checksums.
> > > >
> > > > After some thought, there are two additional
> > > > options worth considering, in that they simplify
> > > > bios code somewhat:
> > > >
> > > > - bios could get size from qemu, allocate a buffer
> > > > (e.g. could be one buffer for all tables)
> > > > and pass the address to qemu.
> > > > qemu does all the patching
> > > >
> > > > - further, qemu could do the copy of tables into
> > > > that address directly
> > >
> > > This seems more complex than necessary to me.
> > >
> > > The important task is to get the tables generated in QEMU - I'd focus
> > > on getting the tables generated in QEMU (one table per fw_cfg "file").
> > > Once that is done, the SeaBIOS side can be easily implemented, and we
> > > can add any enhancements on top if we feel it is necessary.
> > >
> > +1. This "copy of tables into that address directly" is just an ad-hoc PV
> > isa DMA device in disguise. Such device was refused when libguestfs
> > asked for it, and they wanted it for much better reason - performance.
> > There is existing mechanism to pass data into firmware. Use it please.
>
> Yes I can code it up using FW_CFG for now.
>
> One issue with QEMU_CFG_FILE_DIR is that it's broken wrt migration,
> unless we pass in very small bits of data which we
> can guarantee never changes across qemu versions.
>
Shouldn't we guaranty that ACPI tables do not change for the same
machine type anyway?
> Off-list, I suggested fixing it and migrating file
> content, but Anthony thinks it's a bad idea.
>
Why is this a bad idea to fix device migration?
> I don't care much.
>
> > --
> > Gleb.
--
Gleb.
