I installed Windows 8 with VFIO_PCI_VGA, vfio-vga-reset branches and "-vga none -device vfio-pci,host=02:00.0,x-vga=on" I received an error:
"qemu-system-x86_64: Attempt to reset PCI bus for VGA support failed (Inappropriate ioctl for device). VGA may not work." on start. Then I installed the catalyst drivers. I started the Valley benchmark and the video card is working in normally 3D mode. After rebooting the host system does not hang, but in guest graphics card was in powersafe mode with 100 mhz GPU and 300 mhz memry clocks. -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1175513 Title: Qemu 1.5-git gpu clock control doesn`t work after guest reboot Status in QEMU: New Bug description: I run qemu from git with such command: qemu-system-x86_64 -nodefaults -m 4096 -smp 8,cores=4,threads=2,sockets=1 -cpu 'kvm64' -device usb-mouse -M q35 -vga qxl -no-hpet -boot once=c,menu=on -device vfio-pci,host=02:00.0,x-vga=on \ -enable-kvm -monitor stdio -chardev socket,path=/tmp/qga.sock,server,nowait,id=qga0 -device virtio-serial -device virtserialport,chardev=qga0,name=org.qemu.guest_agent.0 -net nic,vlan=0,model=e1000 -net tap,ifname=tap0,script=/etc/guest-ifup -usb -device intel-hda -device hda-duplex \ -drive file='/home/<user>/qemu/win7',if=none,id=drive-virtio-disk0,cache=writeback,aio=native,format=qed,discard=on -device virtio-blk-pci,drive=drive-virtio-disk0,id=virtio-disk \ -drive file='/dev/sr0',if=none,id=drive-ide1-0-0,media=cdrom,snapshot=off,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide1-0-0,id=ide1-0-0 \ -spice port=5930,disable-ticketing Before guest (Windows 7) reboot, videocard works in 3D mode with full frequency. But after reboot videocard works in 3D only with powersafe frequency. Then I must reboot host for recover gpu clock control. To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1175513/+subscriptions
