> On Tue, 2013-04-09 at 18:33 -0400, de...@lavabit.com wrote:
>> Here's debug output from qemu, the last lines repeat indefinitely:
>>
>> vfio: vfio_initfn(0000:01:00.0) group 1
>> vfio: region_add 0 - 7fffffff [0x7f605fe00000]
>> vfio: SKIPPING region_add fec00000 - fec00fff
>> vfio: SKIPPING region_add fed00000 - fed003ff
>> vfio: SKIPPING region_add fee00000 - feefffff
>> vfio: SKIPPING region_add fffe0000 - ffffffff
>> vfio: Device 0000:01:00.0 flags: 3, regions: 9, irgs: 3
>> vfio: Device 0000:01:00.0 region 0:
>> vfio: size: 0x10000000, offset: 0x0, flags: 0x7
>> vfio: Device 0000:01:00.0 region 1:
>> vfio: size: 0x0, offset: 0x10000000000, flags: 0x0
>> vfio: Device 0000:01:00.0 region 2:
>> vfio: size: 0x40000, offset: 0x20000000000, flags: 0x7
>> vfio: Device 0000:01:00.0 region 3:
>> vfio: size: 0x0, offset: 0x30000000000, flags: 0x0
>> vfio: Device 0000:01:00.0 region 4:
>> vfio: size: 0x100, offset: 0x40000000000, flags: 0x3
>> vfio: Device 0000:01:00.0 region 5:
>> vfio: size: 0x0, offset: 0x50000000000, flags: 0x0
>> vfio: Device 0000:01:00.0 ROM:
>> vfio: size: 0x20000, offset: 0x60000000000, flags: 0x1
>> vfio: Device 0000:01:00.0 config:
>> vfio: size: 0x1000, offset: 0x70000000000, flags: 0x3
>> vfio: vfio_load_rom(0000:01:00.0)
>> vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0x4010, 4)
>> vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4, 4) = 0xe000000c
>> vfio: Enabled ATI/AMD quirk 0x4010 for device 0000:01:00.0
>> vfio: Enabled ATI/AMD quirk 0x3c3 for device 0000:01:00.0
> ...
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>> vfio: vfio_vga_read(0x3c3, 1) = 0x0
>
> This is a quirk that I haven't fully figured out yet. ATI/AMD cards use
> VGA register 0x3c3 to read upper byte of the address of the I/O port
> BAR, but sometimes it reads 0. Try the patch below to have it always
> return the virtual BAR address and let me know if it works. Thanks,
>
> Alex
>
> --- a/hw/vfio_pci.c
> +++ b/hw/vfio_pci.c
> @@ -1117,7 +1117,7 @@ static uint64_t vfio_ati_3c3_quirk_read(void
> *opaque,
> uint64_t data = vfio_vga_read(&vdev->vga.region[QEMU_PCI_VGA_IO_HI],
> addr + 0x3, size);
>
> - if (data == quirk->data) {
> + if (1 || data == quirk->data) {
> data = pci_get_byte(pdev->config + PCI_BASE_ADDRESS_4 + 1);
> DPRINTF("%s(0x3c3, 1) = 0x%"PRIx64"\n", __func__, data);
> }
>
>
Although with this patch I get much further, monitor still doesn't sync. I
also see some effects on my host GPU (Intel HD4000). Starting qemu ruins
colors (black turns green, blue turns purple, etc). Though switching to
linux console and back to Xorg fixes it.
Debug output this time is huge with most of the lines being variations of
those below. On line 58515 qemu hangs again, and the last two blocks from
this snip repeat indefinitely:
...
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0x1730, 4)
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4, 4) = 0x1
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0xbfffb808, 4)
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4, 4) = 0x80
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0xbfffbc08, 4)
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4, 4) = 0x200
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0x1730, 4)
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4, 4) = 0x1
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0xbfffbc08, 4)
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4, 4) = 0x200
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0xbfffa008, 4)
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4, 4) = 0x1
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0x1730, 4)
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4, 4) = 0x1
vfio: vfio_vga_write(0x3c4, 0x1, 1)
vfio: vfio_vga_read(0x3c5, 1) = 0x0
vfio: vfio_vga_write(0x3c5, 0x20, 1)
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0xbfffa2d4, 4)
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4, 4) = 0x0
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0x6e74, 4)
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4, 4) = 0x1
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0x6e74, 4)
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x4, 0x1, 4)
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0x6e74, 4)
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4, 4) = 0x1
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0x6e74, 4)
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x4, 0x101, 4)
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0x6e70, 4)
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4, 4) = 0x10410311
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0x6e8c, 4)
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4, 4) = 0x10029
vfio: vfio_vga_read(0x3c3, 1) = 0x0
vfio: vfio_ati_3c3_quirk_read(0x3c3, 1) = 0xc0
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4c, 4) = 0x0
vfio: vfio_bar_write(0000:01:00.0:BAR4+0x0, 0x6e8c, 4)
vfio: vfio_bar_read(0000:01:00.0:BAR4+0x4, 4) = 0x10029
