On Jan 18, 2008, at 2:14 AM, consul wrote:
It broke mingw build with gcc-3.4.2
Does it work if you change the lines I'll comment on below?
gcc -Wall -O2 -g -fno-strict-aliasing -fno-reorder-blocks -fno-
gcse -fno-optimize-sibling-calls
-fno-crossjumping -fno-align-labels -fno-align-jumps -fno-align-
functions
-mpreferred-stack-boundary=2 -fomit-frame-pointer -I. -I.. -I/c/
qemu/target-i386
-I/c/qemu -MMD -MP -DNEED_CPU_H -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64
-D_LARGEFILE_SOURCE
-I/c/qemu/fpu -DHAS_AUDIO -DHAS_AUDIO_CHOICE -I/c/qemu/slirp -c -o
op.o
/c/qemu/target-i386/op.c
c:/qemu/target-i386/ops_mem.h: In function `op_stw_kernel_T1_A0':
../softmmu_header.h:174: error: can't find a register in class
`Q_REGS'
while reloading `asm'
make[1]: *** [op.o] Error 1
make[1]: Leaving directory `/c/qemu/i386-softmmu'
make: *** [subdir-i386-softmmu] Error 2
Alex.
"Alexander Graf" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
Johannes Schindelin wrote:
Hi,
On Thu, 17 Jan 2008, Johannes Schindelin wrote:
It fixed it for me, but only after a "make distclean && ./
configure &&
make". Apparently there are still some dependencies which are not
right.
Spoke too soon... It introduces an extra #endif in target-mips/
exec.h
Right, thanks.
New patch attached.
Alex
--------------------------------------------------------------------------------
Index: qemu/softmmu_header.h
===================================================================
--- qemu.orig/softmmu_header.h
+++ qemu/softmmu_header.h
@@ -189,9 +189,15 @@ static inline void glue(glue(st, SUFFIX)
#else
#error unsupported size
#endif
+#ifdef GCC_BREAKS_T_REGISTER
+ "pushl %%ecx\n"
+#endif
Remove the ifdef and endif.
"pushl %6\n"
"call %7\n"
"popl %%eax\n"
+#ifdef GCC_BREAKS_T_REGISTER
+ "popl %%ecx\n"
+#endif
remove the ifdef and endif.
"jmp 2f\n"
"1:\n"
"addl 8(%%edx), %%eax\n"
@@ -209,14 +215,22 @@ static inline void glue(glue(st, SUFFIX)
: "r" (ptr),
/* NOTE: 'q' would be needed as constraint, but we could not use it
with T1 ! */
+#if DATA_SIZE == 1 || DATA_SIZE == 2
+ "q" (v),
+#else
"r" (v),
+#endif
"i" ((CPU_TLB_SIZE - 1) << CPU_TLB_ENTRY_BITS),
"i" (TARGET_PAGE_BITS - CPU_TLB_ENTRY_BITS),
"i" (TARGET_PAGE_MASK | (DATA_SIZE - 1)),
"m" (*(uint32_t *)offsetof(CPUState,
tlb_table[CPU_MMU_INDEX][0].addr_write)),
"i" (CPU_MMU_INDEX),
"m" (*(uint8_t *)&glue(glue(__st, SUFFIX),
MMUSUFFIX))
+#ifdef GCC_BREAKS_T_REGISTER
+ : "%eax", "%edx", "memory", "cc");
+#else
: "%eax", "%ecx", "%edx", "memory", "cc");
+#endif
remove the ifdef, else, the line after else and endif.
}
#else
Index: qemu/target-alpha/cpu.h
===================================================================
--- qemu.orig/target-alpha/cpu.h
+++ qemu/target-alpha/cpu.h
@@ -275,6 +275,8 @@ struct CPUAlphaState {
* used to emulate 64 bits target on 32 bits hosts
*/
target_ulong t0, t1, t2;
+#elif defined(GCC_BREAKS_T_REGISTER)
+ target_ulong t2;
#endif
/* */
double ft0, ft1, ft2;
Index: qemu/target-alpha/exec.h
===================================================================
--- qemu.orig/target-alpha/exec.h
+++ qemu/target-alpha/exec.h
@@ -36,6 +36,12 @@ register struct CPUAlphaState *env asm(A
#define T1 (env->t1)
#define T2 (env->t2)
+#elif defined(GCC_BREAKS_T_REGISTER)
+
+register uint64_t T0 asm(AREG1);
+register uint64_t T1 asm(AREG2);
+#define T2 (env->t2)
+
#else
register uint64_t T0 asm(AREG1);
Index: qemu/target-arm/cpu.h
===================================================================
--- qemu.orig/target-arm/cpu.h
+++ qemu/target-arm/cpu.h
@@ -66,6 +66,9 @@ typedef uint32_t ARMReadCPFunc(void *opa
*/
typedef struct CPUARMState {
+#if defined(GCC_BREAKS_T_REGISTER)
+ uint32_t t2;
+#endif
/* Regs for current mode. */
uint32_t regs[16];
/* Frequently accessed CPSR bits are stored separately for
efficiently.
Index: qemu/target-arm/exec.h
===================================================================
--- qemu.orig/target-arm/exec.h
+++ qemu/target-arm/exec.h
@@ -23,7 +23,12 @@
register struct CPUARMState *env asm(AREG0);
register uint32_t T0 asm(AREG1);
register uint32_t T1 asm(AREG2);
+#if defined(GCC_BREAKS_T_REGISTER)
+#define T2 (env->t2)
+#else
register uint32_t T2 asm(AREG3);
+#endif
+
/* TODO: Put these in FP regs on targets that have such things. */
/* It is ok for FT0s and FT0d to overlap. Likewise FT1s and FT1d.
*/
Index: qemu/target-i386/cpu.h
===================================================================
--- qemu.orig/target-i386/cpu.h
+++ qemu/target-i386/cpu.h
@@ -470,6 +470,8 @@ typedef struct CPUX86State {
#if TARGET_LONG_BITS > HOST_LONG_BITS
/* temporaries if we cannot store them in host registers */
target_ulong t0, t1, t2;
+#elif defined(GCC_BREAKS_T_REGISTER)
+ target_ulong t1;
#endif
/* standard registers */
Index: qemu/target-i386/exec.h
===================================================================
--- qemu.orig/target-i386/exec.h
+++ qemu/target-i386/exec.h
@@ -39,6 +39,12 @@ register struct CPUX86State *env asm(ARE
#define T1 (env->t1)
#define T2 (env->t2)
+#elif defined(GCC_BREAKS_T_REGISTER)
+
+register target_ulong T0 asm(AREG1);
+#define T1 (env->t1)
+register target_ulong T2 asm(AREG3);
+
#else
/* XXX: use unsigned long instead of target_ulong - better code will
Index: qemu/target-mips/cpu.h
===================================================================
--- qemu.orig/target-mips/cpu.h
+++ qemu/target-mips/cpu.h
@@ -149,6 +149,8 @@ struct CPUMIPSState {
target_ulong t0;
target_ulong t1;
target_ulong t2;
+#elif defined(GCC_BREAKS_T_REGISTER)
+ target_ulong t2;
#endif
target_ulong HI[MIPS_DSP_ACC][MIPS_TC_MAX];
target_ulong LO[MIPS_DSP_ACC][MIPS_TC_MAX];
Index: qemu/target-mips/exec.h
===================================================================
--- qemu.orig/target-mips/exec.h
+++ qemu/target-mips/exec.h
@@ -14,6 +14,10 @@ register struct CPUMIPSState *env asm(AR
#define T0 (env->t0)
#define T1 (env->t1)
#define T2 (env->t2)
+#elif defined(GCC_BREAKS_T_REGISTER)
+register target_ulong T0 asm(AREG1);
+register target_ulong T1 asm(AREG2);
+#define T2 (env->t2)
#else
register target_ulong T0 asm(AREG1);
register target_ulong T1 asm(AREG2);
Index: qemu/target-ppc/exec.h
===================================================================
--- qemu.orig/target-ppc/exec.h
+++ qemu/target-ppc/exec.h
@@ -38,10 +38,15 @@ register struct CPUPPCState *env asm(ARE
#define T1 (env->t1)
#define T2 (env->t2)
#define TDX "%016" PRIx64
+#elif defined(GCC_BREAKS_T_REGISTER)
+register unsigned long T0 asm(AREG1);
+register unsigned long T1 asm(AREG2);
+#define T2 (env->t2)
#else
register unsigned long T0 asm(AREG1);
register unsigned long T1 asm(AREG2);
register unsigned long T2 asm(AREG3);
+#endif
#define TDX "%016lx"
#endif
/* We may, sometime, need 64 bits registers on 32 bits targets */
Index: qemu/target-sparc/exec.h
===================================================================
--- qemu.orig/target-sparc/exec.h
+++ qemu/target-sparc/exec.h
@@ -32,9 +32,13 @@ register uint32_t T2 asm(AREG4);
#else
#define REGWPTR env->regwptr
+#if !defined(GCC_BREAKS_T_REGISTER)
register uint32_t T2 asm(AREG3);
-#endif
#define reg_T2
+#else
+#define T2 (env->t2)
+#endif
+#endif
#endif
#define FT0 (env->ft0)
Index: qemu/configure
===================================================================
--- qemu.orig/configure
+++ qemu/configure
@@ -806,6 +806,12 @@ echo "AIOLIBS=$AIOLIBS" >> $config_mak
if test "$cpu" = "i386" ; then
echo "ARCH=i386" >> $config_mak
echo "#define HOST_I386 1" >> $config_h
+
+ # add check for gcc4 breakage
+ echo "#if (__GNUC__ > 3)" >> $config_h
+ echo "#define GCC_BREAKS_T_REGISTER" >> $config_h
+ echo "#endif" >> $config_h
+
elif test "$cpu" = "x86_64" ; then
echo "ARCH=x86_64" >> $config_mak
echo "#define HOST_X86_64 1" >> $config_h
