On 11/18/07, Robert Reif <[EMAIL PROTECTED]> wrote: > Blue Swirl wrote: > > >On 11/16/07, Robert Reif <[EMAIL PROTECTED]> wrote: > > > > > >>>This patch fixes the word order for 64 bit reads of the mxcc registers. > >>> > >>> > > > >Otherwise everything seems OK, but it breaks NetBSD version 3 on SS10: > >clock0 at obio0 slot 0 offset 0x200000: mk48t08 > >timer0 at obio0 slot 0 offset 0x300000data fault: pc=0xf0111a0c > >addr=0x0 sfsr=126<PERR=0,LVL=1,AT=1,FT=1,FAV,OW> > >panic: kernel fault > >halted > > > >halt, power off > > > >Without the patch I get: > >clock0 at obio0 slot 0 offset 0x200000: mk48t08 > >timer0 at obio0 slot 0 offset 0x300000: delay constant 99 > >zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6 > >zstty0 at zs0 channel 0 (console i/o) > >zstty1 at zs0 channel 1 > >scsi-disk: Unsupported command length, command 79 > > > > > > > > > > > This is a classic case of two wrongs make a right. OpenBios need to be > fixed to set mbus module id to start at 8, not 0 for mbus based machines.
Turbosparc manual says that the module id is hardwired to 0x8, so would it be OK if mid was i + 8 for all machines?
