Hi,
While testing qemu-master I've encountered 2 problems caused by the ehci changes
made since 1.1:
1) Newly plugged in devices don't get recognized by the guest
This seems to be a case of no interrupt getting generated while it should,
doing lsusb in a linux
guest makes the device show up (after the lsusb, so its there in a second lsusb
run)
2) I'm hitting:
qemu-system-x86_64: /home/hans/projects/qemu/hw/usb/hcd-ehci.c:2075:
ehci_state_executing: Assertion `p->qtdaddr == q->qtdaddr' failed.
When trying to redirect a microsoft lifecam, since this is a device with
multiple interfaces
(both uvc and usb-audio) I think it may be a case of multiple control requests
getting submitted at the same time,
but that is just a wild guess.
Some gdb output:
(gdb) fr 4
#4 0x00005555556c33ce in ehci_state_executing (q=0x5555566c9590)
at /home/hans/projects/qemu/hw/usb/hcd-ehci.c:2075
2075 assert(p->qtdaddr == q->qtdaddr);
(gdb) p q
$1 = (EHCIQueue *) 0x5555566c9590
(gdb) p *q
$2 = {ehci = 0x5555566e58b0, next = {tqe_next = 0x5555566c23e0, tqe_prev =
0x5555566e7188}, seen = 1, ts = 500707440673, async = 1, revalidate = 0,
qh = {next = 915959810, epchar = 1077960706, epcap = 1073741824,
current_qtd = 915964192, next_qtd = 915964384, altnext_qtd = 1, token =
2147483720, bufptr = {865509240, 0, 0, 0, 0}}, qhaddr = 915959906,
qtdaddr = 915964192, dev = 0x555556710e10, packets = {tqh_first =
0x55555676a440, tqh_last = 0x55555676aca8}}
(gdb) p *p
$3 = {queue = 0x5555566c9590, next = {tqe_next = 0x55555676aca0, tqe_prev =
0x5555566c9600}, qtd = {next = 915964288, altnext = 1, token = 2147683712,
bufptr = {865509232, 0, 0, 0, 0}}, qtdaddr = 915964480, packet = {pid =
105, ep = 0x555556711f08, iov = {iov = 0x55555676a960, niov = 1, nalloc =
1, size = 3}, parameter = 0, result = -3, state = USB_PACKET_COMPLETE,
queue = {tqe_next = 0x55555676ace0, tqe_prev = 0x555556711f20}}, sgl = {
sg = 0x555556769940, nsg = 1, nalloc = 5, size = 3, dma = 0x0}, pid = 105,
tbytes = 3, async = EHCI_ASYNC_FINISHED, usb_status = -3}
Let me know what else you need to debug this.
Regards,
Hans
