In article <[EMAIL PROTECTED]>
you write:
>On 24/07/07, Juergen Lock <[EMAIL PROTECTED]> wrote:
>> Hi!
>>
>> I just played with this a bit and although I got the stuff at
>> http://pokylinux.org/releases/clyde-2.0/
>> somewhat working (tried the akita ones going after
>> http://butterfeet.org/?m=200705
>> , I seem to miss -showcursor and consequently got no cursor
>> which made navigating the gui a `little' difficult... :) - anyway
(-show-cursor worked, thx!)
>> I couldnt get the sharp rom kernel to boot further than showing
>> the splash screen with a blinking cursor (i tried terrier and akita ones,
>
>That would suggest that it's hanging somewhere in the userspace (but
>not necessarily).
Hmm maybe, after a while the cursor stops blinking...
> Have you tried booting with no init scripts? (e.g.
>init=/bin/sh)
I was under the impression that -append doesnt work, is this wrong?
Also /proc/cmdline on the zaurus is
console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:[EMAIL
PROTECTED](smf),[EMAIL PROTECTED](root),-(home) jffs2_orphaned_inodes=delete
EQUIPMENT=5 LOGOLANG=1 DEFYEAR=2007 LOGO=1 LAUNCH=q
and even when I do pass that with -append to qemu I still dont get
anything on the serial console. So maybe the problem is just missing
kernel commandline... Can -append be fixed?
> Otherwise do you have sources for the kernel you're
>using so that you could enable initcalls debugging in its config?
Kernel source can apparently be downloaded here,
http://support.ezaurus.com/developer/source/source_dl.asp
(page is in japanese, but you can look at the links and filenames),
but to build it i guess I'd have to update my linux installation first
and then figure out how to cross-build a kernel...
>
>> they both seem to hang somewhere regardless of a proper -mtdblock passed
>> or even none, at least info registers in the monitor showed no changes.)
>
>When you issue "info registers" more than likely the kernel is always
>in the idle loop saving the battery power, so it will almost always
>show the same values, even if there are actually processes running and
>doing some work.
Could be, but can `info jit' also show no change then? (qemu is still
using all the cpu time it can get.)
>
>> Anyone know which roms work? atm I want to play with debian for the
>> existing sharp rom that i have on the zaurus (a c3200), so a rom thats
>> at least similar to sharp would be preferable...
>
>Unfortunately I have no physical zaurus, so no access to any Sharp rom
>because they are copyrighted.
Hmm they are also available e.g. here (english version, clink on
model below `Downloads' in the left column, then look for `NAND-Backup'):
http://trisoft.de/downloads.htm
(see below for the hack I used to convert the .dbk files to a raw image)
There's also cacko,
http://my-zaurus.narod.ru/cacko.html
which may be similar enough to the sharp rom, but I haven't yet tried it.
> Installing debian however should not
>depend on what rom you use, afterall debian is supposed to replace the
>contents.
Well I dont want to replace the contents, I want to run debian in
addition to the sharp stuff in a chroot :) See e.g. here,
http://wiki.debian.org/PocketWorkstation
and under `Installing Debian/PocketWorkstation' here:
http://www.users.on.net/~hluc/myZaurus/jumbo/xqtjumbo.html
(these instructions and packages are a bit dated and not directly for
c3200 which is one of the reasons i'd like to test/prepare things
using qemu.)
And now the .dbk extraction hack, adapted from the mountjffs script
in this thread,
http://www.oesf.org/forums/index.php?showtopic=22034
(I didn't really clean up all the comments; run e.g. as
./dumpjffs.sh c3200all all SYSTC320.DBK
, assumes 128MB size. If you want to extract parts i.e. `rom' or `root'
or `user' instead of `all' you may need to adjust ROOTFS and/or ROMFS
below too.)
-----------cut-here---------
#!/bin/bash
#######################################################################
#
# Copyright (C) 2007 SCL Internet
# www.scl.co.uk
#
# Original Author: John Sutton [EMAIL PROTECTED]
#
# $Id: dumpjffs$
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
#######################################################################
#
# dumpjffs : a shell script for extracting the jffs filesystems which
# are contained in the 128Mb NAND flash backup image produced
# by a Zaurus SL-C1000.
#
#######################################################################
: <<EOC
The primitive block in a SYSTC100.DBK flash file is 16 bytes long, we call
this a pblock.
The filesystems contained in the flash file are split up into a number of
datablocks each of which is 8192 pblocks = 128kb long. Each datablock is
followed by a checkblock (which presumably contains some kind of checksums,
of unknown type), each checkblock is 256 pblocks.
A repeatblock is made up of a 1 pblock header followed by a datablock and
then a checkblock, i.e., a total of 1+8192+256 pblocks per repeatblock.
The flash file as a whole consists of a 1 pblock header followed by 1024
repeatblocks, i.e., (1+1024*(1+8192+256))*16 = 138428432 bytes total.
The flash file contains 3 filesystems in this order: rom, root, user. The
rom fs contains the diagnostics menu etc and is NOT a jffs fs at all. We only
need to know how long it is so that we can skip over it to find the root fs.
Ditto, if we know the size of the rom and root fs's, we can skip over both to
find the user fs. So, we need to specify the size, in 128k blocks, of the
rom and root fs's and then the whole structure is specified.
YOU MAY NEED TO ADJUST THE TWO PARAMETERS BELOW.
Run the indicated commands on the zaurus to find your values. It is unlikely
that ROMFS needs changing - I think this is fixed in the firmware at 7Mb,
i.e., 7 x 8 = 56 128kb blocks. ROOTFS on the other hand will depend on how
you have divided up the remaining 121Mb between the root and user partitions.
EOC
ROMFS=56 # Use 'wc -c </dev/mtdblock1' and divide result by 128x1024.
ROOTFS=464 # Use 'df' to find the 1k-blocks for /dev/root and divide by
128.
# START
progname=`basename $0`
function usage {
[ $# -gt 0 ] && echo "$@" >&2
echo "usage: $progname outfile {{rom|root|user|all} flashfilename}" >&2
exit 1
}
# Check the arguments.
[ $# = 2 -o $# = 3 ] || usage
[ -e "$1" ] && usage "file exists: $1"
#MP=$1
OF=$1
[ root = "$2" -o user = "$2" -o rom = "$2" -o all = "$2" ] || \
usage "Invalid filesystem identifier or
operation: $2"
FS=$2
# We don't actually need the flash file if umount is specified, but if the
# user has given a 3rd arg we'll check it anyway.
[ $# = 3 ] && {
[ -r "$3" ] || usage "Can't open flash file: $3"
FF="$3"
}
# Unmount and unload the 5 modules.
#umount $MP 2>/dev/null
#modprobe -r mtdblock mtdchar mtdram jffs2 mtdcore || exit 2
# If umount specified, we are finished.
[ $FS = umount ] && exit 0
# Define the number of pblocks in each element of a repeatblock.
datablock=8192
checkblock=256
# Calculate the number of repeatblocks for the specified fs.
[ $FS = root ] && numrepeats=$ROOTFS || numrepeats=$((1024-ROMFS-ROOTFS))
[ $FS = rom ] && numrepeats=$ROMFS
[ $FS = all ] && numrepeats=1024
# Calculate the number of repeatblocks which come before this fs.
[ $FS = root ] && offset=$ROMFS || offset=$((ROMFS+ROOTFS))
[ $FS = rom ] && offset=0
[ $FS = all ] && offset=0
# Load up the 5 modules.
#modprobe mtdcore
#modprobe jffs2
#modprobe mtdram total_size=$((numrepeats*128))
#modprobe mtdchar
#modprobe mtdblock
# Find the device files
#while true
#do
# CDEV=/dev/mtd0; [ -c $CDEV ] && break
# CDEV=/dev/mtd/0; [ -c $CDEV ] && break
# echo "Can't find mtd character device" >&2; exit 2
#done
#while true
#do
# BDEV=/dev/mtdblock0; [ -b $BDEV ] && break
# BDEV=/dev/mtdblock/0; [ -b $BDEV ] && break
# echo "Can't find mtd block device" >&2; exit 2
#done
# Set up the pointer variable (in pblocks) for the loop.
in=$(( 1+offset*(1+datablock+checkblock) ))
# One iteration per repeatblock.
for (( i = 0; i < numrepeats; i++ ))
do
# Skip over the repeatblock header.
(( in += 1 ))
# Write out the datablock.
dd bs=16 skip=$in count=$datablock if="$FF"
# Increment the pointer for the next repeatblock.
(( in += datablock+checkblock ))
done 2>&1 >$OF | grep -v "^$datablock+0 records \(in\|out\)$" >&2
# Mount it readonly - not much point in allowing it to be modified since
# we don't know how to calculate the checkblocks which would be needed to
# construct a new flash file.
#mount -t jffs2 -r $BDEV $MP || echo "Maybe you need to adjust ROMFS or ROOTFS?"
