When using a CXL Type 3 device together with a virtio 9p device in QEMU on a
physical server, the 9p device fails to initialize properly. The kernel reports
the following error:
virtio: device uses modern interface but does not have VIRTIO_F_VERSION_1
9pnet_virtio virtio0: probe with driver 9pnet_virtio failed with error -22
Further investigation revealed that the 64-bit BAR space assigned to the 9pnet
device was overlapped by the memory window allocated for the CXL devices. As a
result, the kernel could not correctly access the BAR region, causing the
virtio device to malfunction.
An excerpt from /proc/iomem shows:
480010000-cffffffff : CXL Window 0
480010000-4bfffffff : PCI Bus 0000:00
4c0000000-4c01fffff : PCI Bus 0000:0c
4c0000000-4c01fffff : PCI Bus 0000:0d
4c0200000-cffffffff : PCI Bus 0000:00
4c0200000-4c0203fff : 0000:00:03.0
4c0200000-4c0203fff : virtio-pci-modern
To address this issue, this patch adds the reserved memory end calculation
for cxl devices to reserve sufficient address space and ensure that CXL memory
windows are allocated beyond all PCI 64-bit BARs. This prevents overlap with
64-bit BARs regions such as those used by virtio or other pcie devices,
resolving the conflict.
QEMU Build Configuration:
./configure --prefix=/home/work/qemu_master/build/ \
--target-list=x86_64-softmmu \
--enable-kvm \
--enable-virtfs
QEMU Boot Command:
sudo /home/work/qemu_master/qemu/build/qemu-system-x86_64 \
-nographic -machine q35,cxl=on -enable-kvm -m 16G -smp 8 \
-hda /home/work/gp_qemu/rootfs.img \
-virtfs
local,path=/home/work/gp_qemu/share,mount_tag=host0,security_model=passthrough,id=host0
\
-kernel /home/work/linux_output/arch/x86/boot/bzImage \
--append "console=ttyS0 crashkernel=256M root=/dev/sda rootfstype=ext4
rw loglevel=8" \
-object memory-backend-ram,id=vmem0,share=on,size=4096M \
-device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
-device cxl-rp,port=0,bus=cxl.1,id=root_port13,chassis=0,slot=2 \
-device
cxl-type3,bus=root_port13,volatile-memdev=vmem0,id=cxl-vmem0,sn=0x123456789 \
-M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G
Fixes: 03b39fcf64bc ("hw/cxl: Make the CXL fixed memory window setup a machine
parameter")
Signed-off-by: peng guo <engguop...@buaa.edu.cn>
---
v2 -> v3: Adjust the code to match QEMU's coding style guidelines
v1 -> v2: Make the patch clearer and add fixes
hw/i386/pc.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index 2f58e73d3347..dd6f6e721548 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -834,6 +834,7 @@ void pc_memory_init(PCMachineState *pcms,
hwaddr maxphysaddr, maxusedaddr;
hwaddr cxl_base, cxl_resv_end = 0;
X86CPU *cpu = X86_CPU(first_cpu);
+ uint64_t res_mem_end;
assert(machine->ram_size == x86ms->below_4g_mem_size +
x86ms->above_4g_mem_size);
@@ -975,16 +976,17 @@ void pc_memory_init(PCMachineState *pcms,
rom_set_fw(fw_cfg);
- if (machine->device_memory) {
- uint64_t *val = g_malloc(sizeof(*val));
- uint64_t res_mem_end;
+ if (pcms->cxl_devices_state.is_enabled) {
+ res_mem_end = cxl_resv_end;
+ } else if (machine->device_memory) {
+ res_mem_end = machine->device_memory->base
+ + memory_region_size(&machine->device_memory->mr);
+ } else {
+ res_mem_end = 0;
+ }
- if (pcms->cxl_devices_state.is_enabled) {
- res_mem_end = cxl_resv_end;
- } else {
- res_mem_end = machine->device_memory->base
- + memory_region_size(&machine->device_memory->mr);
- }
+ if (res_mem_end) {
+ uint64_t *val = g_malloc(sizeof(*val));
*val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB));
fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val));
}
--
2.43.0
