Signed-off-by: John Snow <js...@redhat.com> --- qapi/migration.json | 62 ++++++++++++++++++++++----------------------- 1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/qapi/migration.json b/qapi/migration.json index d7c5047462e..fec6479a23e 100644 --- a/qapi/migration.json +++ b/qapi/migration.json @@ -193,14 +193,14 @@ # # Information about current migration process. # -# @status: @MigrationStatus describing the current migration status. +# @status: `MigrationStatus` describing the current migration status. # If this field is not returned, no migration process has been # initiated # -# @ram: @MigrationStats containing detailed migration status, only +# @ram: `MigrationStats` containing detailed migration status, only # returned if status is 'active' or 'completed'(since 1.2) # -# @xbzrle-cache: @XBZRLECacheStats containing detailed XBZRLE +# @xbzrle-cache: `XBZRLECacheStats` containing detailed XBZRLE # migration statistics, only returned if XBZRLE feature is on and # status is 'active' or 'completed' (since 1.2) # @@ -239,7 +239,7 @@ # @socket-address: Only used for tcp, to know what the real port is # (Since 4.0) # -# @vfio: @VfioStats containing detailed VFIO devices migration +# @vfio: `VfioStats` containing detailed VFIO devices migration # statistics, only returned if VFIO device is present, migration # is supported by all VFIO devices and status is 'active' or # 'completed' (since 5.2) @@ -250,7 +250,7 @@ # # @dirty-limit-throttle-time-per-round: Maximum throttle time (in # microseconds) of virtual CPUs each dirty ring full round, which -# shows how MigrationCapability dirty-limit affects the guest +# shows how `MigrationCapability` dirty-limit affects the guest # during live migration. (Since 8.1) # # @dirty-limit-ring-full-time: Estimated average dirty ring full time @@ -587,7 +587,7 @@ # # @normal: the original form of migration. (since 8.2) # -# @cpr-reboot: The migrate command stops the VM and saves state to the +# @cpr-reboot: The `migrate` command stops the VM and saves state to the # URI. After quitting QEMU, the user resumes by running QEMU # -incoming. # @@ -635,7 +635,7 @@ # # New QEMU reads the CPR channel before opening a monitor, hence # the CPR channel cannot be specified in the list of channels for -# a migrate-incoming command. It may only be specified on the +# a `migrate-incoming` command. It may only be specified on the # command line. # # The main channel address cannot be a file type, and for an @@ -646,10 +646,10 @@ # memory-backend-epc is not supported. The VM must be started # with the '-machine aux-ram-share=on' option. # -# When using -incoming defer, you must issue the migrate command +# When using -incoming defer, you must issue the `migrate` command # to old QEMU before issuing any monitor commands to new QEMU. # However, new QEMU does not open and read the migration stream -# until you issue the migrate incoming command. +# until you issue the `migrate` incoming command. # # (since 10.0) ## @@ -871,11 +871,11 @@ # @vcpu-dirty-limit: Dirtyrate limit (MB/s) during live migration. # Defaults to 1. (Since 8.1) # -# @mode: Migration mode. See description in @MigMode. Default is +# @mode: Migration mode. See description in `MigMode`. Default is # 'normal'. (Since 8.2) # # @zero-page-detection: Whether and how to detect zero pages. -# See description in @ZeroPageDetection. Default is 'multifd'. +# See description in `ZeroPageDetection`. Default is 'multifd'. # (since 9.0) # # @direct-io: Open migration files with O_DIRECT when possible. This @@ -1052,11 +1052,11 @@ # @vcpu-dirty-limit: Dirtyrate limit (MB/s) during live migration. # Defaults to 1. (Since 8.1) # -# @mode: Migration mode. See description in @MigMode. Default is +# @mode: Migration mode. See description in `MigMode`. Default is # 'normal'. (Since 8.2) # # @zero-page-detection: Whether and how to detect zero pages. -# See description in @ZeroPageDetection. Default is 'multifd'. +# See description in `ZeroPageDetection`. Default is 'multifd'. # (since 9.0) # # @direct-io: Open migration files with O_DIRECT when possible. This @@ -1068,8 +1068,8 @@ # @unstable: Members @x-checkpoint-delay and # @x-vcpu-dirty-limit-period are experimental. # -# TODO: either fuse back into MigrationParameters, or make -# MigrationParameters members mandatory +# TODO: either fuse back into `MigrationParameters`, or make +# `MigrationParameters` members mandatory # # Since: 2.4 ## @@ -1262,11 +1262,11 @@ # @vcpu-dirty-limit: Dirtyrate limit (MB/s) during live migration. # Defaults to 1. (Since 8.1) # -# @mode: Migration mode. See description in @MigMode. Default is +# @mode: Migration mode. See description in `MigMode`. Default is # 'normal'. (Since 8.2) # # @zero-page-detection: Whether and how to detect zero pages. -# See description in @ZeroPageDetection. Default is 'multifd'. +# See description in `ZeroPageDetection`. Default is 'multifd'. # (since 9.0) # # @direct-io: Open migration files with O_DIRECT when possible. This @@ -1356,7 +1356,7 @@ # # Emitted when a migration event happens # -# @status: @MigrationStatus describing the current migration status. +# @status: `MigrationStatus` describing the current migration status. # # Since: 2.4 # @@ -1477,8 +1477,8 @@ # The reason for a COLO exit. # # @none: failover has never happened. This state does not occur in -# the COLO_EXIT event, and is only visible in the result of -# query-colo-status. +# the `COLO_EXIT` event, and is only visible in the result of +# `query-colo-status`. # # @request: COLO exit is due to an external request. # @@ -1733,8 +1733,8 @@ # list connected to a destination interface endpoint. # # @exit-on-error: Exit on incoming migration failure. Default true. -# When set to false, the failure triggers a MIGRATION event, and -# error details could be retrieved with query-migrate. +# When set to false, the failure triggers a :qapi:event:`MIGRATION` +# event, and error details could be retrieved with `query-migrate`. # (since 9.1) # # Since: 2.3 @@ -1746,7 +1746,7 @@ # already exposed above libvirt. # # 2. QEMU must be started with -incoming defer to allow -# migrate-incoming to be used. +# `migrate-incoming` to be used. # # 3. The uri format is the same as for -incoming # @@ -1799,7 +1799,7 @@ # devices of the VM are not saved by this command. # # @filename: the file to save the state of the devices to as binary -# data. See xen-save-devices-state.txt for a description of the +# data. See `xen-save-devices-state`.txt for a description of the # binary format. # # @live: Optional argument to ask QEMU to treat this command as part @@ -1840,7 +1840,7 @@ # devices of the VM are not loaded by this command. # # @filename: the file to load the state of the devices from as binary -# data. See xen-save-devices-state.txt for a description of the +# data. See `xen-save-devices-state`.txt for a description of the # binary format. # # Since: 2.7 @@ -2049,7 +2049,7 @@ # @DirtyRateMeasureMode: # # Method used to measure dirty page rate. Differences between -# available methods are explained in @calc-dirty-rate. +# available methods are explained in `calc-dirty-rate`. # # @page-sampling: use page sampling # @@ -2117,7 +2117,7 @@ # @calc-dirty-rate: # # Start measuring dirty page rate of the VM. Results can be retrieved -# with @query-dirty-rate after measurements are completed. +# with `query-dirty-rate` after measurements are completed. # # Dirty page rate is the number of pages changed in a given time # period expressed in MiB/s. The following methods of calculation are @@ -2190,7 +2190,7 @@ ## # @query-dirty-rate: # -# Query results of the most recent invocation of @calc-dirty-rate. +# Query results of the most recent invocation of `calc-dirty-rate`. # # @calc-time-unit: time unit in which to report calculation time. # By default it is reported in seconds. (Since 8.2) @@ -2240,7 +2240,7 @@ # # Requires KVM with accelerator property "dirty-ring-size" set. A # virtual CPU's dirty page rate is a measure of its memory load. To -# observe dirty page rates, use @calc-dirty-rate. +# observe dirty page rates, use `calc-dirty-rate`. # # @cpu-index: index of a virtual CPU, default is all. # @@ -2265,7 +2265,7 @@ # Cancel the upper limit of dirty page rate for virtual CPUs. # # Cancel the dirty page limit for the vCPU which has been set with -# set-vcpu-dirty-limit command. Note that this command requires +# `set-vcpu-dirty-limit` command. Note that this command requires # support from dirty ring, same as the "set-vcpu-dirty-limit". # # @cpu-index: index of a virtual CPU, default is all. @@ -2423,7 +2423,7 @@ # time it takes to load the snapshot. # # It is strongly recommended that @devices contain all writable block -# device nodes that can have changed since the original @snapshot-save +# device nodes that can have changed since the original `snapshot-save` # command execution. # # .. qmp-example:: -- 2.48.1
