Hi Eric,

On 5/14/25 14:00, Eric Auger wrote:
GPEX acpi_dsdt_add_pci_osc() does basically the same as
build_q35_osc_method().

Rename build_q35_osc_method() into build_pci_host_bridge_osc_method()
and move it into hw/acpi/aml-build.c. In a subsequent patch we will
use this later in place of acpi_dsdt_add_pci_osc().

Signed-off-by: Eric Auger <eric.au...@redhat.com>

Reviewed-by: Gustavo Romero <gustavo.rom...@linaro.org>


Cheers,
Gustavo

---
  include/hw/acpi/aml-build.h |  2 ++
  hw/acpi/aml-build.c         | 50 ++++++++++++++++++++++++++++++++++
  hw/i386/acpi-build.c        | 54 ++-----------------------------------
  3 files changed, 54 insertions(+), 52 deletions(-)

diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
index c18f681342..177d60b414 100644
--- a/include/hw/acpi/aml-build.h
+++ b/include/hw/acpi/aml-build.h
@@ -508,4 +508,6 @@ void build_tpm2(GArray *table_data, BIOSLinker *linker, 
GArray *tcpalog,
  void build_spcr(GArray *table_data, BIOSLinker *linker,
                  const AcpiSpcrData *f, const uint8_t rev,
                  const char *oem_id, const char *oem_table_id, const char 
*name);
+
+Aml *build_pci_host_bridge_osc_method(bool enable_native_pcie_hotplug);
  #endif
diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
index f8f93a9f66..ba1dfe0b52 100644
--- a/hw/acpi/aml-build.c
+++ b/hw/acpi/aml-build.c
@@ -2614,3 +2614,53 @@ Aml *aml_i2c_serial_bus_device(uint16_t address, const 
char *resource_source)
return var;
  }
+
+Aml *build_pci_host_bridge_osc_method(bool enable_native_pcie_hotplug)
+{
+    Aml *if_ctx;
+    Aml *if_ctx2;
+    Aml *else_ctx;
+    Aml *method;
+    Aml *a_cwd1 = aml_name("CDW1");
+    Aml *a_ctrl = aml_local(0);
+
+    method = aml_method("_OSC", 4, AML_NOTSERIALIZED);
+    aml_append(method, aml_create_dword_field(aml_arg(3), aml_int(0), "CDW1"));
+
+    if_ctx = aml_if(aml_equal(
+        aml_arg(0), aml_touuid("33DB4D5B-1FF7-401C-9657-7441C03DD766")));
+    aml_append(if_ctx, aml_create_dword_field(aml_arg(3), aml_int(4), "CDW2"));
+    aml_append(if_ctx, aml_create_dword_field(aml_arg(3), aml_int(8), "CDW3"));
+
+    aml_append(if_ctx, aml_store(aml_name("CDW3"), a_ctrl));
+
+    /*
+     * Always allow native PME, AER (no dependencies)
+     * Allow SHPC (PCI bridges can have SHPC controller)
+     * Disable PCIe Native Hot-plug if ACPI PCI Hot-plug is enabled.
+     */
+    aml_append(if_ctx, aml_and(a_ctrl,
+        aml_int(0x1E | (enable_native_pcie_hotplug ? 0x1 : 0x0)), a_ctrl));
+
+    if_ctx2 = aml_if(aml_lnot(aml_equal(aml_arg(1), aml_int(1))));
+    /* Unknown revision */
+    aml_append(if_ctx2, aml_or(a_cwd1, aml_int(0x08), a_cwd1));
+    aml_append(if_ctx, if_ctx2);
+
+    if_ctx2 = aml_if(aml_lnot(aml_equal(aml_name("CDW3"), a_ctrl)));
+    /* Capabilities bits were masked */
+    aml_append(if_ctx2, aml_or(a_cwd1, aml_int(0x10), a_cwd1));
+    aml_append(if_ctx, if_ctx2);
+
+    /* Update DWORD3 in the buffer */
+    aml_append(if_ctx, aml_store(a_ctrl, aml_name("CDW3")));
+    aml_append(method, if_ctx);
+
+    else_ctx = aml_else();
+    /* Unrecognized UUID */
+    aml_append(else_ctx, aml_or(a_cwd1, aml_int(4), a_cwd1));
+    aml_append(method, else_ctx);
+
+    aml_append(method, aml_return(aml_arg(3)));
+    return method;
+}
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index b92765fbd9..41fde88b22 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -1111,56 +1111,6 @@ static Aml *build_q35_dram_controller(const AcpiMcfgInfo 
*mcfg)
      return dev;
  }
-static Aml *build_q35_osc_method(bool enable_native_pcie_hotplug)
-{
-    Aml *if_ctx;
-    Aml *if_ctx2;
-    Aml *else_ctx;
-    Aml *method;
-    Aml *a_cwd1 = aml_name("CDW1");
-    Aml *a_ctrl = aml_local(0);
-
-    method = aml_method("_OSC", 4, AML_NOTSERIALIZED);
-    aml_append(method, aml_create_dword_field(aml_arg(3), aml_int(0), "CDW1"));
-
-    if_ctx = aml_if(aml_equal(
-        aml_arg(0), aml_touuid("33DB4D5B-1FF7-401C-9657-7441C03DD766")));
-    aml_append(if_ctx, aml_create_dword_field(aml_arg(3), aml_int(4), "CDW2"));
-    aml_append(if_ctx, aml_create_dword_field(aml_arg(3), aml_int(8), "CDW3"));
-
-    aml_append(if_ctx, aml_store(aml_name("CDW3"), a_ctrl));
-
-    /*
-     * Always allow native PME, AER (no dependencies)
-     * Allow SHPC (PCI bridges can have SHPC controller)
-     * Disable PCIe Native Hot-plug if ACPI PCI Hot-plug is enabled.
-     */
-    aml_append(if_ctx, aml_and(a_ctrl,
-        aml_int(0x1E | (enable_native_pcie_hotplug ? 0x1 : 0x0)), a_ctrl));
-
-    if_ctx2 = aml_if(aml_lnot(aml_equal(aml_arg(1), aml_int(1))));
-    /* Unknown revision */
-    aml_append(if_ctx2, aml_or(a_cwd1, aml_int(0x08), a_cwd1));
-    aml_append(if_ctx, if_ctx2);
-
-    if_ctx2 = aml_if(aml_lnot(aml_equal(aml_name("CDW3"), a_ctrl)));
-    /* Capabilities bits were masked */
-    aml_append(if_ctx2, aml_or(a_cwd1, aml_int(0x10), a_cwd1));
-    aml_append(if_ctx, if_ctx2);
-
-    /* Update DWORD3 in the buffer */
-    aml_append(if_ctx, aml_store(a_ctrl, aml_name("CDW3")));
-    aml_append(method, if_ctx);
-
-    else_ctx = aml_else();
-    /* Unrecognized UUID */
-    aml_append(else_ctx, aml_or(a_cwd1, aml_int(4), a_cwd1));
-    aml_append(method, else_ctx);
-
-    aml_append(method, aml_return(aml_arg(3)));
-    return method;
-}
-
  static void build_acpi0017(Aml *table)
  {
      Aml *dev, *scope, *method;
@@ -1231,7 +1181,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
          aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
          aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
          aml_append(dev, aml_name_decl("_UID", aml_int(pcmc->pci_root_uid)));
-        aml_append(dev, build_q35_osc_method(!pm->pcihp_bridge_en));
+        aml_append(dev, 
build_pci_host_bridge_osc_method(!pm->pcihp_bridge_en));
          aml_append(dev, aml_pci_edsm());
          aml_append(sb_scope, dev);
          if (mcfg_valid) {
@@ -1353,7 +1303,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
                  aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
/* Expander bridges do not have ACPI PCI Hot-plug enabled */
-                aml_append(dev, build_q35_osc_method(true));
+                aml_append(dev, build_pci_host_bridge_osc_method(true));
              } else {
                  aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A03")));
              }


Reply via email to