The mmcfg field in PCIHostState is only used by raven for the PCI
config direct access but is not actually needed as the memory region
lifetime can be managed by the object given during init so use that
and remove the unused field from PCIHostState.

Signed-off-by: BALATON Zoltan <bala...@eik.bme.hu>
---
 hw/pci-host/raven.c       | 7 ++++---
 include/hw/pci/pci_host.h | 1 -
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/pci-host/raven.c b/hw/pci-host/raven.c
index c39e95b45f..7550c291c6 100644
--- a/hw/pci-host/raven.c
+++ b/hw/pci-host/raven.c
@@ -212,7 +212,7 @@ static void raven_pcihost_realizefn(DeviceState *d, Error 
**errp)
     SysBusDevice *dev = SYS_BUS_DEVICE(d);
     PCIHostState *h = PCI_HOST_BRIDGE(dev);
     PREPPCIState *s = RAVEN_PCI_HOST_BRIDGE(dev);
-    MemoryRegion *address_space_mem = get_system_memory();
+    MemoryRegion *mr, *address_space_mem = get_system_memory();
 
     qdev_init_gpio_in(d, raven_change_gpio, 1);
 
@@ -229,9 +229,10 @@ static void raven_pcihost_realizefn(DeviceState *d, Error 
**errp)
                           "pci-conf-data", 4);
     memory_region_add_subregion(&s->pci_io, 0xcfc, &h->data_mem);
 
-    memory_region_init_io(&h->mmcfg, OBJECT(h), &raven_mmcfg_ops, h->bus,
+    mr = g_new0(MemoryRegion, 1);
+    memory_region_init_io(mr, OBJECT(h), &raven_mmcfg_ops, h->bus,
                           "pci-mmcfg", 0x00400000);
-    memory_region_add_subregion(address_space_mem, 0x80800000, &h->mmcfg);
+    memory_region_add_subregion(address_space_mem, 0x80800000, mr);
 
     memory_region_init_io(&s->pci_intack, OBJECT(s), &raven_intack_ops, s,
                           "pci-intack", 1);
diff --git a/include/hw/pci/pci_host.h b/include/hw/pci/pci_host.h
index e52d8ec2cd..7c0285e2ff 100644
--- a/include/hw/pci/pci_host.h
+++ b/include/hw/pci/pci_host.h
@@ -41,7 +41,6 @@ struct PCIHostState {
 
     MemoryRegion conf_mem;
     MemoryRegion data_mem;
-    MemoryRegion mmcfg;
     uint32_t config_reg;
     bool mig_enabled;
     PCIBus *bus;
-- 
2.41.3


Reply via email to