[PATCH v2 3/9] hw/riscv/virt.c: use s->memmap in virt_machine_done()

[Daniel Henrique Barboza]

Signed-off-by: Daniel Henrique Barboza <dbarb...@ventanamicro.com>
---
 hw/riscv/virt.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index b4a6916abb..f324777161 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -1429,9 +1429,8 @@ static void virt_machine_done(Notifier *notifier, void 
*data)
 {
     RISCVVirtState *s = container_of(notifier, RISCVVirtState,
                                      machine_done);
-    const MemMapEntry *memmap = virt_memmap;
     MachineState *machine = MACHINE(s);
-    hwaddr start_addr = memmap[VIRT_DRAM].base;
+    hwaddr start_addr = s->memmap[VIRT_DRAM].base;
     target_ulong firmware_end_addr, kernel_start_addr;
     const char *firmware_name = riscv_default_firmware_name(&s->soc[0]);
     uint64_t fdt_load_addr;
@@ -1475,14 +1474,14 @@ static void virt_machine_done(Notifier *notifier, void 
*data)
              * let's overwrite the address we jump to after reset to
              * the base of the flash.
              */
-            start_addr = virt_memmap[VIRT_FLASH].base;
+            start_addr = s->memmap[VIRT_FLASH].base;
         } else {
             /*
              * Pflash was supplied but either KVM guest or bios is not none.
              * In this case, base of the flash would contain S-mode payload.
              */
             riscv_setup_firmware_boot(machine);
-            kernel_entry = virt_memmap[VIRT_FLASH].base;
+            kernel_entry = s->memmap[VIRT_FLASH].base;
         }
     }
 
@@ -1496,15 +1495,15 @@ static void virt_machine_done(Notifier *notifier, void 
*data)
         kernel_entry = boot_info.image_low_addr;
     }
 
-    fdt_load_addr = riscv_compute_fdt_addr(memmap[VIRT_DRAM].base,
-                                           memmap[VIRT_DRAM].size,
+    fdt_load_addr = riscv_compute_fdt_addr(s->memmap[VIRT_DRAM].base,
+                                           s->memmap[VIRT_DRAM].size,
                                            machine, &boot_info);
     riscv_load_fdt(fdt_load_addr, machine->fdt);
 
     /* load the reset vector */
     riscv_setup_rom_reset_vec(machine, &s->soc[0], start_addr,
-                              virt_memmap[VIRT_MROM].base,
-                              virt_memmap[VIRT_MROM].size, kernel_entry,
+                              s->memmap[VIRT_MROM].base,
+                              s->memmap[VIRT_MROM].size, kernel_entry,
                               fdt_load_addr);
 
     /*
-- 
2.49.0