In the previous design, the I2C model would update I2CC_DMA_LEN (0x54) based on
the value of I2CM_DMA_LEN (0x1C) when the firmware set either I2CM_DMA_TX_ADDR
(0x30) or I2CM_DMA_RX_ADDR (0x34). However, this only worked correctly if the
firmware set I2CM_DMA_LEN before setting I2CM_DMA_TX_ADDR or I2CM_DMA_RX_ADDR.
If the firmware instead set I2CM_DMA_TX_ADDR or I2CM_DMA_RX_ADDR before setting
I2CM_DMA_LEN, the value written to I2CC_DMA_LEN would be incorrect.
To fix this issue, the model should be updated to set I2CC_DMA_LEN when the
firmware writes to the I2CM_DMA_LEN register, rather than when it writes to the
I2CM_DMA_RX_ADDR and I2CM_DMA_TX_ADDR registers.
Signed-off-by: Jamin Lin <jamin_...@aspeedtech.com>
Fixes: ba2cccd (aspeed: i2c: Add new mode support)
Change-Id: Ibb4039773a88ba4f2ebda7f1ab5b5f9e99d22456
---
hw/i2c/aspeed_i2c.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index a8fbb9f44a..c68b8a5ec0 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -656,8 +656,6 @@ static void aspeed_i2c_bus_new_write(AspeedI2CBus *bus,
hwaddr offset,
bus->dma_dram_offset =
deposit64(bus->dma_dram_offset, 0, 32,
FIELD_EX32(value, I2CM_DMA_TX_ADDR, ADDR));
- bus->regs[R_I2CC_DMA_LEN] = ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN,
- TX_BUF_LEN) + 1;
break;
case A_I2CM_DMA_RX_ADDR:
bus->regs[R_I2CM_DMA_RX_ADDR] = FIELD_EX32(value, I2CM_DMA_RX_ADDR,
@@ -665,8 +663,6 @@ static void aspeed_i2c_bus_new_write(AspeedI2CBus *bus,
hwaddr offset,
bus->dma_dram_offset =
deposit64(bus->dma_dram_offset, 0, 32,
FIELD_EX32(value, I2CM_DMA_RX_ADDR, ADDR));
- bus->regs[R_I2CC_DMA_LEN] = ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN,
- RX_BUF_LEN) + 1;
break;
case A_I2CM_DMA_LEN:
w1t = FIELD_EX32(value, I2CM_DMA_LEN, RX_BUF_LEN_W1T) ||
@@ -679,10 +675,16 @@ static void aspeed_i2c_bus_new_write(AspeedI2CBus *bus,
hwaddr offset,
if (FIELD_EX32(value, I2CM_DMA_LEN, RX_BUF_LEN_W1T)) {
ARRAY_FIELD_DP32(bus->regs, I2CM_DMA_LEN, RX_BUF_LEN,
FIELD_EX32(value, I2CM_DMA_LEN, RX_BUF_LEN));
+ bus->regs[R_I2CC_DMA_LEN] = ARRAY_FIELD_EX32(bus->regs,
+ I2CM_DMA_LEN,
+ RX_BUF_LEN) + 1;
}
if (FIELD_EX32(value, I2CM_DMA_LEN, TX_BUF_LEN_W1T)) {
ARRAY_FIELD_DP32(bus->regs, I2CM_DMA_LEN, TX_BUF_LEN,
FIELD_EX32(value, I2CM_DMA_LEN, TX_BUF_LEN));
+ bus->regs[R_I2CC_DMA_LEN] = ARRAY_FIELD_EX32(bus->regs,
+ I2CM_DMA_LEN,
+ TX_BUF_LEN) + 1;
}
break;
case A_I2CM_DMA_LEN_STS:
--
2.43.0
