The issue started after commit
https://github.com/qemu/qemu/commit/59f4d65584bd3372070e2484876436c8d02505e4
Reproduction:
1. In the build directory on MacOS (haven't tried on other OS), run:
../configure --enable-rust --target-list=aarch64-softmmu
2. Then run either:
ninja -C .
OR
make
3. At the end, you will encounter the error:
duplicate symbol '_pl011_create' in:
/Users/tanishdesai37/Downloads/qemu-master/build/libcommon.a.p/hw_char_pl011.c.o
librust_aarch64_softmmu.a[5](pl011.pl011.390d424367e209af-cgu.1.rcgu.o)
ld: 1 duplicate symbols
Root cause:
Both CONFIG_PL011 and X_PL011_RUST are selected, causing C++ and Rust to
produce the same object.
This is due to the commit above where 'select PL011' forces a true condition
instead of checking if HAVE_RUST is true.
If HAVE_RUST is true, X_PL011_RUST should be selected instead of CONFIG_PL011.
Signed-off-by: Tanish Desai <tanishdesa...@gmail.com>
---
hw/vmapple/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/hw/vmapple/Kconfig b/hw/vmapple/Kconfig
index 2382b297672..01bcbf40e00 100644
--- a/hw/vmapple/Kconfig
+++ b/hw/vmapple/Kconfig
@@ -22,7 +22,8 @@ config VMAPPLE
select PLATFORM_BUS
select PCI_EXPRESS
select PCI_EXPRESS_GENERIC_BRIDGE
- select PL011 # UART
+ select PL011 if !HAVE_RUST # UART
+ select X_PL011_RUST if HAVE_RUST # UART
select PL031 # RTC
select PL061 # GPIO
select GPIO_PWR
--
2.48.1
