On 05/04/12 15:15, Kevin O'Connor wrote: > On Fri, May 04, 2012 at 10:21:23AM +0200, Gerd Hoffmann wrote: >> seabios used to initialize root bus devices only, with this patch >> devices behind pci bridges are initialized too. This allows to boot >> from virtio devices behind pci bridges. >> >> Signed-off-by: Gerd Hoffmann <kra...@redhat.com> >> --- >> src/pciinit.c | 3 --- >> 1 files changed, 0 insertions(+), 3 deletions(-) >> >> diff --git a/src/pciinit.c b/src/pciinit.c >> index 25b04ac..6a7a0d2 100644 >> --- a/src/pciinit.c >> +++ b/src/pciinit.c >> @@ -213,9 +213,6 @@ static void pci_bios_init_devices(void) >> { >> struct pci_device *pci; >> foreachpci(pci) { >> - if (pci_bdf_to_bus(pci->bdf) != 0) >> - // Only init devices on host bus. >> - break; > > I think this will then assign an incorrect PCI_INTERRUPT_LINE value to > non root bus devices.
Attached patch should fix it if I read the specs correctly. Untested though, review appreciated. cheers, Gerd
>From a36868ea1b32978244624a62ce7742346cbf5e50 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann <kra...@redhat.com> Date: Fri, 4 May 2012 17:33:36 +0200 Subject: [PATCH] pci: handle bridge irq mapping Signed-off-by: Gerd Hoffmann <kra...@redhat.com> --- src/pciinit.c | 12 +++++++++--- 1 files changed, 9 insertions(+), 3 deletions(-) diff --git a/src/pciinit.c b/src/pciinit.c index 52c5b69..e2bdc0c 100644 --- a/src/pciinit.c +++ b/src/pciinit.c @@ -88,9 +88,15 @@ const u8 pci_irqs[4] = { }; // Return the global irq number corresponding to a host bus device irq pin. -static int pci_slot_get_irq(u16 bdf, int pin) +static int pci_slot_get_irq(struct pci_device *pci, int pin) { - int slot_addend = pci_bdf_to_dev(bdf) - 1; + int slot_addend = 0; + + while (pci->parent != NULL) { + slot_addend += pci_bdf_to_dev(pci->bdf); + pci = pci->parent; + } + slot_addend += pci_bdf_to_dev(pci->bdf) - 1; return pci_irqs[(pin - 1 + slot_addend) & 3]; } @@ -211,7 +217,7 @@ static void pci_bios_init_device(struct pci_device *pci) /* map the interrupt */ int pin = pci_config_readb(bdf, PCI_INTERRUPT_PIN); if (pin != 0) - pci_config_writeb(bdf, PCI_INTERRUPT_LINE, pci_slot_get_irq(bdf, pin)); + pci_config_writeb(bdf, PCI_INTERRUPT_LINE, pci_slot_get_irq(pci, pin)); pci_init_device(pci_device_tbl, pci, NULL); } -- 1.7.1