From: Peter Maydell <peter.mayd...@linaro.org> For accesses to the 91c111 data register, the address within the packet's data frame is determined by a combination of the pointer register and the offset used to access the data register, so that you can access data at effectively wider than byte width. The pointer register's pointer field is 11 bits wide, which is exactly the size to index a 2048-byte data frame.
We weren't quite getting the logic right for ensuring that we end up with a pointer value to use in the s->data[][] array that isn't out of bounds: * we correctly mask when getting the initial pointer value * for the "autoincrement the pointer register" case, we correctly mask after adding 1 so that the pointer register wraps back around at the 2048 byte mark * but for the non-autoincrement case where we have to add the low 2 bits of the data register offset, we don't account for the possibility that the pointer register is 0x7ff and the addition should wrap Fix this bug by factoring out the "get the p value to use as an array index" into a function, making it use FIELD macro names rather than hard-coded constants, and having a utility function that does "add a value and wrap it" that we can use both for the "autoincrement" and "add the offset bits" codepaths. Cc: qemu-sta...@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2758 Signed-off-by: Peter Maydell <peter.mayd...@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <phi...@linaro.org> Message-ID: <20250228191652.1957208-1-peter.mayd...@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <phi...@linaro.org> --- hw/net/smc91c111.c | 65 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 53 insertions(+), 12 deletions(-) diff --git a/hw/net/smc91c111.c b/hw/net/smc91c111.c index b05970d5e1c..9ce42b56155 100644 --- a/hw/net/smc91c111.c +++ b/hw/net/smc91c111.c @@ -13,6 +13,7 @@ #include "net/net.h" #include "hw/irq.h" #include "hw/net/smc91c111.h" +#include "hw/registerfields.h" #include "hw/qdev-properties.h" #include "qapi/error.h" #include "qemu/log.h" @@ -126,6 +127,13 @@ static const VMStateDescription vmstate_smc91c111 = { #define RS_TOOSHORT 0x0400 #define RS_MULTICAST 0x0001 +FIELD(PTR, PTR, 0, 11) +FIELD(PTR, NOT_EMPTY, 11, 1) +FIELD(PTR, RESERVED, 12, 1) +FIELD(PTR, READ, 13, 1) +FIELD(PTR, AUTOINCR, 14, 1) +FIELD(PTR, RCV, 15, 1) + static inline bool packetnum_valid(int packet_num) { return packet_num >= 0 && packet_num < NUM_PACKETS; @@ -372,6 +380,49 @@ static void smc91c111_reset(DeviceState *dev) #define SET_LOW(name, val) s->name = (s->name & 0xff00) | val #define SET_HIGH(name, val) s->name = (s->name & 0xff) | (val << 8) +/* + * The pointer register's pointer is an 11 bit value (so it exactly + * indexes a 2048-byte data frame). Add the specified offset to it, + * wrapping around at the 2048 byte mark, and return the resulting + * wrapped value. There are flag bits in the top part of the register, + * but we can ignore them here as the mask will mask them out. + */ +static int ptr_reg_add(smc91c111_state *s, int offset) +{ + return (s->ptr + offset) & R_PTR_PTR_MASK; +} + +/* + * For an access to the Data Register at @offset, return the + * required offset into the packet's data frame. This will + * perform the pointer register autoincrement if required, and + * guarantees to return an in-bounds offset. + */ +static int data_reg_ptr(smc91c111_state *s, int offset) +{ + int p; + + if (s->ptr & R_PTR_AUTOINCR_MASK) { + /* + * Autoincrement: use the current pointer value, and + * increment the pointer register's pointer field. + */ + p = FIELD_EX32(s->ptr, PTR, PTR); + s->ptr = FIELD_DP32(s->ptr, PTR, PTR, ptr_reg_add(s, 1)); + } else { + /* + * No autoincrement: register offset determines which + * byte we're addressing. Setting the pointer to the top + * of the data buffer and then using the pointer wrapping + * to read the bottom byte of the buffer is not something + * sensible guest software will do, but the datasheet + * doesn't say what the behaviour is, so we don't forbid it. + */ + p = ptr_reg_add(s, offset & 3); + } + return p; +} + static void smc91c111_writeb(void *opaque, hwaddr offset, uint32_t value) { @@ -518,12 +569,7 @@ static void smc91c111_writeb(void *opaque, hwaddr offset, n); return; } - p = s->ptr & 0x07ff; - if (s->ptr & 0x4000) { - s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x7ff); - } else { - p += (offset & 3); - } + p = data_reg_ptr(s, offset); s->data[n][p] = value; } return; @@ -673,12 +719,7 @@ static uint32_t smc91c111_readb(void *opaque, hwaddr offset) n); return 0; } - p = s->ptr & 0x07ff; - if (s->ptr & 0x4000) { - s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x07ff); - } else { - p += (offset & 3); - } + p = data_reg_ptr(s, offset); return s->data[n][p]; } case 12: /* Interrupt status. */ -- 2.47.1
