On Thu, 27 Feb 2025, Nicholas Piggin wrote:
On Sun Feb 23, 2025 at 3:52 AM AEST, BALATON Zoltan wrote:The board has a battery backed NVRAM where U-Boot environment is stored which is also accessed by AmigaOS and e.g. C:NVGetVar command crashes without it having at least a valid checksum.Signed-off-by: BALATON Zoltan <bala...@eik.bme.hu> --- hw/ppc/amigaone.c | 116 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 113 insertions(+), 3 deletions(-) diff --git a/hw/ppc/amigaone.c b/hw/ppc/amigaone.c index 4290d58613..5273543460 100644 --- a/hw/ppc/amigaone.c +++ b/hw/ppc/amigaone.c @@ -21,10 +21,13 @@ #include "hw/ide/pci.h" #include "hw/i2c/smbus_eeprom.h" #include "hw/ppc/ppc.h" +#include "system/block-backend.h" #include "system/qtest.h" #include "system/reset.h" #include "kvm_ppc.h" +#include <zlib.h> /* for crc32 */ + #define BUS_FREQ_HZ 100000000 /* @@ -46,6 +49,103 @@ static const char dummy_fw[] = { 0x4e, 0x80, 0x00, 0x20, /* blr */ }; +#define NVRAM_ADDR 0xfd0e0000 +#define NVRAM_SIZE (4 * KiB) + +#define TYPE_A1_NVRAM "a1-nvram" +OBJECT_DECLARE_SIMPLE_TYPE(A1NVRAMState, A1_NVRAM) + +struct A1NVRAMState { + SysBusDevice parent_obj; + + MemoryRegion mr; + BlockBackend *blk; +}; + +/* read callback not used because of romd mode, only here just in case */Better make it g_assert_not_reached() then.
There is a memory_region_rom_device_set_romd() function. It's not called here so a read function should not be needed but it's also trivial and would work if romd mode is turned off for some reason in the future so adding it seems safer to me. The comment is just to note it's a romd region so reads normally don't go through this function unless romd mode is turned off.
+static uint64_t nvram_read(void *opaque, hwaddr addr, unsigned int size) +{ + A1NVRAMState *s = opaque; + uint8_t *p = memory_region_get_ram_ptr(&s->mr); + + return p[addr]; +} + +static void nvram_write(void *opaque, hwaddr addr, uint64_t val, + unsigned int size) +{ + A1NVRAMState *s = opaque; + uint8_t *p = memory_region_get_ram_ptr(&s->mr); + + p[addr] = val; + if (s->blk) { + blk_pwrite(s->blk, addr, 1, &val, 0); + } +} + +static const MemoryRegionOps nvram_ops = { + .read = nvram_read, + .write = nvram_write, + .endianness = DEVICE_BIG_ENDIAN, + .impl = { + .min_access_size = 1, + .max_access_size = 1, + }, +}; + +static void nvram_realize(DeviceState *dev, Error **errp) +{ + A1NVRAMState *s = A1_NVRAM(dev); + void *p; + uint32_t *c; + + memory_region_init_rom_device(&s->mr, NULL, &nvram_ops, s, "nvram", + NVRAM_SIZE, &error_fatal); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mr); + c = p = memory_region_get_ram_ptr(&s->mr); + if (s->blk) { + if (blk_getlength(s->blk) != NVRAM_SIZE) { + error_setg(errp, "NVRAM backing file size must be %ld bytes", + NVRAM_SIZE); + return; + } + blk_set_perm(s->blk, BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE, + BLK_PERM_ALL, &error_fatal); + if (blk_pread(s->blk, 0, NVRAM_SIZE, p, 0) < 0) { + error_setg(errp, "Cannot read NVRAM contents from backing file"); + return; + } + } + if (*c == 0) { + *c = cpu_to_be32(crc32(0, p + 4, NVRAM_SIZE - 4)); + if (s->blk) { + blk_pwrite(s->blk, 0, 4, p, 0); + } + } +}So, no need for a reset because it's persistent?
It's either written to the backing file when changed or stays unchanged on reboot so no need to reset. The idea is to provide a default if there's no backing file but allow the user to change it for the session but not keep changes between sessions. With backing file it's like real machine keeping settings between reboots. I don't think it needs anything in reset.
+ +static const Property nvram_properties[] = { + DEFINE_PROP_DRIVE("drive", A1NVRAMState, blk), +}; + +static void nvram_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = nvram_realize; + device_class_set_props(dc, nvram_properties); +} + +static const TypeInfo nvram_types[] = { + { + .name = TYPE_A1_NVRAM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(A1NVRAMState), + .class_init = nvram_class_init, + }, +}; +DEFINE_TYPES(nvram_types) + static void amigaone_cpu_reset(void *opaque) { PowerPCCPU *cpu = opaque; @@ -72,7 +172,7 @@ static void amigaone_init(MachineState *machine) DeviceState *dev; I2CBus *i2c_bus; uint8_t *spd_data; - int i; + DriveInfo *di; /* init CPU */ cpu = POWERPC_CPU(cpu_create(machine->cpu_type)); @@ -97,6 +197,16 @@ static void amigaone_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), 0x40000000, mr); } + /* nvram */ + dev = qdev_new(TYPE_A1_NVRAM); + di = drive_get(IF_MTD, 0, 0); + if (di) { + qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(di)); + } + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + memory_region_add_subregion(get_system_memory(), NVRAM_ADDR, + sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0)); + /* allocate and load firmware */ rom = g_new(MemoryRegion, 1); memory_region_init_rom(rom, NULL, "rom", PROM_SIZE, &error_fatal); @@ -136,7 +246,7 @@ static void amigaone_init(MachineState *machine) pci_mem = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1); mr = g_new(MemoryRegion, 1); memory_region_init_alias(mr, OBJECT(dev), "pci-mem-low", pci_mem, - 0, 0x1000000); + 0, 0xe0000); memory_region_add_subregion(get_system_memory(), 0xfd000000, mr);Better make these addresses #defines at the top of the file with the NVRAM_ADDR?
I don't have defines for these as these are single use constants to set up memory map and with defines it's less obvious and has to be looked up where these are while this way I can see it directly without having to scroll up so I prefer this. I've added defines where the constant is used more than once where it makes sense to keep consistency.
Regards, BALATON Zoltan
Thanks, Nickmr = g_new(MemoryRegion, 1); memory_region_init_alias(mr, OBJECT(dev), "pci-mem-high", pci_mem, @@ -153,7 +263,7 @@ static void amigaone_init(MachineState *machine) qdev_connect_gpio_out_named(DEVICE(via), "intr", 0, qdev_get_gpio_in(DEVICE(cpu), PPC6xx_INPUT_INT)); - for (i = 0; i < PCI_NUM_PINS; i++) { + for (int i = 0; i < PCI_NUM_PINS; i++) { qdev_connect_gpio_out(dev, i, qdev_get_gpio_in_named(DEVICE(via), "pirq", i)); }
