On Thu, 13 Feb 2025, Thomas Huth wrote:
On 12/02/2025 23.34, BALATON Zoltan wrote:
On Wed, 12 Feb 2025, Philippe Mathieu-Daudé wrote:
On 12/2/25 17:23, BALATON Zoltan wrote:
On Wed, 12 Feb 2025, Philippe Mathieu-Daudé wrote:
On 12/2/25 14:53, Philippe Mathieu-Daudé wrote:
On 12/2/25 13:56, BALATON Zoltan wrote:
On Wed, 12 Feb 2025, Philippe Mathieu-Daudé wrote:
On 12/2/25 12:37, Thomas Huth wrote:
On 12/02/2025 12.24, Philippe Mathieu-Daudé wrote:
Introduce the EndianMode type and the DEFINE_PROP_ENDIAN() macros.
Endianness can be BIG, LITTLE or unspecified (default).
Signed-off-by: Philippe Mathieu-Daudé <phi...@linaro.org>
---
qapi/common.json | 16 ++++++++++++++++
include/hw/qdev-properties-system.h | 7 +++++++
hw/core/qdev-properties-system.c | 11 +++++++++++
3 files changed, 34 insertions(+)
+{ 'enum': 'EndianMode',
+ 'data': [ 'little', 'big', 'unspecified' ] }
Should 'unspecified' come first? ... so that it gets the value 0,
i.e. when someone forgets to properly initialize a related variable,
the chances are higher that it ends up as "unspecified" than as
"little" ?
Hmm but then in this series the dual-endianness regions are defined
as:
+static const MemoryRegionOps pic_ops[2] = {
+ [0 ... 1] = {
This is already confusing as you'd have to know that 0 and 1 here
means ENDIAN_MODE_LITTLE and ENDIAN_MODE_BIG (using those constants
here as well might be clearer). It's easy to miss what this does so
At this point 0 / 1 only mean "from the index #0 included to the index
#1 included", 0 being the first one and 1 the last one.
maybe repeating the definitions for each case would be longer but less
confusing and then it does not matter what the values are.
This is what I tried to do with:
+ [ENDIAN_MODE_BIG].endianness = DEVICE_BIG_ENDIAN,
+ [ENDIAN_MODE_LITTLE].endianness = DEVICE_LITTLE_ENDIAN,
};
but in v7 we are back of picking an arbitrary value.
Or what uses the ops.endianness now should look at the property
introduced by this patch to avoid having to propagate it like below
and drop the ops.endianness? Or it should move to the memory region
and set when the ops are assigned?
I'm not understanding well what you ask, but maybe the answer is in v7
:)
I'm not sure I understand it well either. I think what I was asking about
is the same as what Thomas asked if this could be avoided to make it
necessary to allocate two separate ops for this. Looks like from now on
this ops struct should really loose the endianness value and this should
be assigned when the ops is added to the io region because that's where
it decides which endianness is it based on the property added in this
series. But I don't know if that could be done or would need deeper
changes as what later uses this ops struct might not have access to the
property and if we have a single ops struct it may need to be copied to
set different endianness intstead of just referencing it. So I'm not sure
there's a better way but I think this change makes an already cryptic
boiler plate even more confusing for people less knowledgeable about QEMU
and C programming so it makes even harder to write devices. But as long
as it's just a few devices that need to work with different endianness
then it might be OK. But wasn't that what NATIVE_ENDIAN was meant for?
What can't that be kept then?
Moving toward a single binary able to run heterogeneous machines, we
can't rely on a particular target endianness, so we need to remove
DEVICE_NATIVE_ENDIAN. The endianness is a property a device / machine,
not of the binary.
So then can the behaviour of NATIVE_ENDIAN be changed to look at the
machine endianness instead of replacing it with a constant?
No, that does not work. First, the machine knows about its devices, but a
device should not know about the wiring of the global machine (just like in
real life).
That means all devices should be either big or little endian and there
should be no native endian ones. Why do we have those then? That's why
this endianness property should either be removed from ops and only
attached to it when added to a machine if needed or kept to show which
machines it can be attached to: only big, little or both endian which is
what it seems to be doing now.
Second, imagine a board with e.g. a big endian main CPU and a
little endian service processor - how should a device know the right
endianness here?
How would that work with this series? So the proposed solution is to
double the devices now marked as NATIVE_ENDIAN to have a big and a little
endian variant for them so the board can choose? That does not exist in
real as you wrote, there's only one device so then this is probably not
the right way to model it.
Or would that be too much overhead? If always looking up the endianness is
not wanted could the ops declaration keep NATIVE_ENDIAN
IMHO we should get rid of NATIVE_ENDIAN completely since there is no "native"
endian in multi-CPU boards.
If we say NATIVE_ENDIAN means that the device can be attached to either
big or little endian machine then we can keep this constant but when
adding the ops to a memory region the board has to then decide which
endianness it is and replace it with either big or little. Then we don't
need two versions of the same device and NATIVE_ENDIAN means that the
device can be used in both machines.
In real life probably all devices can be used with either CPU and if they
are accessed in little or big endian is only determinded by how they are
wired on the board. So the device endianness only means what endianness
the device expects for something (what exactly? e.g. a video chip may have
a frame buffer and a registers area with different endianness). So this
should be the board that decides this not the device. Therefore it may not
need to be defined when MemoryRegionOps is defined at all (or only as a
hint to show what the device expects normally) and then
memory_region_init_io which takes the MemoryRegionOps should also take an
endianness corresponding the board and set it at that point. It can warn
if the device endianness does not match what the board sets but you can
still connect a big endian device to a little endian CPU as long as the
drivers write the right values or the data lines are connected the right
way, the latter of which corresponds to NATIVE_ENDIAN now as the
conversion is done by the wiring so drivers don't need to care.
But if it's simpler to just double the few devices that need to be used
this way then it's a possible solution but if there's a cleaner one with
not much more complexity then maybe that should be considered, because the
way to define these doubled devices is a bit confusing for new people (on
top of that defining devices is already confusing with the lot of boiler
plate code needed). So if this could be kept simpler that would be a good
thing IMO.
Regards,
BALATON Zoltan
