From: Helge Deller <del...@gmx.de>
Until now we used a standard serial-pci device to emulate a HP serial
console. This worked nicely with 32-bit Linux and 32-bit HP-UX, but
64-bit HP-UX crashes with it and expects either a Diva GSP card, or a real
64-bit capable PCI graphic card (which we don't have yet).
In order to continue with 64-bit HP-UX, switch over to the recently
added Diva GSP card emulation.
Signed-off-by: Helge Deller <del...@gmx.de>
---
hw/hppa/Kconfig | 1 +
hw/hppa/machine.c | 24 ++++++------------------
2 files changed, 7 insertions(+), 18 deletions(-)
diff --git a/hw/hppa/Kconfig b/hw/hppa/Kconfig
index 9312c4294a..cab21045de 100644
--- a/hw/hppa/Kconfig
+++ b/hw/hppa/Kconfig
@@ -11,6 +11,7 @@ config HPPA_B160L
select LASI
select SERIAL_MM
select SERIAL_PCI
+ select DIVA_GSP
select ISA_BUS
select I8259
select IDE_CMD646
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index d5de793b62..1155d9aba9 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -383,28 +383,16 @@ static void machine_HP_common_init_tail(MachineState
*machine, PCIBus *pci_bus,
pci_init_nic_devices(pci_bus, mc->default_nic);
- /* BMC board: HP Powerbar SP2 Diva (with console only) */
- pci_dev = pci_new(-1, "pci-serial");
+ /* BMC board: HP Diva GSP */
+ pci_dev = pci_new_multifunction(PCI_DEVFN(2, 0), "diva-serial");
if (!lasi_dev) {
/* bind default keyboard/serial to Diva card */
- qdev_prop_set_chr(DEVICE(pci_dev), "chardev", serial_hd(0));
+ qdev_prop_set_chr(DEVICE(pci_dev), "chardev1", serial_hd(0));
+ qdev_prop_set_chr(DEVICE(pci_dev), "chardev2", serial_hd(1));
+ qdev_prop_set_chr(DEVICE(pci_dev), "chardev3", serial_hd(2));
+ qdev_prop_set_chr(DEVICE(pci_dev), "chardev4", serial_hd(3));
}
- qdev_prop_set_uint8(DEVICE(pci_dev), "prog_if", 0);
pci_realize_and_unref(pci_dev, pci_bus, &error_fatal);
- pci_config_set_vendor_id(pci_dev->config, PCI_VENDOR_ID_HP);
- pci_config_set_device_id(pci_dev->config, 0x1048);
- pci_set_word(&pci_dev->config[PCI_SUBSYSTEM_VENDOR_ID], PCI_VENDOR_ID_HP);
- pci_set_word(&pci_dev->config[PCI_SUBSYSTEM_ID], 0x1227); /* Powerbar */
-
- /* create a second serial PCI card when running Astro */
- if (serial_hd(1) && !lasi_dev) {
- pci_dev = pci_new(-1, "pci-serial-4x");
- qdev_prop_set_chr(DEVICE(pci_dev), "chardev1", serial_hd(1));
- qdev_prop_set_chr(DEVICE(pci_dev), "chardev2", serial_hd(2));
- qdev_prop_set_chr(DEVICE(pci_dev), "chardev3", serial_hd(3));
- qdev_prop_set_chr(DEVICE(pci_dev), "chardev4", serial_hd(4));
- pci_realize_and_unref(pci_dev, pci_bus, &error_fatal);
- }
/* create USB OHCI controller for USB keyboard & mouse on Astro machines */
if (!lasi_dev && machine->enable_graphics && defaults_enabled()) {
--
2.47.0
