Steven Sistare <steven.sist...@oracle.com> writes:
> On 1/17/2025 10:29 AM, Fabiano Rosas wrote:
>> Steven Sistare <steven.sist...@oracle.com> writes:
>>
>>> On 1/17/2025 9:42 AM, Fabiano Rosas wrote:
>>>> Steve Sistare <steven.sist...@oracle.com> writes:
>>>>
>>>>> Add documentation for the cpr-transfer migration mode.
>>>>>
>>>>> Signed-off-by: Steve Sistare <steven.sist...@oracle.com>
>>>>> Reviewed-by: Peter Xu <pet...@redhat.com>
>>>>> ---
>>>>> docs/devel/migration/CPR.rst | 182
>>>>> ++++++++++++++++++++++++++++++++++++++++++-
>>>>> 1 file changed, 180 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/docs/devel/migration/CPR.rst b/docs/devel/migration/CPR.rst
>>>>> index 63c3647..d6021d5 100644
>>>>> --- a/docs/devel/migration/CPR.rst
>>>>> +++ b/docs/devel/migration/CPR.rst
>>>>> @@ -5,7 +5,7 @@ CPR is the umbrella name for a set of migration modes in
>>>>> which the
>>>>> VM is migrated to a new QEMU instance on the same host. It is
>>>>> intended for use when the goal is to update host software components
>>>>> that run the VM, such as QEMU or even the host kernel. At this time,
>>>>> -cpr-reboot is the only available mode.
>>>>> +the cpr-reboot and cpr-transfer modes are available.
>>>>>
>>>>> Because QEMU is restarted on the same host, with access to the same
>>>>> local devices, CPR is allowed in certain cases where normal migration
>>>>> @@ -53,7 +53,7 @@ RAM is copied to the migration URI.
>>>>> Outgoing:
>>>>> * Set the migration mode parameter to ``cpr-reboot``.
>>>>> * Set the ``x-ignore-shared`` capability if desired.
>>>>> - * Issue the ``migrate`` command. It is recommended the the URI be a
>>>>> + * Issue the ``migrate`` command. It is recommended the URI be a
>>>>> ``file`` type, but one can use other types such as ``exec``,
>>>>> provided the command captures all the data from the outgoing side,
>>>>> and provides all the data to the incoming side.
>>>>> @@ -145,3 +145,181 @@ Caveats
>>>>>
>>>>> cpr-reboot mode may not be used with postcopy, background-snapshot,
>>>>> or COLO.
>>>>> +
>>>>> +cpr-transfer mode
>>>>> +-----------------
>>>>> +
>>>>> +This mode allows the user to transfer a guest to a new QEMU instance
>>>>> +on the same host with minimal guest pause time, by preserving guest
>>>>> +RAM in place, albeit with new virtual addresses in new QEMU. Devices
>>>>> +and their pinned memory pages will also be preserved in a future QEMU
>>>>> +release.
>>>>> +
>>>>> +The user starts new QEMU on the same host as old QEMU, with command-
>>>>> +line arguments to create the same machine, plus the ``-incoming``
>>>>> +option for the main migration channel, like normal live migration.
>>>>> +In addition, the user adds a second -incoming option with channel
>>>>> +type ``cpr``. This CPR channel must support file descriptor transfer
>>>>> +with SCM_RIGHTS, i.e. it must be a UNIX domain socket.
>>>>> +
>>>>> +To initiate CPR, the user issues a migrate command to old QEMU,
>>>>> +adding a second migration channel of type ``cpr`` in the channels
>>>>> +argument. Old QEMU stops the VM, saves state to the migration
>>>>> +channels, and enters the postmigrate state. Execution resumes in
>>>>> +new QEMU.
>>>>> +
>>>>> +New QEMU reads the CPR channel before opening a monitor, hence
>>>>> +the CPR channel cannot be specified in the list of channels for a
>>>>> +migrate-incoming command. It may only be specified on the command
>>>>> +line.
>>>>> +
>>>>> +Usage
>>>>> +^^^^^
>>>>> +
>>>>> +Memory backend objects must have the ``share=on`` attribute.
>>>>> +
>>>>> +The VM must be started with the ``-machine aux-ram-share=on``
>>>>> +option. This causes implicit RAM blocks (those not described by
>>>>> +a memory-backend object) to be allocated by mmap'ing a memfd.
>>>>> +Examples include VGA and ROM.
>>>>> +
>>>>> +Outgoing:
>>>>> + * Set the migration mode parameter to ``cpr-transfer``.
>>>>> + * Issue the ``migrate`` command, containing a main channel and
>>>>> + a cpr channel.
>>>>> +
>>>>> +Incoming:
>>>>> + * Start new QEMU with two ``-incoming`` options.
>>>>> + * If the VM was running when the outgoing ``migrate`` command was
>>>>> + issued, then QEMU automatically resumes VM execution.
>>>>> +
>>>>> +Caveats
>>>>> +^^^^^^^
>>>>> +
>>>>> +cpr-transfer mode may not be used with postcopy, background-snapshot,
>>>>> +or COLO.
>>>>> +
>>>>> +memory-backend-epc is not supported.
>>>>> +
>>>>> +The main incoming migration channel address cannot be a file type.
>>>>> +
>>>>> +If the main incoming channel address is an inet socket, then the port
>>>>> +cannot be 0 (meaning dynamically choose a port).
>>>>> +
>>>>> +When using ``-incoming defer``, you must issue the migrate command to
>>>>> +old QEMU before issuing any monitor commands to new QEMU, because new
>>>>> +QEMU blocks waiting to read from the cpr channel before starting its
>>>>> +monitor, and old QEMU does not write to the channel until the migrate
>>>>> +command is issued. However, new QEMU does not open and read the
>>>>> +main migration channel until you issue the migrate incoming command.
>>>>> +
>>>>> +Example 1: incoming channel
>>>>> +^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>>> +
>>>>> +In these examples, we simply restart the same version of QEMU, but
>>>>> +in a real scenario one would start new QEMU on the incoming side.
>>>>> +Note that new QEMU does not print the monitor prompt until old QEMU
>>>>> +has issued the migrate command. The outgoing side uses QMP because
>>>>> +HMP cannot specify a CPR channel. Some QMP responses are omitted for
>>>>> +brevity.
>>>>> +
>>>>> +::
>>>>> +
>>>>> + Outgoing: Incoming:
>>>>> +
>>>>> + # qemu-kvm -qmp stdio
>>>>> + -object memory-backend-file,id=ram0,size=4G,
>>>>> + mem-path=/dev/shm/ram0,share=on -m 4G
>>>>> + -machine aux-ram-share=on
>>>>> + ...
>>>>> + # qemu-kvm -monitor stdio
>>>>> + -incoming tcp:0:44444
>>>>> + -incoming '{"channel-type":
>>>>> "cpr",
>>>>> + "addr": { "transport":
>>>>> "socket",
>>>>> + "type": "unix", "path":
>>>>> "cpr.sock"}}'
>>>>> + ...
>>>>
>>>> I'm attempting this and not having much success. Surely I'm missing
>>>> something:
>>>>
>>>>
>>>> $ qemu-system-x86_64 -cpu host -smp 16 -machine pc,accel=kvm \
>>>> -drive id=drive0,if=none,format=qcow2,file=img.qcow2 \
>>>> -device virtio-blk-pci,id=image1,drive=drive0,bootindex=0 \
>>>> -qmp unix:./dst-qmp.sock,server,wait=off \
>>>> -nographic -serial mon:stdio \
>>>> -object
>>>> memory-backend-file,id=ram0,size=4G,mem-path=/dev/shm/ram0,share=on \
>>>> -m 4G -machine aux-ram-share=on \
>>>>
>>>> -incoming tcp:0:44444 \
>>>> -incoming '{"channel-type": "cpr", "addr": { "transport": "socket",
>>>> "type": "unix", "path": "cpr.sock"}}' \
>>>>
>>>> -trace loadvm_* -trace cpr_* -trace migration_* -trace migrate_*
>>>> -trace qemu_loadvm_*
>>>>
>>>> cpr_transfer_input cpr.sock
>>>> cpr_state_load cpr-transfer mode
>>>> cpr_find_fd pc.bios, id 0 returns 15
>>>> cpr_find_fd pc.rom, id 0 returns 14
>>>> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 13
>>>> cpr_find_fd 0000:00:02.0/vga.rom, id 0 returns 12
>>>> cpr_find_fd 0000:00:03.0/e1000.rom, id 0 returns 11
>>>> cpr_find_fd /rom@etc/acpi/tables, id 0 returns 10
>>>> cpr_find_fd /rom@etc/table-loader, id 0 returns 8
>>>> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 3
>>>> migrate_set_state new state setup
>>>> migration_socket_incoming_accepted
>>>> migration_set_incoming_channel ioc=0x564dc31e7000
>>>> ioctype=qio-channel-socket
>>>> migrate_set_state new state active
>>>> loadvm_state_setup
>>>> qemu_loadvm_state_section 1
>>>> qemu_loadvm_state_section_startfull 2(ram) 0 4
>>>> qemu_loadvm_state_section 3
>>>> qemu_loadvm_state_section_partend 2
>>>> qemu_loadvm_state_section 4
>>>> qemu_loadvm_state_section_startfull 0(timer) 0 2
>>>> qemu_loadvm_state_section 4
>>>> qemu_loadvm_state_section_startfull 1(slirp) 0 4
>>>> qemu_loadvm_state_section 4
>>>> qemu_loadvm_state_section_startfull 4(cpu_common) 0 1
>>>> qemu_loadvm_state_section 4
>>>> qemu_loadvm_state_section_startfull 5(cpu) 0 12
>>>> qemu_loadvm_state_section 4
>>>> qemu_loadvm_state_section_startfull 6(kvm-tpr-opt) 0 1
>>>> qemu-system-x86_64: error while loading state for instance 0x0 of device
>>>> 'kvm-tpr-opt'
>>>> qemu_loadvm_state_post_main -1
>>>> migrate_set_state new state failed
>>>> migrate_error error=load of migration failed: Operation not permitted
>>>> loadvm_state_cleanup
>>>> qemu-system-x86_64: load of migration failed: Operation not permitted
>>>
>>> Check for a mismatch between the qemu args on the source vs dest.
>>> Maybe -cpu.
>>
>> No.. they're the same:
>>
>> qemu-system-x86_64 -display none -cpu host -smp 4 -machine pc,accel=kvm
>> -object
>> memory-backend-file,id=ram0,size=4G,mem-path=/dev/shm/ram0,share=on -m
>> 4G -machine aux-ram-share=on -qmp stdio
>>
>> qemu-system-x86_64 -display none -cpu host -smp 4 -machine pc,accel=kvm
>> -object
>> memory-backend-file,id=ram0,size=4G,mem-path=/dev/shm/ram0,share=on -m
>> 4G -machine aux-ram-share=on -incoming tcp:0:44444 -incoming
>> '{"channel-type": "cpr", "addr": { "transport": "socket", "type":
>> "unix", "path": "cpr.sock"}}' -monitor stdio
>>
>>
>> Here's the whole log, see if you spot something:
>>
>> $ (sleep 5; echo "{ 'execute': 'qmp_capabilities' }
>> { 'execute': 'migrate-set-parameters','arguments':{
>> 'mode': 'cpr-transfer' } }
>> { 'execute': 'migrate', 'arguments': \
>> { 'channels': [ \
>> {'channel-type': 'main', 'addr': { 'transport':
>> 'socket', 'type': 'inet', \
>> 'host': '0', 'port': '44444' }}, \
>> {'channel-type': 'cpr', 'addr': { 'transport':
>> 'socket', 'type': 'unix', \
>> 'path': 'cpr.sock' }} \
>> ]} \
>> }") | /home/fabiano/qemu-system-x86_64 -display none
>> -cpu host -smp 4 -machine pc,accel=kvm -qmp stdio
>> -object
>>
>> memory-backend-file,id=ram0,size=4G,mem-path=/dev/shm/ram0,share=on
>> -m 4G -machine aux-ram-share=on -trace cpr_* -trace
>> migration_* -trace migrate_* -trace qemu_savevm_*
>> -trace savevm_*
>>
>> {"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 9},
>> "package": "v9.2.0-987-gfd4129a8b9"}, "capabilities": ["oob"]}}
>> cpr_find_fd pc.bios, id 0 returns -1
>> cpr_save_fd pc.bios, id 0, fd 22
>> cpr_find_fd pc.rom, id 0 returns -1
>> cpr_save_fd pc.rom, id 0, fd 23
>> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns -1
>> cpr_save_fd 0000:00:02.0/vga.vram, id 0, fd 24
>> cpr_find_fd 0000:00:02.0/vga.rom, id 0 returns -1
>> cpr_save_fd 0000:00:02.0/vga.rom, id 0, fd 26
>> cpr_find_fd 0000:00:03.0/e1000.rom, id 0 returns -1
>> cpr_save_fd 0000:00:03.0/e1000.rom, id 0, fd 27
>> cpr_find_fd /rom@etc/acpi/tables, id 0 returns -1
>> cpr_save_fd /rom@etc/acpi/tables, id 0, fd 28
>> cpr_find_fd /rom@etc/table-loader, id 0 returns -1
>> cpr_save_fd /rom@etc/table-loader, id 0, fd 29
>> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns -1
>> cpr_save_fd /rom@etc/acpi/rsdp, id 0, fd 30
>> migration_block_activation active-skipped
>> {"return": {}}
>> {"return": {}}
>> migrate_set_state new state setup
>> cpr_state_save cpr-transfer mode
>> cpr_transfer_output cpr.sock
>> {"return": {}}
>> migration_socket_outgoing_connected hostname=0
>> migration_set_outgoing_channel ioc=0x55748ba10270 ioctype=qio-channel-socket
>> hostname=0 err=(nil)
>> {"timestamp": {"seconds": 1737127025, "microseconds": 606998}, "event":
>> "STOP"}
>> migration_completion_vm_stop ret 0
>> migration_transferred_bytes qemu_file 224 multifd 0 RDMA 0
>> savevm_state_header
>> savevm_state_setup
>> migration_bitmap_sync_start
>> migration_bitmap_sync_end dirty_pages 0
>> migrate_set_state new state active
>> migration_thread_setup_complete
>> migration_transferred_bytes qemu_file 506 multifd 0 RDMA 0
>> migrate_pending_estimate estimate pending size 0 (pre = 0 post=0)
>> migration_thread_low_pending 0
>> migrate_set_state new state device
>> migration_block_activation inactive
>> migration_precopy_complete
>> savevm_section_start ram, section_id 2
>> migration_bitmap_sync_start
>> migration_bitmap_sync_end dirty_pages 0
>> savevm_section_end ram, section_id 2 -> 0
>> savevm_section_start timer, section_id 0
>> savevm_section_end timer, section_id 0 -> 0
>> savevm_section_start slirp, section_id 1
>> savevm_section_end slirp, section_id 1 -> 0
>> savevm_section_start cpu_common, section_id 4
>> savevm_section_end cpu_common, section_id 4 -> 0
>> savevm_section_start cpu, section_id 5
>> savevm_section_end cpu, section_id 5 -> 0
>> savevm_section_start kvm-tpr-opt, section_id 6
>> savevm_section_end kvm-tpr-opt, section_id 6 -> 0
>> savevm_section_start apic, section_id 7
>> savevm_section_end apic, section_id 7 -> 0
>> savevm_section_start cpu_common, section_id 8
>> savevm_section_end cpu_common, section_id 8 -> 0
>> savevm_section_start cpu, section_id 9
>> savevm_section_end cpu, section_id 9 -> 0
>> savevm_section_start apic, section_id 10
>> savevm_section_end apic, section_id 10 -> 0
>> savevm_section_start cpu_common, section_id 11
>> savevm_section_end cpu_common, section_id 11 -> 0
>> savevm_section_start cpu, section_id 12
>> savevm_section_end cpu, section_id 12 -> 0
>> savevm_section_start apic, section_id 13
>> savevm_section_end apic, section_id 13 -> 0
>> savevm_section_start cpu_common, section_id 14
>> savevm_section_end cpu_common, section_id 14 -> 0
>> savevm_section_start cpu, section_id 15
>> savevm_section_end cpu, section_id 15 -> 0
>> savevm_section_start apic, section_id 16
>> savevm_section_end apic, section_id 16 -> 0
>> savevm_section_start kvmclock, section_id 17
>> savevm_section_end kvmclock, section_id 17 -> 0
>> savevm_section_start 0000:00:00.0/I440FX, section_id 18
>> savevm_section_end 0000:00:00.0/I440FX, section_id 18 -> 0
>> savevm_section_start PCIHost, section_id 19
>> savevm_section_end PCIHost, section_id 19 -> 0
>> savevm_section_start PCIBUS, section_id 20
>> savevm_section_end PCIBUS, section_id 20 -> 0
>> savevm_section_start fw_cfg, section_id 21
>> savevm_section_end fw_cfg, section_id 21 -> 0
>> savevm_section_start dma, section_id 22
>> savevm_section_end dma, section_id 22 -> 0
>> savevm_section_start dma, section_id 23
>> savevm_section_end dma, section_id 23 -> 0
>> savevm_section_start mc146818rtc, section_id 24
>> savevm_section_end mc146818rtc, section_id 24 -> 0
>> savevm_section_start 0000:00:01.1/ide, section_id 25
>> savevm_section_end 0000:00:01.1/ide, section_id 25 -> 0
>> savevm_section_start i2c_bus, section_id 26
>> savevm_section_end i2c_bus, section_id 26 -> 0
>> savevm_section_start 0000:00:01.3/piix4_pm, section_id 27
>> savevm_section_end 0000:00:01.3/piix4_pm, section_id 27 -> 0
>> savevm_section_start 0000:00:01.0/PIIX3, section_id 28
>> savevm_section_end 0000:00:01.0/PIIX3, section_id 28 -> 0
>> savevm_section_start i8259, section_id 29
>> savevm_section_end i8259, section_id 29 -> 0
>> savevm_section_start i8259, section_id 30
>> savevm_section_end i8259, section_id 30 -> 0
>> savevm_section_start ioapic, section_id 31
>> savevm_section_end ioapic, section_id 31 -> 0
>> savevm_section_start 0000:00:02.0/vga, section_id 32
>> savevm_section_end 0000:00:02.0/vga, section_id 32 -> 0
>> savevm_section_start hpet, section_id 33
>> savevm_section_end hpet, section_id 33 -> 0
>> savevm_section_start i8254, section_id 34
>> savevm_section_end i8254, section_id 34 -> 0
>> savevm_section_start pcspk, section_id 35
>> savevm_section_end pcspk, section_id 35 -> 0
>> savevm_section_start serial, section_id 36
>> savevm_section_end serial, section_id 36 -> 0
>> savevm_section_start parallel_isa, section_id 37
>> savevm_section_end parallel_isa, section_id 37 -> 0
>> savevm_section_start fdc, section_id 38
>> savevm_section_end fdc, section_id 38 -> 0
>> savevm_section_start ps2kbd, section_id 39
>> savevm_section_end ps2kbd, section_id 39 -> 0
>> savevm_section_start ps2mouse, section_id 40
>> savevm_section_end ps2mouse, section_id 40 -> 0
>> savevm_section_start pckbd, section_id 41
>> savevm_section_end pckbd, section_id 41 -> 0
>> savevm_section_start vmmouse, section_id 42
>> savevm_section_end vmmouse, section_id 42 -> 0
>> savevm_section_start port92, section_id 43
>> savevm_section_end port92, section_id 43 -> 0
>> savevm_section_start 0000:00:03.0/e1000, section_id 44
>> savevm_section_end 0000:00:03.0/e1000, section_id 44 -> 0
>> savevm_section_skip smbus-eeprom, section_id 45
>> savevm_section_skip smbus-eeprom, section_id 46
>> savevm_section_skip smbus-eeprom, section_id 47
>> savevm_section_skip smbus-eeprom, section_id 48
>> savevm_section_skip smbus-eeprom, section_id 49
>> savevm_section_skip smbus-eeprom, section_id 50
>> savevm_section_skip smbus-eeprom, section_id 51
>> savevm_section_skip smbus-eeprom, section_id 52
>> savevm_section_start acpi_build, section_id 53
>> savevm_section_end acpi_build, section_id 53 -> 0
>> savevm_section_start globalstate, section_id 54
>> migrate_global_state_pre_save saved state: running
>> savevm_section_end globalstate, section_id 54 -> 0
>> migrate_error error=Unable to write to socket: Connection reset by peer
>> migrate_set_state new state failed
>> migration_thread_after_loop
>> migration_block_activation active
>> {"timestamp": {"seconds": 1737127025, "microseconds": 625404}, "event":
>> "RESUME"}
>> migrate_fd_cleanup
>> savevm_state_cleanup
>> qemu-system-x86_64: Unable to write to socket: Connection reset by peer
>>
>>
>> $ /home/fabiano/qemu-system-x86_64 -display none -cpu host -smp 4
>> -machine pc,accel=kvm -object
>> memory-backend-file,id=ram0,size=4G,mem-path=/dev/shm/ram0,share=on -m
>> 4G -machine aux-ram-share=on -incoming tcp:0:44444 -incoming
>> '{"channel-type": "cpr", "addr": { "transport": "socket", "type":
>> "unix", "path": "cpr.sock"}}' -trace loadvm_* -trace cpr_* -trace
>> migration_* -trace migrate_* -monitor stdio
>>
>> cpr_transfer_input cpr.sock
>> cpr_state_load cpr-transfer mode
>> QEMU 9.2.50 monitor - type 'help' for more information
>> cpr_find_fd pc.bios, id 0 returns 15
>> cpr_find_fd pc.rom, id 0 returns 14
>> cpr_find_fd 0000:00:02.0/vga.vram, id 0 returns 13
>> cpr_find_fd 0000:00:02.0/vga.rom, id 0 returns 12
>> cpr_find_fd 0000:00:03.0/e1000.rom, id 0 returns 11
>> cpr_find_fd /rom@etc/acpi/tables, id 0 returns 10
>> cpr_find_fd /rom@etc/table-loader, id 0 returns 8
>> cpr_find_fd /rom@etc/acpi/rsdp, id 0 returns 3
>> migrate_set_state new state setup
>> (qemu) migration_socket_incoming_accepted
>> migration_set_incoming_channel ioc=0x5565cccb8e70 ioctype=qio-channel-socket
>> migrate_set_state new state active
>> loadvm_state_setup
>> qemu-system-x86_64: error while loading state for instance 0x0 of device
>> 'kvm-tpr-opt'
>> migrate_set_state new state failed
>> migrate_error error=load of migration failed: Operation not permitted
>> loadvm_state_cleanup
>> qemu-system-x86_64: load of migration failed: Operation not permitted
>
> Thank-you for the simple example. I reproduced the failure.
> To fix, add "-machine aux-ram-share=on -machine memory-backend=ram0"
> (The previous longer example had the former but lacked the latter).
> Without that, the volatile pc.ram region is still in the mix.
There you go, that kvm-tpr-opt message is almost always indicative of
user error. I think because it's the first vmstate to be loaded.
Nonetheless, we better update the documentation to:
-object memory-backend-file,id=ram0,size=4G,mem-path=/dev/shm/ram0,share=on -m
-4G \
-machine memory-backend=ram0 \
-machine aux-ram-share=on
>
> I have a patch that adds a blocker if volatile ram is present, and would
> have clearly diagnosed this problem. I will submit it now.
Yes, I just tested and it's way better. Although the message asks for
"share=on" and "aux-ram-share=on", which were already there. But there's
not much we can do, basic proficiency with QEMU cmdline is a
prerequisite.
>
> - Steve
