On 10/25/24 4:12 PM, dan tan wrote:
Add qtest cases to exercise main TPM locality functionality
The TPM device emulation is provided by swtpm, which is TCG
TPM 2.0, and TCG TPM TIS compliant. See
https://trustedcomputinggroup.org/wp-content/uploads/TCG_PC_Client_Platform_TPM_Profile_PTP_2.0_r1.03_v22.pdf
https://trustedcomputinggroup.org/wp-content/uploads/TCG_PCClientTPMInterfaceSpecification_TIS__1-3_27_03212013.pdf
The SPI registers are specific to the PowerNV platform
architecture
Signed-off-by: dan tan <dan...@linux.vnet.ibm.com>
---
;
+
+static inline void tpm_reg_writeb(const PnvChip *c,
+ int locl,
+ uint8_t reg,
+ uint8_t val)
+{
+ uint32_t tpm_reg_locl = SPI_TPM_TIS_ADDR | (locl <<
TPM_TIS_LOCALITY_SHIFT);
+
+ spi_access_start(c, false, 1, TPM_WRITE_OP, tpm_reg_locl | reg);
+ spi_write_reg(c, bswap64(val));
spi_write_reg(c, (uint64_t)val << 56);
A #define for the 56 would be good.
+
+static void spi_access_start(const PnvChip *chip,
+ bool n2,
+ uint8_t bytes,
+ uint8_t tpm_op,
+ uint32_t tpm_reg)
+{
+ uint64_t cfg_reg;
+ uint64_t reg_op;
+ uint64_t seq_op = SEQ_OP_REG_BASIC;
+
+ cfg_reg = pnv_spi_tpm_read(chip, SPI_CLK_CFG_REG);
+ if (cfg_reg != CFG_COUNT_COMPARE_1) {
+ pnv_spi_tpm_write(chip, SPI_CLK_CFG_REG, CFG_COUNT_COMPARE_1);
+ }
+ /* bytes - sequencer operation register bits 24:31 */
+ if (n2) {
+ seq_op |= SPI_SHIFT_COUNTER_N2 | (bytes << 0x18);
+ } else {
+ seq_op |= SPI_SHIFT_COUNTER_N1 | (bytes << 0x18);
+ }
+ pnv_spi_tpm_write(chip, SPI_SEQ_OP_REG, seq_op);
+ pnv_spi_tpm_write(chip, SPI_MM_REG, MM_REG_RDR_MATCH);
+ pnv_spi_tpm_write(chip, SPI_CTR_CFG_REG, (uint64_t)0);
+ reg_op = bswap64(tpm_op) | ((uint64_t)tpm_reg << 0x20);
Same #define to use here, maybe called SPI_XMIT_DATA_OP_SHIFT. And one
for the 0x20, maybe called SPI_XMIT_DATA_ADDR_SHIFT. Any reference to a
spec?
(uint64_t)tmp_op << SPI_XMIT_DATA_OP_SHIFT | (uint64_t)(tpm_reg &
0xffffff) << SPI_XMIT_DATA_ADDR_SHIFT;
+ pnv_spi_tpm_write(chip, SPI_XMIT_DATA_REG, reg_op);
+}
+
