Hi Guenter,
On 24/10/24 01:04, Guenter Roeck wrote:
On 10/23/24 20:27, Philippe Mathieu-Daudé wrote:
Hi Guenter,
On 23/10/24 19:24, Guenter Roeck wrote:
Hi,
On Fri, Jun 28, 2024 at 09:01:27AM +0200, Philippe Mathieu-Daudé wrote:
Signed-off-by: Philippe Mathieu-Daudé <phi...@linaro.org>
Reviewed-by: Cédric Le Goater <c...@redhat.com>
---
This patch results in:
[ 5.976133] Waiting for root device /dev/mmcblk0...
[ 6.501462] mmc0: error -38 whilst initialising SD card
[ 7.557473] mmc0: error -38 whilst initialising SD card
... (repeated until session is aborted)
when trying to boot Linux for sifive_u from sd card.
The command used to boot the image is
qemu-system-riscv64 -M sifive_u -m 512M -no-reboot \
-kernel arch/riscv/boot/Image \
-snapshot -drive file=rootfs.ext2,format=raw,if=sd \
-bios default \
-append "root=/dev/mmcblk0 rootwait console=ttySIF0,115200
earlycon" \
-nographic -monitor none
# first bad commit: [da954d0e32444f122a41c24948d4d1c718bf66d4]
hw/sd/sdcard: Add spi_cmd_SEND_CSD/CID handlers (CMD9 & CMD10)
I don't have access to my workstation, but looking at the patch,
maybe the fix is simply:
---
diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index a5d2d929a8a..1594d340a6e 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -1567,7 +1567,7 @@ static sd_rsp_type_t
emmc_cmd_SEND_EXT_CSD(SDState *sd, SDRequest req)
/* CMD9 */
static sd_rsp_type_t spi_cmd_SEND_CSD(SDState *sd, SDRequest req)
{
- if (sd->state != sd_standby_state) {
+ if (sd->state != sd_transfer_state) {
return sd_invalid_state_for_cmd(sd, req);
}
return sd_cmd_to_sendingdata(sd, req, sd_req_get_address(sd, req),
@@ -1586,7 +1586,7 @@ static sd_rsp_type_t sd_cmd_SEND_CSD(SDState
*sd, SDRequest req)
/* CMD10 */
static sd_rsp_type_t spi_cmd_SEND_CID(SDState *sd, SDRequest req)
{
- if (sd->state != sd_standby_state) {
+ if (sd->state != sd_transfer_state) {
return sd_invalid_state_for_cmd(sd, req);
}
return sd_cmd_to_sendingdata(sd, req, sd_req_get_address(sd, req),
---
Is it possible for you to test this snippet?
It must be related, but something else must be wrong. With the above, I get
[ 4.355063] Run /sbin/init as init process
ssi_sd: error: Unexpected response to cmd 13
[ 4.780139] mmc0: SPI card removed
[ 4.785194] EXT4-fs (mmcblk0): shut down requested (2)
[ 4.812689] Starting init: /sbin/init exists but couldn't execute it
(error -5)
[ 4.813248] Run /etc/init as init process
[ 4.825799] init: attempt to access beyond end of device
The state is always 4 when spi_cmd_SEND_CSD() and spi_cmd_SEND_CID()
are called. With more debugging added:
ssi_sd: error: Unexpected response to cmd 13 (arglen expected 4, got 16)
Changing only one of the functions to check against sd_transfer_state
doesn't help either; that brings back the repeated error -38.
Looking at commit 807f6adac37 ("hw/sd/sdcard: Add sd_cmd_SEND_STATUS
handler (CMD13)"), this should fix:
-- >8 --
@@ -1639,7 +1639,7 @@ static sd_rsp_type_t sd_cmd_SEND_STATUS(SDState
*sd, SDRequest req)
}
if (sd_is_spi(sd)) {
- return sd_r2_s;
+ return sd_r1;
}
return sd_req_rca_same(sd, req) ? sd_r1 : sd_r0;
---
But -- why the commit msg didn't mention the spec fix -- the commit
looks correct to me. We might be missing smth from the spec. I'll
have a look during soft freeze. Having a test such the one recently
added in
https://lore.kernel.org/qemu-devel/20241024082735.42324-3-th...@redhat.com/
would help me ;)
Regards,
Phil.
