Here are some more spelling fixes and one fix for code formatting.
Please add them to CVS.
Stefan
Stefan Weil schrieb:
> Here is a collection of some minor patches.
> They only fix spelling in comments.
>
> Regards
> Stefan
Index: disas.c
===================================================================
RCS file: /sources/qemu/qemu/disas.c,v
retrieving revision 1.37
diff -u -b -B -r1.37 disas.c
--- disas.c 9 Apr 2007 15:14:57 -0000 1.37
+++ disas.c 2 Jun 2007 09:32:01 -0000
@@ -134,7 +134,7 @@
}
#endif
-/* Disassemble this for me please... (debugging). 'flags' has teh following
+/* Disassemble this for me please... (debugging). 'flags' has the following
values:
i386 - nonzero means 16 bit code
arm - nonzero means thumb code
Index: exec.c
===================================================================
RCS file: /sources/qemu/qemu/exec.c,v
retrieving revision 1.98
diff -u -b -B -r1.98 exec.c
--- exec.c 30 May 2007 17:25:06 -0000 1.98
+++ exec.c 2 Jun 2007 09:32:04 -0000
@@ -1220,7 +1221,7 @@
{ CPU_LOG_EXEC, "exec",
"show trace before each executed TB (lots of logs)" },
{ CPU_LOG_TB_CPU, "cpu",
- "show CPU state before bloc translation" },
+ "show CPU state before block translation" },
#ifdef TARGET_I386
{ CPU_LOG_PCALL, "pcall",
"show protected mode far calls/returns/exceptions" },
Index: sdl.c
===================================================================
RCS file: /sources/qemu/qemu/sdl.c,v
retrieving revision 1.38
diff -u -b -B -r1.38 sdl.c
--- sdl.c 1 May 2007 01:34:14 -0000 1.38
+++ sdl.c 2 Jun 2007 09:32:06 -0000
@@ -407,7 +407,8 @@
case SDLK_END: keysym = QEMU_KEY_END; break;
case SDLK_PAGEUP: keysym = QEMU_KEY_PAGEUP; break;
case SDLK_PAGEDOWN: keysym = QEMU_KEY_PAGEDOWN; break;
- case SDLK_BACKSPACE: keysym = QEMU_KEY_BACKSPACE; break; case SDLK_DELETE: keysym = QEMU_KEY_DELETE; break;
+ case SDLK_BACKSPACE: keysym = QEMU_KEY_BACKSPACE; break;
+ case SDLK_DELETE: keysym = QEMU_KEY_DELETE; break;
default: break;
}
}
Index: darwin-user/mmap.c
===================================================================
RCS file: /sources/qemu/qemu/darwin-user/mmap.c,v
retrieving revision 1.1
diff -u -b -B -r1.1 mmap.c
--- darwin-user/mmap.c 18 Jan 2007 20:06:33 -0000 1.1
+++ darwin-user/mmap.c 2 Jun 2007 09:32:09 -0000
@@ -199,7 +199,7 @@
if (!(flags & MAP_FIXED)) {
#if defined(__alpha__) || defined(__sparc__) || defined(__x86_64__)
- /* tell the kenel to search at the same place as i386 */
+ /* tell the kernel to search at the same place as i386 */
if (host_start == 0) {
host_start = last_start;
last_start += HOST_PAGE_ALIGN(len);
Index: hw/cirrus_vga.c
===================================================================
RCS file: /sources/qemu/qemu/hw/cirrus_vga.c,v
retrieving revision 1.24
diff -u -b -B -r1.24 cirrus_vga.c
--- hw/cirrus_vga.c 2 Apr 2007 01:10:46 -0000 1.24
+++ hw/cirrus_vga.c 2 Jun 2007 09:32:10 -0000
@@ -2784,7 +2786,7 @@
case 0x09:
case 0x0c:
case 0x0d:
- case 0x12: /* veritcal display end */
+ case 0x12: /* vertical display end */
s->cr[s->cr_index] = val;
break;
Index: hw/cuda.c
===================================================================
RCS file: /sources/qemu/qemu/hw/cuda.c,v
retrieving revision 1.12
diff -u -b -B -r1.12 cuda.c
--- hw/cuda.c 7 Apr 2007 18:14:41 -0000 1.12
+++ hw/cuda.c 2 Jun 2007 09:32:10 -0000
@@ -445,9 +445,9 @@
cuda_update_irq(s);
} else {
if (!(s->last_b & TIP)) {
- /* handle end of host to cuda transfert */
+ /* handle end of host to cuda transfer */
packet_received = (s->data_out_index > 0);
- /* always an IRQ at the end of transfert */
+ /* always an IRQ at the end of transfer */
s->ifr |= SR_INT;
cuda_update_irq(s);
}
Index: hw/ne2000.c
===================================================================
RCS file: /sources/qemu/qemu/hw/ne2000.c,v
retrieving revision 1.25
diff -u -b -B -r1.25 ne2000.c
--- hw/ne2000.c 7 Apr 2007 18:14:41 -0000 1.25
+++ hw/ne2000.c 2 Jun 2007 09:32:14 -0000
@@ -325,7 +325,7 @@
s->cmd = val;
if (!(val & E8390_STOP)) { /* START bit makes no sense on RTL8029... */
s->isr &= ~ENISR_RESET;
- /* test specific case: zero length transfert */
+ /* test specific case: zero length transfer */
if ((val & (E8390_RREAD | E8390_RWRITE)) &&
s->rcnt == 0) {
s->isr |= ENISR_RDC;
@@ -340,7 +340,7 @@
if (index + s->tcnt <= NE2000_PMEM_END) {
qemu_send_packet(s->vc, s->mem + index, s->tcnt);
}
- /* signal end of transfert */
+ /* signal end of transfer */
s->tsr = ENTSR_PTX;
s->isr |= ENISR_TX;
s->cmd &= ~E8390_TRANS;
@@ -550,7 +550,7 @@
if (s->rcnt <= len) {
s->rcnt = 0;
- /* signal end of transfert */
+ /* signal end of transfer */
s->isr |= ENISR_RDC;
ne2000_update_irq(s);
} else {
Index: hw/scsi-disk.c
===================================================================
RCS file: /sources/qemu/qemu/hw/scsi-disk.c,v
retrieving revision 1.14
diff -u -b -B -r1.14 scsi-disk.c
--- hw/scsi-disk.c 28 Apr 2007 20:47:59 -0000 1.14
+++ hw/scsi-disk.c 2 Jun 2007 09:32:15 -0000
@@ -489,7 +489,7 @@
is_write = 1;
break;
case 0x35:
- DPRINTF("Syncronise cache (sector %d, count %d)\n", lba, len);
+ DPRINTF("Synchronise cache (sector %d, count %d)\n", lba, len);
bdrv_flush(s->bdrv);
break;
case 0x43:
Index: hw/vga.c
===================================================================
RCS file: /sources/qemu/qemu/hw/vga.c,v
retrieving revision 1.51
diff -u -b -B -r1.51 vga.c
--- hw/vga.c 13 May 2007 13:26:49 -0000 1.51
+++ hw/vga.c 2 Jun 2007 09:32:16 -0000
@@ -346,7 +351,7 @@
case 0x09:
case 0x0c:
case 0x0d:
- case 0x12: /* veritcal display end */
+ case 0x12: /* vertical display end */
s->cr[s->cr_index] = val;
break;
default:
Index: linux-user/elfload.c
===================================================================
RCS file: /sources/qemu/qemu/linux-user/elfload.c,v
retrieving revision 1.41
diff -u -b -B -r1.41 elfload.c
--- linux-user/elfload.c 13 May 2007 13:58:00 -0000 1.41
+++ linux-user/elfload.c 2 Jun 2007 09:32:17 -0000
@@ -799,7 +799,7 @@
#endif
if (interp_elf_ex->e_type == ET_DYN) {
- /* in order to avoid harcoding the interpreter load
+ /* in order to avoid hardcoding the interpreter load
address in qemu, we allocate a big enough memory zone */
error = target_mmap(0, INTERP_MAP_SIZE,
PROT_NONE, MAP_PRIVATE | MAP_ANON,
@@ -1191,7 +1191,7 @@
base, as well as whatever program they might try to exec. This
is because the brk will follow the loader, and is not movable. */
/* NOTE: for qemu, we do a big mmap to get enough space
- without harcoding any address */
+ without hardcoding any address */
error = target_mmap(0, ET_DYN_MAP_SIZE,
PROT_NONE, MAP_PRIVATE | MAP_ANON,
-1, 0);
Index: target-i386/translate.c
===================================================================
RCS file: /sources/qemu/qemu/target-i386/translate.c,v
retrieving revision 1.64
diff -u -b -B -r1.64 translate.c
--- target-i386/translate.c 27 May 2007 19:39:27 -0000 1.64
+++ target-i386/translate.c 2 Jun 2007 09:32:21 -0000
@@ -6431,7 +6432,7 @@
opc_ptr = opc_buf + opc_buf_len;
/* live_flags contains the flags needed by the next instructions
- in the code. At the end of the bloc, we consider that all the
+ in the code. At the end of the block, we consider that all the
flags are live. */
live_flags = CC_OSZAPC;
while (opc_ptr > opc_buf) {
