On 2012-04-04 15:55, Maksim Kozlov wrote:
> 04.04.2012 14:08, Dmitry Zhurikhin пишет:
>> Reset the system when 1 is written to SWRESET register
>>
>> Signed-off-by: Dmitry Zhurikhin<z...@ispras.ru>
>> ---
>> hw/exynos4210_pmu.c | 11 +++++++++++
>> 1 files changed, 11 insertions(+), 0 deletions(-)
>>
>> diff --git a/hw/exynos4210_pmu.c b/hw/exynos4210_pmu.c
>> index c12d750..edf6e34 100644
>> --- a/hw/exynos4210_pmu.c
>> +++ b/hw/exynos4210_pmu.c
>> @@ -25,6 +25,7 @@
>> */
>>
>> #include "sysbus.h"
>> +#include "sysemu.h"
>>
>> #ifndef DEBUG_PMU
>> #define DEBUG_PMU 0
>> @@ -422,6 +423,16 @@ static void exynos4210_pmu_write(void *opaque,
>> target_phys_addr_t offset,
>> if (reg_p->offset == offset) {
>> PRINT_DEBUG_EXTEND("%s<0x%04x> <- 0x%04x\n", reg_p->name,
>> (uint32_t)offset, (uint32_t)val);
>> + switch (offset) {
>> + case SWRESET:
>> + if (val& 1) {
>> + qemu_system_reset_request();
>> + }
>> + break;
>> + default:
>> + /* Nothing */
>> + break;
>> + }
>> s->reg[i] = val;
>> return;
>> }
> It's not quite well. At first, when you do reset, appropriate status
> must be set in RST_STAT register. At second, not all registers in PMU
> should be set in default value after reset, so you should change PMU
> reset function for handling different resets (see spec) So, this
> functionality should be wrote more carefully
Well, this is the case when there is a need to modify booting procedure
depending on the values of these registers. I haven't found any such
code in the current kernel. As I now remember saving their values was
indeed important when we were trying to use an U-Boot bootloader. But
as long as we are sticking with QEMU bootloader it doesn't matter.
Anyway this information is unfortunately absent in Exynos4210 public
documentation.
>
> And use #define for registers and fields of the registers. It's more
> clearly, as for me.
As you say.
>
> Regards,
> MK
Regards,
Dmitry
