Hi Eric,
On Mon, May 20, 2024 at 12:37:55PM +0200, Eric Auger wrote:
> Hi Mostafa,
>
> On 4/29/24 05:23, Mostafa Saleh wrote:
> > IOMMUTLBEvent only understands IOVA, for stage-2 only SMMUs keep
> > the implementation, while only notify for stage-1 invalidation
> > in case of nesting.
> >
> > Signed-off-by: Mostafa Saleh <[email protected]>
> > ---
> > hw/arm/smmuv3.c | 23 +++++++++++++++--------
> > hw/arm/trace-events | 2 +-
> > 2 files changed, 16 insertions(+), 9 deletions(-)
> >
> > diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c
> > index e0fd494646..96d07234fe 100644
> > --- a/hw/arm/smmuv3.c
> > +++ b/hw/arm/smmuv3.c
> > @@ -1051,7 +1051,7 @@ static void smmuv3_notify_iova(IOMMUMemoryRegion *mr,
> > IOMMUNotifier *n,
> > int asid, int vmid,
> > dma_addr_t iova, uint8_t tg,
> > - uint64_t num_pages)
> > + uint64_t num_pages, int stage)
> add the new param in the doc comment above
> > {
> > SMMUDevice *sdev = container_of(mr, SMMUDevice, iommu);
> > IOMMUTLBEvent event;
> > @@ -1075,14 +1075,21 @@ static void smmuv3_notify_iova(IOMMUMemoryRegion
> > *mr,
> > return;
> > }
> >
> > - if (STAGE1_SUPPORTED(s)) {
> > + /*
> > + * IOMMUTLBEvent only understands IOVA, for stage-2 only SMMUs
> > + * keep the implementation, while only notify for stage-1
> > + * invalidation in case of nesting.
> > + */
> > + if (stage == SMMU_STAGE_1) {
> > tt = select_tt(cfg, iova);
> > if (!tt) {
> > return;
> > }
> > granule = tt->granule_sz;
> > - } else {
> > + } else if (!STAGE1_SUPPORTED(s)) {
> I don't get why you don't test stage == SMMU_STAGE_2 instead
> in each block shouldn't you test if the corresponding state of supported?
> > granule = cfg->s2cfg.granule_sz;
> > + } else {
> I don't really understand the logic here. Please can you comment each case?
The current implementation will call memory_region_notify_iommu_one()
from smmuv3_notify_iova() for stage-1 or stage-2 based on which one is supported
and in each case this address is considered an “IOVA”.
However, with nested translation memory_region_notify_iommu_one() doesn’t
distinguish
between stage-1 and stage-2, so only stage-1 is considered “IOVA”.
And the implementation basically as follows:
1) If the translation was stage-1, it’s an IOVA and
memory_region_notify_iommu_one() is called.
2) If stage-1 is not supported (this is an stage-2 only instance) maintain
the old behaviour by calling memory_region_notify_iommu_one()
3) This leaves us with stage-1 being supported and this is a stage-2
translation, where the notification would be ignored, I think in
this case if the SW configured only for stage-2 it would expect
it to behave as 2) :/
Not sure how to fix that, maybe only ignore stage-2 if it was in a nested STE,
or just or always ignore stage-2?
Thanks,
Mostafa
>
> Thanks
>
> Eric
> > + return;
> > }
> >
> > } else {
> > @@ -1101,7 +1108,7 @@ static void smmuv3_notify_iova(IOMMUMemoryRegion *mr,
> > /* invalidate an asid/vmid/iova range tuple in all mr's */
> > static void smmuv3_inv_notifiers_iova(SMMUState *s, int asid, int vmid,
> > dma_addr_t iova, uint8_t tg,
> > - uint64_t num_pages)
> > + uint64_t num_pages, int stage)
> > {
> > SMMUDevice *sdev;
> >
> > @@ -1110,10 +1117,10 @@ static void smmuv3_inv_notifiers_iova(SMMUState *s,
> > int asid, int vmid,
> > IOMMUNotifier *n;
> >
> > trace_smmuv3_inv_notifiers_iova(mr->parent_obj.name, asid, vmid,
> > - iova, tg, num_pages);
> > + iova, tg, num_pages, stage);
> >
> > IOMMU_NOTIFIER_FOREACH(n, mr) {
> > - smmuv3_notify_iova(mr, n, asid, vmid, iova, tg, num_pages);
> > + smmuv3_notify_iova(mr, n, asid, vmid, iova, tg, num_pages,
> > stage);
> > }
> > }
> > }
> > @@ -1144,7 +1151,7 @@ static void smmuv3_range_inval(SMMUState *s, Cmd
> > *cmd, SMMUStage stage)
> >
> > if (!tg) {
> > trace_smmuv3_range_inval(vmid, asid, addr, tg, 1, ttl, leaf,
> > stage);
> > - smmuv3_inv_notifiers_iova(s, asid, vmid, addr, tg, 1);
> > + smmuv3_inv_notifiers_iova(s, asid, vmid, addr, tg, 1, stage);
> > if (stage == SMMU_STAGE_1) {
> > smmu_iotlb_inv_iova(s, asid, vmid, addr, tg, 1, ttl);
> > } else {
> > @@ -1167,7 +1174,7 @@ static void smmuv3_range_inval(SMMUState *s, Cmd
> > *cmd, SMMUStage stage)
> > num_pages = (mask + 1) >> granule;
> > trace_smmuv3_range_inval(vmid, asid, addr, tg, num_pages,
> > ttl, leaf, stage);
> > - smmuv3_inv_notifiers_iova(s, asid, vmid, addr, tg, num_pages);
> > + smmuv3_inv_notifiers_iova(s, asid, vmid, addr, tg, num_pages,
> > stage);
> > if (stage == SMMU_STAGE_1) {
> > smmu_iotlb_inv_iova(s, asid, vmid, addr, tg, num_pages, ttl);
> > } else {
> > diff --git a/hw/arm/trace-events b/hw/arm/trace-events
> > index 593cc571da..be6c8f720b 100644
> > --- a/hw/arm/trace-events
> > +++ b/hw/arm/trace-events
> > @@ -55,7 +55,7 @@ smmuv3_cmdq_tlbi_s12_vmid(int vmid) "vmid=%d"
> > smmuv3_config_cache_inv(uint32_t sid) "Config cache INV for sid=0x%x"
> > smmuv3_notify_flag_add(const char *iommu) "ADD SMMUNotifier node for iommu
> > mr=%s"
> > smmuv3_notify_flag_del(const char *iommu) "DEL SMMUNotifier node for iommu
> > mr=%s"
> > -smmuv3_inv_notifiers_iova(const char *name, int asid, int vmid, uint64_t
> > iova, uint8_t tg, uint64_t num_pages) "iommu mr=%s asid=%d vmid=%d
> > iova=0x%"PRIx64" tg=%d num_pages=0x%"PRIx64
> > +smmuv3_inv_notifiers_iova(const char *name, int asid, int vmid, uint64_t
> > iova, uint8_t tg, uint64_t num_pages, int stage) "iommu mr=%s asid=%d
> > vmid=%d iova=0x%"PRIx64" tg=%d num_pages=0x%"PRIx64" stage=%d"
> >
> > # strongarm.c
> > strongarm_uart_update_parameters(const char *label, int speed, char
> > parity, int data_bits, int stop_bits) "%s speed=%d parity=%c data=%d
> > stop=%d"
>
