piix acpi interface suffers from the following 2 issues: 1. - delete device a - quickly add device b in another slot
if we do this before guest reads the down register, the down event is discarded and device will never be deleted. 2. - delete device a - quickly reset before guest can respond interrupt is reset and guest will never eject the device. To fix this, we implement two changes: 1. Add two new registers: CLR_UP CLR_DOWN bios will now write to these the value it read from UP/DOWN 2. on reset, remove all devices which have DOWN bit set For compatibility with old guests, we also clear the DOWN bit on write to EJ0 for a device. Signed-off-by: Michael S. Tsirkin <m...@redhat.com> Warning: untested. Posting for early feedback/flames. --- hw/acpi_piix4.c | 72 ++++++++++++++++++++++++++++++++++++++++++++---------- 1 files changed, 58 insertions(+), 14 deletions(-) diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c index 797ed24..a155358 100644 --- a/hw/acpi_piix4.c +++ b/hw/acpi_piix4.c @@ -43,6 +43,8 @@ #define PCI_BASE 0xae00 #define PCI_EJ_BASE 0xae08 #define PCI_RMV_BASE 0xae0c +#define PCI_CLR_UP_BASE 0xae10 +#define PCI_CLR_DOWN_BASE 0xae14 #define PIIX4_PCI_HOTPLUG_STATUS 2 @@ -287,6 +289,25 @@ static void piix4_update_hotplug(PIIX4PMState *s) } } +static void acpi_piix_eject_slot(PIIX4PMState *s, unsigned slots) +{ + DeviceState *qdev, *next; + BusState *bus = qdev_get_parent_bus(&s->dev.qdev); + int slot = ffs(slots) - 1; + + /* Clear down register here too - this is good for + * compatibility with old guests which do not have CLR_DOWN. */ + s->pci0_status.down &= ~(1U << slot); + + QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) { + PCIDevice *dev = PCI_DEVICE(qdev); + PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev); + if (PCI_SLOT(dev->devfn) == slot && !pc->no_hotplug) { + qdev_free(qdev); + } + } +} + static void piix4_reset(void *opaque) { PIIX4PMState *s = opaque; @@ -302,6 +323,19 @@ static void piix4_reset(void *opaque) pci_conf[0x5B] = 0x02; } piix4_update_hotplug(s); + /* + * Guest lost remove events if any. + * As it's being reset it's safe to remove the device now. + */ + while (s->pci0_status.down) { + acpi_piix_eject_slot(s, s->pci0_status.down); + } + /* + * Guest lost add events if any. + * As it's being reset and will rescan the bus we cann discard + * past events now. + */ + s->pci0_status.up = 0; } static void piix4_powerdown(void *opaque, int irq, int power_failing) @@ -490,22 +524,31 @@ static uint32_t pciej_read(void *opaque, uint32_t addr) static void pciej_write(void *opaque, uint32_t addr, uint32_t val) { - BusState *bus = opaque; - DeviceState *qdev, *next; - int slot = ffs(val) - 1; + PIIX4PMState *s = opaque; - QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) { - PCIDevice *dev = PCI_DEVICE(qdev); - PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev); - if (PCI_SLOT(dev->devfn) == slot && !pc->no_hotplug) { - qdev_free(qdev); - } + if (val) { + acpi_piix_eject_slot(s, val); } - PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val); } +static void pci_clr_up_write(void *opaque, uint32_t addr, uint32_t val) +{ + PIIX4PMState *s = opaque; + s->pci0_status.up &= ~val; + + PIIX4_DPRINTF("pci_clr_up write %x <== %d\n", addr, val); +} + +static void pci_clr_down_write(void *opaque, uint32_t addr, uint32_t val) +{ + PIIX4PMState *s = opaque; + s->pci0_status.down &= ~val; + + PIIX4_DPRINTF("pci_clr_down write %x <== %d\n", addr, val); +} + static uint32_t pcirmv_read(void *opaque, uint32_t addr) { PIIX4PMState *s = opaque; @@ -532,12 +575,15 @@ static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s) register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, pci0_status); register_ioport_read(PCI_BASE, 8, 4, pcihotplug_read, pci0_status); - register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus); - register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, bus); + register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, s); + register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, s); register_ioport_write(PCI_RMV_BASE, 4, 4, pcirmv_write, s); register_ioport_read(PCI_RMV_BASE, 4, 4, pcirmv_read, s); + register_ioport_write(PCI_CLR_UP_BASE, 4, 4, pci_clr_up_write, s); + register_ioport_write(PCI_CLR_DOWN_BASE, 4, 4, pci_clr_down_write, s); + pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev); } @@ -567,8 +613,6 @@ static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, return 0; } - s->pci0_status.up = 0; - s->pci0_status.down = 0; if (state == PCI_HOTPLUG_ENABLED) { enable_device(s, slot); } else { -- 1.7.9.111.gf3fb0