Le jeudi 4 janvier 2024 à 14:33, Philippe Mathieu-Daudé <phi...@linaro.org> a
écrit :
> On 28/12/23 17:19, Inès Varhol wrote:
>
> > Signed-off-by: Arnaud Minier arnaud.min...@telecom-paris.fr
> > Signed-off-by: Inès Varhol ines.var...@telecom-paris.fr
> > ---
> > tests/qtest/meson.build | 5 +
> > tests/qtest/stm32l4x5_exti-test.c | 596 ++++++++++++++++++++++++++++++
> > 2 files changed, 601 insertions(+)
> > create mode 100644 tests/qtest/stm32l4x5_exti-test.c
>
>
> Once the SoC parentship fixed in based series, this patch
> requires:
>
> -- >8 --
>
> diff --git a/tests/qtest/stm32l4x5_exti-test.c
> b/tests/qtest/stm32l4x5_exti-test.c
> index 60c8297246..543199cd4d 100644
> --- a/tests/qtest/stm32l4x5_exti-test.c
> +++ b/tests/qtest/stm32l4x5_exti-test.c
> @@ -287,4 +287,3 @@ static void test_edge_selector(void)
> /* Configure EXTI line 0 irq on rising edge /
> - qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti",
> - NULL, 0, 1);
> + qtest_set_irq_in(global_qtest, "/machine/soc/exti", NULL, 0, 1);
> exti_writel(EXTI_IMR1, 0x00000001);
> @@ -294,4 +293,3 @@ static void test_edge_selector(void)
> / Test that an irq is raised on rising edge only /
> - qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti",
> - NULL, 0, 0);
> + qtest_set_irq_in(global_qtest, "/machine/soc/exti", NULL, 0, 0);
>
> @@ -301,4 +299,3 @@ static void test_edge_selector(void)
>
> - qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti",
> - NULL, 0, 1);
> + qtest_set_irq_in(global_qtest, "/machine/soc/exti", NULL, 0, 1);
>
> @@ -316,4 +313,3 @@ static void test_edge_selector(void)
> / Configure EXTI line 0 irq on falling edge /
> - qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti",
> - NULL, 0, 0);
> + qtest_set_irq_in(global_qtest, "/machine/soc/exti", NULL, 0, 0);
> exti_writel(EXTI_IMR1, 0x00000001);
> @@ -323,4 +319,3 @@ static void test_edge_selector(void)
> / Test that an irq is raised on falling edge only /
> - qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti",
> - NULL, 0, 1);
> + qtest_set_irq_in(global_qtest, "/machine/soc/exti", NULL, 0, 1);
>
> @@ -330,4 +325,3 @@ static void test_edge_selector(void)
>
> - qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti",
> - NULL, 0, 0);
> + qtest_set_irq_in(global_qtest, "/machine/soc/exti", NULL, 0, 0);
>
> @@ -350,4 +344,3 @@ static void test_edge_selector(void)
> / Test that an irq is raised on rising and falling edge /
> - qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti",
> - NULL, 0, 1);
> + qtest_set_irq_in(global_qtest, "/machine/soc/exti", NULL, 0, 1);
>
> @@ -357,4 +350,3 @@ static void test_edge_selector(void)
>
> - qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti",
> - NULL, 0, 0);
> + qtest_set_irq_in(global_qtest, "/machine/soc/exti", NULL, 0, 0);
>
> @@ -377,4 +369,3 @@ static void test_edge_selector(void)
> / Test that no irq is raised /
> - qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti",
> - NULL, 0, 1);
> + qtest_set_irq_in(global_qtest, "/machine/soc/exti", NULL, 0, 1);
>
> @@ -384,4 +375,3 @@ static void test_edge_selector(void)
>
> - qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti",
> - NULL, 0, 0);
> + qtest_set_irq_in(global_qtest, "/machine/soc/exti", NULL, 0, 0);
>
> @@ -500,4 +490,3 @@ static void test_masked_interrupt(void)
> / Simulate rising edge from GPIO line 1 /
> - qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti",
> - NULL, 1, 1);
> + qtest_set_irq_in(global_qtest, "/machine/soc/exti", NULL, 1, 1);
>
> @@ -550,4 +539,3 @@ static void test_interrupt(void)
> / Simulate rising edge from GPIO line 1 */
> - qtest_set_irq_in(global_qtest, "/machine/unattached/device[0]/exti",
> - NULL, 1, 1);
> + qtest_set_irq_in(global_qtest, "/machine/soc/exti", NULL, 1, 1);
> ---
>
> Note you could use a helper to ease readability:
>
> static void exti_set_irq(int num, int lvl)
> {
> qtest_set_irq_in(global_qtest, "/machine/soc/exti", NULL, num, lvl);
> }
>
> Tested-by: Philippe Mathieu-Daudé phi...@linaro.org
Ok thank you a lot !
And yes, we'll swap the 2nd and 3rd commit as you said.
