Markus Armbruster <arm...@redhat.com> 于2023年11月30日周四 09:40写道：
>
> Sam Li <faithilike...@gmail.com> writes:
>
> > To configure the zoned format feature on the qcow2 driver, it
> > requires settings as: the device size, zone model, zone size,
> > zone capacity, number of conventional zones, limits on zone
> > resources (max append bytes, max open zones, and max_active_zones).
> >
> > To create a qcow2 image with zoned format feature, use command like
> > this:
> > $path/to/qemu-img create -f qcow2 zbc.qcow2 -o size=768M
>
> I'd omit $path/to/
>
> > -o zone.size=64M -o zone.capacity=64M -o zone.conventional_zones=0
> > -o zone.max_append_bytes=4096 -o zone.max_open_zones=10
> > -o zone.max_active_zones=12 -o zone.mode=host-managed
>
> Suggest to add \ like this:
>
> qemu-img create -f qcow2 zbc.qcow2 -o size=768M \
> -o zone.size=64M -o zone.capacity=64M -o zone.conventional_zones=0 \
> -o zone.max_append_bytes=4096 -o zone.max_open_zones=10 \
> -o zone.max_active_zones=12 -o zone.mode=host-managed
>
> >
> > Signed-off-by: Sam Li <faithilike...@gmail.com>
>
> [...]
>
> > diff --git a/qapi/block-core.json b/qapi/block-core.json
> > index ca390c5700..ef98dc83a0 100644
> > --- a/qapi/block-core.json
> > +++ b/qapi/block-core.json
> > @@ -5038,6 +5038,64 @@
> > { 'enum': 'Qcow2CompressionType',
> > 'data': [ 'zlib', { 'name': 'zstd', 'if': 'CONFIG_ZSTD' } ] }
> >
> > +##
> > +# @Qcow2ZoneModel:
> > +#
> > +# Zoned device model used in qcow2 image file
> > +#
> > +# @host-managed: host-managed model only allows sequential write over the
>
> Suggest "the host-managed model ..."
>
> > +# device zones
> > +#
> > +# Since 8.2
> > +##
> > +{ 'enum': 'Qcow2ZoneModel',
> > + 'data': [ 'host-managed'] }
> > +
> > +##
> > +# @Qcow2ZoneHostManaged:
> > +#
> > +# The host-managed zone model. It only allows sequential writes.
> > +#
> > +# @size: Total number of bytes within zones
> > +#
> > +# @capacity: The number of usable logical blocks within zones
> > +# in bytes. A zone capacity is always smaller or equal to the
> > +# zone size
> > +#
> > +# @conventional-zones: The number of conventional zones of the
> > +# zoned device
> > +#
> > +# @max-open-zones: The maximal number of open zones
> > +#
> > +# @max-active-zones: The maximal number of zones in the implicit
> > +# open, explicit open or closed state
> > +#
> > +# @max-append-bytes: The maximal number of bytes of a zone
> > +# append request that can be issued to the device. It must be
> > +# 512-byte aligned
>
> Missing period at the end.
>
> For all the optional members: what's the default?
The default for optional members is 0. When max-open-zones and
max-active-zones are 0, it implies no limit on zone resources.
>
> > +#
> > +# Since 8.2
> > +##
> > +{ 'struct': 'Qcow2ZoneHostManaged',
> > + 'data': { '*size': 'size',
> > + '*capacity': 'size',
> > + '*conventional-zones': 'uint32',
> > + '*max-open-zones': 'uint32',
> > + '*max-active-zones': 'uint32',
> > + '*max-append-bytes': 'uint32' } }
>
> Why isn't @max-append-bytes 'size'? It's a byte count...
>
> > +
> > +##
> > +# @Qcow2ZoneCreateOptions:
> > +#
> > +# The zone device model for the qcow2 image.
> > +#
> > +# Since 8.2
> > +##
> > +{ 'union': 'Qcow2ZoneCreateOptions',
> > + 'base': { 'mode': 'Qcow2ZoneModel' },
> > + 'discriminator': 'mode',
> > + 'data': { 'host-managed': 'Qcow2ZoneHostManaged' } }
> > +
> > ##
> > # @BlockdevCreateOptionsQcow2:
> > #
> > @@ -5080,6 +5138,8 @@
> > # @compression-type: The image cluster compression method
> > # (default: zlib, since 5.1)
> > #
> > +# @zone: @Qcow2ZoneCreateOptions. The zone device model modes (since 8.2)
>
> Don't put the type into the description like that, because it comes out
> like
>
> "zone": "Qcow2ZoneCreateOptions" (optional)
> "Qcow2ZoneCreateOptions". The zone device model modes (since 8.2)
>
> in formatted documentation.
>
> Let's spell out the default: the device is not zoned.
>
> > +#
> > # Since: 2.12
> > ##
> > { 'struct': 'BlockdevCreateOptionsQcow2',
> > @@ -5096,7 +5156,8 @@
> > '*preallocation': 'PreallocMode',
> > '*lazy-refcounts': 'bool',
> > '*refcount-bits': 'int',
> > - '*compression-type':'Qcow2CompressionType' } }
> > + '*compression-type':'Qcow2CompressionType',
> > + '*zone': 'Qcow2ZoneCreateOptions' } }
> >
> > ##
> > # @BlockdevCreateOptionsQed:
>
