Allow the VIA IDE controller to switch between both legacy and native modes by
calling pci_ide_update_mode() to reconfigure the device whenever PCI_CLASS_PROG
is updated.
This patch moves the initial setting of PCI_CLASS_PROG from via_ide_realize() to
via_ide_reset(), and removes the direct setting of PCI_INTERRUPT_PIN during PCI
bus reset since this is now managed by pci_ide_update_mode(). This ensures that
the device configuration is always consistent with respect to the currently
selected mode.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayl...@ilande.co.uk>
Tested-by: BALATON Zoltan <bala...@eik.bme.hu>
Tested-by: Bernhard Beschow <shen...@gmail.com>
---
hw/ide/via.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/hw/ide/via.c b/hw/ide/via.c
index 87b134083a..0cb65c8a3d 100644
--- a/hw/ide/via.c
+++ b/hw/ide/via.c
@@ -28,6 +28,7 @@
#include "hw/pci/pci.h"
#include "migration/vmstate.h"
#include "qemu/module.h"
+#include "qemu/range.h"
#include "sysemu/dma.h"
#include "hw/isa/vt82c686.h"
#include "hw/ide/pci.h"
@@ -128,11 +129,14 @@ static void via_ide_reset(DeviceState *dev)
ide_bus_reset(&d->bus[i]);
}
+ pci_config_set_prog_interface(pci_conf, 0x8a); /* legacy mode */
+ pci_ide_update_mode(d);
+
pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_WAIT);
pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
PCI_STATUS_DEVSEL_MEDIUM);
- pci_set_long(pci_conf + PCI_INTERRUPT_LINE, 0x0000010e);
+ pci_set_byte(pci_conf + PCI_INTERRUPT_LINE, 0xe);
/* IDE chip enable, IDE configuration 1/2, IDE FIFO Configuration*/
pci_set_long(pci_conf + 0x40, 0x0a090600);
@@ -154,6 +158,18 @@ static void via_ide_reset(DeviceState *dev)
pci_set_long(pci_conf + 0xc0, 0x00020001);
}
+static void via_ide_cfg_write(PCIDevice *pd, uint32_t addr,
+ uint32_t val, int len)
+{
+ PCIIDEState *d = PCI_IDE(pd);
+
+ pci_default_write_config(pd, addr, val, len);
+
+ if (range_covers_byte(addr, len, PCI_CLASS_PROG)) {
+ pci_ide_update_mode(d);
+ }
+}
+
static void via_ide_realize(PCIDevice *dev, Error **errp)
{
PCIIDEState *d = PCI_IDE(dev);
@@ -161,7 +177,6 @@ static void via_ide_realize(PCIDevice *dev, Error **errp)
uint8_t *pci_conf = dev->config;
int i;
- pci_config_set_prog_interface(pci_conf, 0x8a); /* legacy mode */
pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
dev->wmask[PCI_INTERRUPT_LINE] = 0;
dev->wmask[PCI_CLASS_PROG] = 5;
@@ -216,6 +231,7 @@ static void via_ide_class_init(ObjectClass *klass, void
*data)
/* Reason: only works as function of VIA southbridge */
dc->user_creatable = false;
+ k->config_write = via_ide_cfg_write;
k->realize = via_ide_realize;
k->exit = via_ide_exitfn;
k->vendor_id = PCI_VENDOR_ID_VIA;
--
2.39.2
