On Sat, Feb 15, 2025 at 03:25:14PM +0900, Akihiko Odaki wrote:
> Hi Michael,
>
> It has been a while since this series was reviewed by maintainers of
> relevant architectures. Can you check if this series is ready to pull?
>
> Regards,
> Akihiko Odaki
Yes, it's tagged, will be in the next pull.
> On 2025/01/16 18:00, Akihiko Odaki wrote:
> > Supersedes: <20240714-rombar-v2-0-af1504ef5...@daynix.com>
> > ("[PATCH v2 0/4] hw/pci: Convert rom_bar into OnOffAuto")
> >
> > I submitted a RFC series[1] to add support for SR-IOV emulation to
> > virtio-net-pci. During the development of the series, I fixed some
> > trivial bugs and made improvements that I think are independently
> > useful. This series extracts those fixes and improvements from the RFC
> > series.
> >
> > [1]: https://patchew.org/QEMU/20231210-sriov-v2-0-b959e8a6d...@daynix.com/
> >
> > Signed-off-by: Akihiko Odaki <akihiko.od...@daynix.com>
> > ---
> > Changes in v20:
> > - Use qdev_is_realized().
> > - Link to v19:
> > https://lore.kernel.org/r/20250109-reuse-v19-0-f541e82ca...@daynix.com
> >
> > Changes in v19:
> > - Avoided inling pci_set_power().
> > - Link to v18:
> > https://lore.kernel.org/r/20250104-reuse-v18-0-c349eafd8...@daynix.com
> >
> > Changes in v18:
> > - Rebased.
> > - Link to v17:
> > https://lore.kernel.org/r/20241022-reuse-v17-0-bd7c13323...@daynix.com
> >
> > Changes in v17:
> > - Added patch "pcie_sriov: Ensure VF addr does not overflow".
> > - Changed not to link VF with sPAPR DRC.
> > - Asserted pci_is_vf() when zpci is not found. (Cédric Le Goater)
> > - Link to v16:
> > https://lore.kernel.org/r/20240913-reuse-v16-0-d016b4b4f...@daynix.com
> >
> > Changes in v16:
> > - Added patch "s390x/pci: Avoid creating zpci for VFs".
> > - Added patch "s390x/pci: Allow plugging SR-IOV devices".
> > - Link to v15:
> > https://lore.kernel.org/r/20240823-reuse-v15-0-eddcb960e...@daynix.com
> >
> > Changes in v15:
> > - Fixed variable shadowing in patch
> > "pcie_sriov: Remove num_vfs from PCIESriovPF"
> > - Link to v14:
> > https://lore.kernel.org/r/20240813-reuse-v14-0-4c15bc6ee...@daynix.com
> >
> > Changes in v14:
> > - Dropped patch "pcie_sriov: Ensure VF function number does not
> > overflow" as I found the restriction it imposes is unnecessary.
> > - Link to v13:
> > https://lore.kernel.org/r/20240805-reuse-v13-0-aaeaa4d7d...@daynix.com
> >
> > Changes in v13:
> > - Added patch "s390x/pci: Check for multifunction after device
> > realization". I found SR-IOV devices, which are multifunction devices,
> > are not supposed to work at all with s390x on QEMU.
> > - Link to v12:
> > https://lore.kernel.org/r/20240804-reuse-v12-0-d3930c411...@daynix.com
> >
> > Changes in v12:
> > - Changed to ignore invalid PCI_SRIOV_NUM_VF writes as done for
> > PCI_SRIOV_CTRL_VFE.
> > - Updated the message for patch "hw/pci: Use -1 as the default value for
> > rombar". (Markus Armbruster)
> > - Link to v11:
> > https://lore.kernel.org/r/20240802-reuse-v11-0-fb83bb8c1...@daynix.com
> >
> > Changes in v11:
> > - Rebased.
> > - Dropped patch "hw/pci: Convert rom_bar into OnOffAuto".
> > - Added patch "hw/pci: Use -1 as the default value for rombar".
> > - Added for-9.2 to give a testing period for possible breakage with
> > libvirt/s390x.
> > - Link to v10:
> > https://lore.kernel.org/r/20240627-reuse-v10-0-7ca0b8ed3...@daynix.com
> >
> > Changes in v10:
> > - Added patch "hw/ppc/spapr_pci: Do not reject VFs created after a PF".
> > - Added patch "hw/ppc/spapr_pci: Do not create DT for disabled PCI device".
> > - Added patch "hw/pci: Convert rom_bar into OnOffAuto".
> > - Dropped patch "hw/pci: Determine if rombar is explicitly enabled".
> > - Dropped patch "hw/qdev: Remove opts member".
> > - Link to v9:
> > https://lore.kernel.org/r/20240315-reuse-v9-0-67aa69af4...@daynix.com
> >
> > Changes in v9:
> > - Rebased.
> > - Restored '#include "qapi/error.h"' (Michael S. Tsirkin)
> > - Added patch "pcie_sriov: Ensure VF function number does not overflow"
> > to fix abortion with wrong PF addr.
> > - Link to v8:
> > https://lore.kernel.org/r/20240228-reuse-v8-0-282660281...@daynix.com
> >
> > Changes in v8:
> > - Clarified that "hw/pci: Replace -1 with UINT32_MAX for romsize" is
> > not a bug fix. (Markus Armbruster)
> > - Squashed patch "vfio: Avoid inspecting option QDict for rombar" into
> > "hw/pci: Determine if rombar is explicitly enabled".
> > (Markus Armbruster)
> > - Noted the minor semantics change for patch "hw/pci: Determine if
> > rombar is explicitly enabled". (Markus Armbruster)
> > - Link to v7:
> > https://lore.kernel.org/r/20240224-reuse-v7-0-29c14bcb9...@daynix.com
> >
> > Changes in v7:
> > - Replaced -1 with UINT32_MAX when expressing uint32_t.
> > (Markus Armbruster)
> > - Added patch "hw/pci: Replace -1 with UINT32_MAX for romsize".
> > - Link to v6:
> > https://lore.kernel.org/r/20240220-reuse-v6-0-2e42a28b0...@daynix.com
> >
> > Changes in v6:
> > - Fixed migration.
> > - Added patch "pcie_sriov: Do not manually unrealize".
> > - Restored patch "pcie_sriov: Release VFs failed to realize" that was
> > missed in v5.
> > - Link to v5:
> > https://lore.kernel.org/r/20240218-reuse-v5-0-e4fc1c19b...@daynix.com
> >
> > Changes in v5:
> > - Added patch "hw/pci: Always call pcie_sriov_pf_reset()".
> > - Added patch "pcie_sriov: Reset SR-IOV extended capability".
> > - Removed a reference to PCI_SRIOV_CTRL_VFE in hw/nvme.
> > (Michael S. Tsirkin)
> > - Noted the impact on the guest of patch "pcie_sriov: Do not reset
> > NumVFs after unregistering VFs". (Michael S. Tsirkin)
> > - Changed to use pcie_sriov_num_vfs().
> > - Restored pci_set_power() and changed it to call pci_set_enabled() only
> > for PFs with an expalanation. (Michael S. Tsirkin)
> > - Reordered patches.
> > - Link to v4:
> > https://lore.kernel.org/r/20240214-reuse-v4-0-89ad093a0...@daynix.com
> >
> > Changes in v4:
> > - Reverted the change to pci_rom_bar_explicitly_enabled().
> > (Michael S. Tsirkin)
> > - Added patch "pcie_sriov: Do not reset NumVFs after unregistering VFs".
> > - Added patch "hw/nvme: Refer to dev->exp.sriov_pf.num_vfs".
> > - Link to v3:
> > https://lore.kernel.org/r/20240212-reuse-v3-0-8017b689c...@daynix.com
> >
> > Changes in v3:
> > - Extracted patch "hw/pci: Use -1 as a default value for rombar" from
> > patch "hw/pci: Determine if rombar is explicitly enabled"
> > (Philippe Mathieu-Daudé)
> > - Added an audit result of PCIDevice::rom_bar to the message of patch
> > "hw/pci: Use -1 as a default value for rombar"
> > (Philippe Mathieu-Daudé)
> > - Link to v2:
> > https://lore.kernel.org/r/20240210-reuse-v2-0-24ba2a502...@daynix.com
> >
> > Changes in v2:
> > - Reset after enabling a function so that NVMe VF state gets updated.
> > - Link to v1:
> > https://lore.kernel.org/r/20240203-reuse-v1-0-5be8c5ce6...@daynix.com
> >
> > ---
> > Akihiko Odaki (11):
> > hw/ppc/spapr_pci: Do not create DT for disabled PCI device
> > hw/ppc/spapr_pci: Do not reject VFs created after a PF
> > s390x/pci: Avoid creating zpci for VFs
> > s390x/pci: Allow plugging SR-IOV devices
> > s390x/pci: Check for multifunction after device realization
> > pcie_sriov: Do not manually unrealize
> > pcie_sriov: Ensure VF addr does not overflow
> > pcie_sriov: Reuse SR-IOV VF device instances
> > pcie_sriov: Release VFs failed to realize
> > pcie_sriov: Remove num_vfs from PCIESriovPF
> > pcie_sriov: Register VFs after migration
> >
> > docs/pcie_sriov.txt | 8 ++-
> > include/hw/pci/pcie_sriov.h | 9 +--
> > hw/net/igb.c | 10 ++-
> > hw/nvme/ctrl.c | 22 +++---
> > hw/pci/pci.c | 21 +++++-
> > hw/pci/pcie_sriov.c | 159
> > ++++++++++++++++++++++++--------------------
> > hw/ppc/spapr_pci.c | 20 +++++-
> > hw/s390x/s390-pci-bus.c | 42 +++++++++---
> > hw/pci/trace-events | 2 +-
> > 9 files changed, 187 insertions(+), 106 deletions(-)
> > ---
> > base-commit: 7433709a147706ad7d1956b15669279933d0f82b
> > change-id: 20240129-reuse-faae22b11934
> >
> > Best regards,
