[PATCH 19/21] hw/net/vmxnet3: Remove VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS definition

[Philippe Mathieu-Daudé]

VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS was only used by the
hw_compat_2_5[] array, via the 'x-old-msi-offsets=on' property.
We removed all machines using that array, lets remove all the
code around VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS.

Signed-off-by: Philippe Mathieu-Daudé <phi...@linaro.org>
---
 hw/net/vmxnet3.c | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff --git a/hw/net/vmxnet3.c b/hw/net/vmxnet3.c
index 7abed664690..a527042ab32 100644
--- a/hw/net/vmxnet3.c
+++ b/hw/net/vmxnet3.c
@@ -42,18 +42,13 @@
 #define VMXNET3_MSIX_BAR_SIZE 0x2000
 
 /* Compatibility flags for migration */
-#define VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS_BIT 0
-#define VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS \
-    (1 << VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS_BIT)
 #define VMXNET3_COMPAT_FLAG_DISABLE_PCIE_BIT 1
 #define VMXNET3_COMPAT_FLAG_DISABLE_PCIE \
     (1 << VMXNET3_COMPAT_FLAG_DISABLE_PCIE_BIT)
 
 #define VMXNET3_EXP_EP_OFFSET (0x48)
-#define VMXNET3_MSI_OFFSET(s) \
-    ((s)->compat_flags & VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS ? 0x50 : 0x84)
-#define VMXNET3_MSIX_OFFSET(s) \
-    ((s)->compat_flags & VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS ? 0 : 0x9c)
+#define VMXNET3_MSI_OFFSET    (0x84)
+#define VMXNET3_MSIX_OFFSET   (0x9c)
 #define VMXNET3_DSN_OFFSET     (0x100)
 
 #define VMXNET3_BAR0_IDX      (0)
@@ -61,8 +56,7 @@
 #define VMXNET3_MSIX_BAR_IDX  (2)
 
 #define VMXNET3_OFF_MSIX_TABLE (0x000)
-#define VMXNET3_OFF_MSIX_PBA(s) \
-    ((s)->compat_flags & VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS ? 0x800 : 0x1000)
+#define VMXNET3_OFF_MSIX_PBA   (0x1000)
 
 /* Link speed in Mbps should be shifted by 16 */
 #define VMXNET3_LINK_SPEED      (1000 << 16)
@@ -2123,8 +2117,8 @@ vmxnet3_init_msix(VMXNET3State *s)
                         &s->msix_bar,
                         VMXNET3_MSIX_BAR_IDX, VMXNET3_OFF_MSIX_TABLE,
                         &s->msix_bar,
-                        VMXNET3_MSIX_BAR_IDX, VMXNET3_OFF_MSIX_PBA(s),
-                        VMXNET3_MSIX_OFFSET(s), NULL);
+                        VMXNET3_MSIX_BAR_IDX, VMXNET3_OFF_MSIX_PBA,
+                        VMXNET3_MSIX_OFFSET, NULL);
 
     if (0 > res) {
         VMW_WRPRN("Failed to initialize MSI-X, error %d", res);
@@ -2222,7 +2216,7 @@ static void vmxnet3_pci_realize(PCIDevice *pci_dev, Error 
**errp)
     /* Interrupt pin A */
     pci_dev->config[PCI_INTERRUPT_PIN] = 0x01;
 
-    ret = msi_init(pci_dev, VMXNET3_MSI_OFFSET(s), VMXNET3_MAX_NMSIX_INTRS,
+    ret = msi_init(pci_dev, VMXNET3_MSI_OFFSET, VMXNET3_MAX_NMSIX_INTRS,
                    VMXNET3_USE_64BIT, VMXNET3_PER_VECTOR_MASK, NULL);
     /* Any error other than -ENOTSUP(board's MSI support is broken)
      * is a programming error. Fall back to INTx silently on -ENOTSUP */
@@ -2473,8 +2467,6 @@ static const VMStateDescription vmstate_vmxnet3 = {
 
 static const Property vmxnet3_properties[] = {
     DEFINE_NIC_PROPERTIES(VMXNET3State, conf),
-    DEFINE_PROP_BIT("x-old-msi-offsets", VMXNET3State, compat_flags,
-                    VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS_BIT, false),
     DEFINE_PROP_BIT("x-disable-pcie", VMXNET3State, compat_flags,
                     VMXNET3_COMPAT_FLAG_DISABLE_PCIE_BIT, false),
 };
-- 
2.47.1