On 07/08/2011 02:45 AM, Tim Roberts wrote:
yorick<yorick.bru...@gmail.com> wrote:
I'm trying to access a hardware board of my company through a serial
connection using a Python script and the pyserial module.
The board to which I'm trying to connect works correctly with serial
as some other guys did some TCL scripts to manage it.
My problem is that every time I open a new connection, the device is
reset. I'd like to not have the device reset.
I'm not sure what that means. The RS-232 standard does not have the
concept of "reset". What is it that triggers a device reset?
While not a "reset" per-se, it might be triggered by the RTS/CTS,
DSR/DTR, or carrier-detect pins depending on the configuration.
Without the code and with minimal pySerial experience, I don't
know whether opening a serial-port in pySerial automatically
lights up one of those aux. lines and unsignals it when the
connection is closed. If the device expects a "power on" signal
on one of those pins, I'd start by looking to see if pySerial's
.close() drops the signal on those pins and if it offers a way to
keep the signal high while releasing the port. Otherwise, you
may have to open once, do all your work and only close the port
when you're done (and the device can be reset)
-tkc
--
http://mail.python.org/mailman/listinfo/python-list
