Hi,
I was trying to make to work directly l i2c with python with the
calls ioctl. But I have of the problems and I do not succeed to go
ahead.
this and l error
[EMAIL PROTECTED] /usr/local/wrap]129# python pcf8591_ioctl.py
Reading from 4 ch 8 bit A/D converter PCF8591
Traceback (most recent call last):
File "pcf8591_ioctl.py", line 269, in ?
main()
File "pcf8591_ioctl.py", line 229, in main
if i2c_open () < 0:
File "pcf8591_ioctl.py", line 168, in i2c_open
fcntl.ioctl(i2c_fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETGET_OUTPUT), 0,
iomask)
TypeError: ioctl requires a file or file descriptor, an integer and
optionally a integer or buffer argument
the code
import fcntl
import os
###################################
#etrax.h
ETRAXGPIO_IOCTYPE = 43
GPIO_MINOR_A = 0
GPIO_MINOR_B = 1
GPIO_MINOR_LEDS = 2
GPIO_MINOR_G = 3
GPIO_MINOR_LAST = 3
IO_READBITS = 0x1
IO_SETBITS = 0x2
IO_CLRBITS = 0x3
IO_HIGHALARM = 0x4
IO_LOWALARM = 0x5
IO_CLRALARM = 0x6
IO_LEDACTIVE_SET = 0x7
IO_READDIR = 0x8
IO_SETINPUT = 0x9
IO_SETOUTPUT = 0xA
IO_LED_SETBIT = 0xB
IO_LED_CLRBIT = 0xC
IO_SHUTDOWN = 0xD
IO_GET_PWR_BT = 0xE
IO_CFG_WRITE_MODE = 0xF
def IO_CFG_WRITE_MODE_VALUE(msb, data_mask, clk_mask):
( (((msb)&1) << 16) | (((data_mask) &0xFF) << 8) | ((clk_mask) &
0xFF) )
def IO_CFG_WRITE_MODE_VALUE(msb, data_mask, clk_mask):
( (((msb)&1) << 16) | (((data_mask) &0xFF) << 8) | ((clk_mask) &
0xFF) )
IO_READ_INBITS = 0x10
IO_READ_OUTBITS = 0x11
IO_SETGET_INPUT = 0x12
IO_SETGET_OUTPUT = 0x13
#######################################
#######################################
#ioctl.h
_IOC_NRBITS = 8
_IOC_TYPEBITS= 8
_IOC_SIZEBITS =14
_IOC_DIRBITS = 2
_IOC_NRMASK = ((1 << _IOC_NRBITS)-1)
_IOC_TYPEMASK = ((1 << _IOC_TYPEBITS)-1)
_IOC_SIZEMASK =((1 << _IOC_SIZEBITS)-1)
_IOC_DIRMASK =((1 << _IOC_DIRBITS)-1)
_IOC_NRSHIFT =0
_IOC_TYPESHIFT =(_IOC_NRSHIFT+_IOC_NRBITS)
_IOC_SIZESHIFT =(_IOC_TYPESHIFT+_IOC_TYPEBITS)
_IOC_DIRSHIFT =(_IOC_SIZESHIFT+_IOC_SIZEBITS)
_IOC_NONE=0
_IOC_WRITE=1
_IOC_READ=2
def _IOC(dir,type,nr,size):
(((dir) << _IOC_DIRSHIFT) |
((type) << _IOC_TYPESHIFT) |
((nr) << _IOC_NRSHIFT) |
((size) << _IOC_SIZESHIFT))
def _IO(type,nr):
_IOC(_IOC_NONE,(type),(nr),0)
def _IOR(type,nr,size):
_IOC(_IOC_READ,(type),(nr),sizeof(size))
def _IOW(type,nr,size):
_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
def _IOWR(type,nr,size):
_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
def _IOC_DIR(nr):
(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
def _IOC_TYPE(nr):
(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
def _IOC_NR(nr):
(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
def _IOC_SIZE(nr):
(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
def IOC_IN():
(_IOC_WRITE << _IOC_DIRSHIFT)
def IOC_OUT():
(_IOC_READ << _IOC_DIRSHIFT)
def IOC_INOUT():
((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
def IOCSIZE_MASK():
(_IOC_SIZEMASK << _IOC_SIZESHIFT)
def IOCSIZE_SHIFT():
(_IOC_SIZESHIFT)
######################################
######################################
######################################
I2C_DATA_LINE = 1<<24
I2C_CLOCK_LINE = 1<<25
#Get the SDA line state
def i2c_getbit():
value=fcntl.ioctl(i2c_fd, _IO(ETRAXGPIO_IOCTYPE, IO_READBITS))
if ((value&(I2C_DATA_LINE))==0):
return 0
else:
return 1
#Set the SDA line as output
def i2c_dir_out():
iomask = I2C_DATA_LINE
fcntl.ioctl(i2c_fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETGET_OUTPUT), iomask)
#Set the SDA line as input
def i2c_dir_in():
iomask = I2C_DATA_LINE
fcntl.ioctl(i2c_fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETGET_INPUT), iomask)
#Set the SDA line state
def i2c_data(state):
if (state==1):
i2c_dir_in()
else:
i2c_dir_out()
fcntl.ioctl(i2c_fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS),
I2C_DATA_LINE)
#Set the SCL line state
def i2c_clk(state):
if (state==1):
ioctl(i2c_fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS),
I2C_CLOCK_LINE)
else:
ioctl(i2c_fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS),
I2C_CLOCK_LINE)
#Read a byte from I2C bus and send the ack sequence
#Put islast = 1 is this is the last byte to receive from the slave
def i2c_inbyte(islast):
value = 0
#Read data byte
i2c_clk(0)
i2c_dir_in()
for i in range (0,5):
i2c_clk(1)
bitvalue = i2c_getbit()
value |= bitvalue
if (i<7):
value = 1
i2c_clk(0)
if (islast==0):
#Send Ack if is not the last byte to read
i2c_dir_out()
i2c_data(0)
i2c_clk(1)
i2c_clk(0)
i2c_dir_in()
else:
#Doesn't send Ack if is the last byte to read
i2c_dir_in()
i2c_clk(1)
i2c_clk(0)
return value
#Open the GPIOB dev
def i2c_open():
i2c_fd = os.open("/dev/gpiog", os.O_RDWR)
iomask = I2C_CLOCK_LINE
fcntl.ioctl(i2c_fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETGET_OUTPUT), iomask)
iomask = I2C_DATA_LINE
fcntl.ioctl(i2c_fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETGET_INPUT), iomask)
fcntl.ioctl(i2c_fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS),
I2C_DATA_LINE)
i2c_dir_in()
i2c_clk(1)
return i2c_fd
#Close the GPIOB dev
def i2c_close():
i2c_dir_in()
i2c_fd.close()
#Send a start sequence to I2C bus
def i2c_start():
i2c_clk(0)
i2c_data(1)
i2c_clk(1)
i2c_data(0)
#Send a stop sequence to I2C bus
def i2c_stop():
i2c_clk(0)
i2c_data(0)
i2c_clk(1)
i2c_data(1)
#Send a byte to the I2C bus and return the ack sequence from slave rtc
#0 = Nack, 1=Ack
def i2c_outbyte():
i2c_clk(0)
for i in range (0,8):
if (x & 0x80):
i2c_data(1)
else:
i2c_data(0)
i2c_clk(1)
i2c_clk(0)
x <<= 1
i2c_dir_in()
i2c_clk(1)
ack=i2c_getbit()
i2c_clk(0)
if (ack==0):
return 1
else:
return 0
#PCF8591 address scheme
#| 1 | 0 | 0 | 1 | A2 | A1 | A0 | R/W |
#| i2c_fixed | i2c_addr | 1/0 |
def main ():
i2c_fixed = 0x09
i2c_addr = 0x01
print "Reading from 4 ch 8 bit A/D converter PCF8591"
if i2c_open () < 0:
print "i2c open error"
return 1
ch = 0
while "azz":
i2c_start ()
if i2c_outbyte ((i2c_fixed<<4)|(i2c_addr<<1)|0) == 0:
print "NACK received"
i2c_stop ()
continue
if i2c_outbyte (ch) == 0:
print "NACK received"
i2c_stop ()
continue
i2c_stop ()
i2c_start ()
if i2c_outbyte((i2c_fixed<<4)|(i2c_addr<<1)|1) == 0:
print "NACK received"
i2c_stop ()
continue
i2c_inbyte (0)
value = i2c_inbyte (1)
i2c_stop ()
print "CH%d = %.4fv (%.4f hex/n)" %
(ch,value*0.012941,value)
ch += 1
if ch == 4:
break;
i2c_close ()
return 0
main()
tnx all
--
http://mail.python.org/mailman/listinfo/python-list
