Rob wrote:
> Hi all,
>
> I am fairly new to python, but not programming and embedded. I am
> having an issue which I believe is related to the hardware, triggered
> by the software read I am doing in pySerial. I am sending a short
> message to a group of embedded boxes daisy chained via the serial port.
> When I send a 'global' message, all the connected units should reply
> with their Id and Ack in this format '0 Ack' To be certain that I
> didn't miss a packet, and hence a unit, I do the procedure three times,
> sending the message and waiting for a timeout before I run through the
> next iteration. Frequently I get through the first two iterations
> without a problem, but the third hangs up and crashes, requiring me to
> remove the Belkin USB to serial adapter, and then reconnect it. Here
> is the code:
>
> import sys, os
> import serial
> import sret
> import time
>
> from serial.serialutil import SerialException
> ####################################################################
> #### GetAck Procedure
> ####################################################################
> def GetAck(p):
> response = ""
>
> try:
> response = p.readline()
> except SerialException:
> print ">>>>>Timed out<<<<<"
> return -1
> res = response.split()
>
> #look for ack in the return message
> reslen = len(response)
> if reslen > 5:
> if res[1] == 'Ack':
> return res[0]
> elif res[1] == 'Nak':
> return 0x7F
> else:
> return -1
>
>
>>>>>> Snip <<<<<<
> ####################################################################
> #### GetNumLanes Procedure
> ####################################################################
> def GetNumLanes(Lanes):
> print "Looking for connected units"
> # give a turn command and wait for responses
> msg = ".g t 0 336\n"
>
> for i in range(3):
> port = OpenPort()
> time.sleep(3)
> print port.isOpen()
> print "Request #%d" % (i+1)
> try:
> port.writelines(msg)
> except OSError:
> print "Serial port failure. Power cycle units"
> port.close()
> sys.exit(1)
>
> done = False
> # Run first connection check
> #Loop through getting responses until we get a -1 from GetAck
> while done == False:
> # lane will either be -1 (timeout), 0x7F (Nak),
> # or the lane number that responded with an Ack
> lane = GetAck(port)
> if lane >= '0':
> if False == Lanes.has_key(lane):
> Lanes[lane] = True
> else:
> done = True
> port.close()
> time.sleep(3)
>
> # Report number of lanes found
> NumLanes = len(Lanes)
> if NumLanes == 1:
> print "\n\nFound 1 unit connected"
> else:
> print "\n\nFound %d units connected" % NumLanes
>
> return NumLanes
>
>
>>>>>>> Snip <<<<<<
> ####################################################################
> #### Main Program Code Section
> ####################################################################
>
> #open the serial port
> # capture serial port errors from trying to open the port
>
> port = OpenPort()
>
> # If we got to here, the port exists. Set the baud rate and timeout
> values
>
> # I need to determine how many lanes are on this chain
> # First send a turn command
>
> #Create a dictionary of lanes so I can check each lane's responses
> Lanes = {}
> #<><><><><><><><><><><><><><><><>
> # Call the lane finder utility
> NumLanes = GetNumLanes(Lanes)
> #<><><><><><><><><><><><><><><><>
>
> #if no lanes responded, exit from the utility
> if 0 == NumLanes:
> print "I can't find any units connected."
> print "Check your connections and try again"
> sys.exit(1)
>
> # list the lanes we have in our dictionary
> for n in Lanes:
> print "Lane - %s" % n
>
> Now, here is the error message that I get
>
> [EMAIL PROTECTED]:~/py$ ./Thex.py
> Looking for connected units
> True
> Request #1
> True
> Request #2
> Serial port failure. Power cycle units
> [EMAIL PROTECTED]:~/py$ ./Thex.py
> The serial port is unavailable.
> Disconnect your USB to Serial adapter, Then
> reconnect it and try again.
> [EMAIL PROTECTED]:~/py$
>
> Does anyone have any ideas?
>
> Thanks,
>
> rob < [EMAIL PROTECTED] >
Where is OpenPort ?
hg
--
http://mail.python.org/mailman/listinfo/python-list
