Hi Marko, You may want to tweak ray_trace_gain setting:
https://pymolwiki.org/index.php/Ray_Trace_Gain - Piotr On Thu, May 25, 2017 at 6:53 AM, Marko Hyvonen <mh...@cam.ac.uk> wrote: > Hello Pymolers, > > I seem to fail to find the setting (which I recall having used before) > to get stronger/thicker outlines in ray traced images when using mode 1, > 2 and 3, in particular when rendering larger images. The lines seem to > be defined as pixels, as they get thinner the bigger the image is. Is is > possible to define this, and if so, how? > > many thanks in advance, Marko > > -- > > Marko Hyvonen > Department of Biochemistry, University of Cambridge > mh...@cam.ac.uk > +44-(0)1223-766 044 > @HyvonenGroup > http://www-cryst.bioc.cam.ac.uk/groups/hyvonen > > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > PyMOL-users mailing list (PyMOL-users@lists.sourceforge.net) > Info Page: https://lists.sourceforge.net/lists/listinfo/pymol-users > Archives: http://www.mail-archive.com/pymol-users@lists.sourceforge.net ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ PyMOL-users mailing list (PyMOL-users@lists.sourceforge.net) Info Page: https://lists.sourceforge.net/lists/listinfo/pymol-users Archives: http://www.mail-archive.com/pymol-users@lists.sourceforge.net
