Well, it took only a couple of hours (1+ days) to figure this out.
Scratch the real problem.
It turned out to be a stale and conflicting installation of python2.4
that I was not aware of. After removing the mess, pymol compiles without
any issues and works just fine. That was clearly a real problem - for me
and my machine :-)
Gerwald
DeLano Scientific wrote:
Gerwald,
Unfortunately, you are not the first to report trouble on FC6, so this is
clearly real problem.
However, with our 64-bit FC6 install, PyMOL works fine -- and others have
reported success as well. In other words, there is some problem here other
than simply, 64 bit + FC6 + PyMOL, but as of yet, no one has figured out
what it is...
The freeglut error is a separate cause for concern. That means you do not
have compatible vendor-supplied OpenGL drivers installed, and thus, PyMOL
will run rather slowly.
As for 64-bit, there are no official 64-bit builds yet, but source code can
definitely be built in 64-bit mode on Linux.
Cheers,
Warren
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf
Of gerwald jogl
Sent: Friday, May 11, 2007 10:57 AM
To: [email protected]
Subject: [PyMOL] frozen command line on amd64
Hi,
Pymol is behaving interestingly on my amd64 dual core, fedora
core6 updated, python2.4.
I have tried the precompiled version 0.99rev9 and the latest
beta for linux-32bit and the only 64-bit I could see dated may 2006.
The binary comes up as usual, but the tcl command line is
frozen and will not accept any keyport input. That's
obviously not helpful.
I wonder if someone else has seen this behavior or has ideas
how to go about it.
Thanks,
Gerwald
below more detailed info...
this is the pymol output on startup, note the freeglut error:
freeglut (/xsoft/pymol-0.99rev9/pymol.exe): Unable to create
direct context rend ering for window 'PyMOL Viewer'
This may hurt performance.
PyMOL(TM) Incentive Product - Copyright (C) 2006 DeLano
Scientific LLC.
This PyMOL Executable Build is exclusively available to
PyMOL Sponsors with current PyMOL Maintenance and/or Support
Subscriptions. Only designated PyMOL Power, Casual, and
Developer Users covered within the scope of such a
Subscription may legally use this software product.
Any other usage is specifically prohibited and may
constitute a violation of United States and international
Copyright laws.
This Executable Build integrates and extends Open-Source
PyMOL 0.99rev9.
OpenGL graphics engine:
GL_VENDOR: NVIDIA Corporation
GL_RENDERER: GeForce 7900 GT/GTO/PCI/SSE2
GL_VERSION: 1.4 (2.1.0 NVIDIA 97.55)
Adapting to GeForce hardware.
Detected 2 CPUs. Enabled multithreaded rendering.
----------------
In addition (no I don't really have ample time to spend on
this), here is how far the simple-minded approach to compile
the source code leads on this machine:
Comments on this would also be appreciated :-)
This is the output from: python setup.py build.
gcc -pthread -fno-strict-aliasing -DNDEBUG -g -O3 -Wall
-Wstrict-prototypes -fPI C -D_PYMOL_MODULE -D_PYMOL_INLINE
-D_PYMOL_FREETYPE -D_HAVE_LIBPNG -Iov/src -Ila yer0 -Ilayer1
-Ilayer2 -Ilayer3 -Ilayer4 -Ilayer5
-I/usr/include/freetype2 -I/us
r/local/include/python2.4 -c layer1/PConv.c -o
build/temp.linux-x86_64-2.4/layer 1/PConv.o -ffast-math
-funroll-loops -O3 In file included from
/usr/local/include/python2.4/Python.h:55,
from layer0/os_python.h:28,
from layer1/PConv.c:18:
/usr/local/include/python2.4/pyport.h:612:2: error: #error
"LONG_BIT definition appears wrong for platform (bad
gcc/glibc config?)."
error: command 'gcc' failed with exit status 1
--------------------------------------------------------------
-----------
This SF.net email is sponsored by DB2 Express Download DB2
Express C - the FREE version of DB2 express and take control
of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
PyMOL-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/pymol-users
