On 5/25/20 1:05 PM, Alexandre Derumier wrote: > Currently, when a trunks is defined, the vlan tag is not used > for pvid with vlan-aware bridge. (It's ok with ovs switch) > > example: > > net0: e1000=BA:90:68:B8:CF:F5,bridge=vmbr1,tag=2,trunks=2-11 > > before > ------ > tap100i0 2-11 > > after > ----- > tap100i0 2 PVID Egress Untagged > 3-11 > > No regression for other configurations: > > net0: e1000=BA:90:68:B8:CF:F5,bridge=vmbr1 > > before > ------ > tap100i0 1 PVID Egress Untagged > 2-4094 > > after > ----- > tap100i0 1 PVID Egress Untagged > 2-4094 > > net0: e1000=BA:90:68:B8:CF:F5,bridge=vmbr1,tag=2 > > before > ------ > tap100i0 2 PVID Egress Untagged > > after > ----- > tap100i0 2 PVID Egress Untagged > > net0: e1000=BA:90:68:B8:CF:F5,bridge=vmbr1,trunks=2-11 > > before > ------ > tap100i0 1 PVID Egress Untagged > 2-11 > > after > ----- > tap100i0 1 PVID Egress Untagged > 2-11 > > Signed-off-by: Alexandre Derumier <aderum...@odiso.com> > --- > src/PVE/Network.pm | 36 +++++++++++++++++------------------- > 1 file changed, 17 insertions(+), 19 deletions(-) > >
applied, thanks! _______________________________________________ pve-devel mailing list pve-devel@pve.proxmox.com https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
